McGill 2-1/2"-ID NEEDLE ROLLER BEARINGS MCG MR-40
McGill® CAGEROL® machined race needle bearings are manufactured from bearing quality steel. Most sizes use crowned or end relieved, rollers to help reduce end stresses and allows for greater misalignment. The rollers are separated by a steel retainer (cage) to help achieve higher speeds and provide a lubricant reservoir. CAGEROL® bearings are constructed with radial lubrication hole and groove on the outer and optional inner raceway (MI series) for relubrication through the housing or shaft. Other options include a variety of seal configurations to either help prevent contaminant entry or contain the lubricant.
-
BrandMcGill®
-
UPC726166067540
-
Manufacturer Part Number5454000000
-
CountryUSA
-
Load Capacity27200 lb Dynamic/52100 lb Static
-
Cage MaterialSteel
-
Temperature Rating-20 to 250 deg F
-
Maximum Speed4800 rpm
-
Closure TypeUnsealed
-
TypeHeavy Duty Standard
-
Width1-3/4 in
-
SeriesMR Series
-
Number of Rows1
-
Bearing Material52100 Steel
-
Outside Diameter3-1/4 in
-
Bore Diameter2-1/2 in
- Machined outer race
- Needle roller with end relief
- Annular lubrication groove and holes
- Factory grease f
-
Alternative Part NumberMR 40
-
UNSPSC31171542
-
Package DescriptionEACH
-
Specification Sheet
-
Catalog
Recently Viewed
McGill® CAGEROL® machined race needle bearings are manufactured from bearing quality steel. Most sizes use crowned or end relieved, rollers to help reduce end stresses and allows for greater misalignment. The rollers are separated by a steel retainer (cage) to help achieve higher speeds and provide a lubricant reservoir. CAGEROL® bearings are constructed with radial lubrication hole and groove on the outer and optional inner raceway (MI series) for relubrication through the housing or shaft. Other options include a variety of seal configurations to either help prevent contaminant entry or contain the lubricant.
McGill® CAGEROL® machined race needle bearings are manufactured from bearing quality steel. Most sizes use crowned or end relieved, rollers to help reduce end stresses and allows for greater misalignment. The rollers are separated by a steel retainer (cage) to help achieve higher speeds and provide a lubricant reservoir. CAGEROL® bearings are constructed with radial lubrication hole and groove on the outer and optional inner raceway (MI series) for relubrication through the housing or shaft. Other options include a variety of seal configurations to either help prevent contaminant entry or contain the lubricant.
Browning® 1080621 Type S2 Split-Taper Bushing, 3-15/16 in Dia Bore, 4.27 in Dia Small End/4-5/8 in Dia Large End Dia Barrel, 6-3/8 in Dia Flange, 6-3/4 in OAL, Sintered Steel
External key provides positive drive with no torque on the cap screws. We offer high torque carrying capacity. Double split barrel improves true concentricity. The shaft is gripped with positive clamp fit.
2-TON L-90 10'-LIFT CHAIN HOIST
Gator® GatorGrit 3314 Coated Sanding Sheet, 11 in L x 9 in W, 320 Grit, Garnet Abrasive, Paper Backing
Gator® GatorGrit 3314 Coated Sanding Sheet, 11 in L x 9 in W, 320 Grit, Garnet Abrasive, Paper Backing
POST PROTECTORS-VESG818SND>
