PIX B-144-K V-BELT, B-KEVLAR ©, 5/8 " TOP WIDTH, 147'" OUTSIDE LENGTH
KEVLAR© IS A HIGH STRENGTH BELT THAT CAN WITHSTAND HIGHER SHOCK LOADS, REVERSE BENDING AND TWISTING OVER LONGER PERIODS OF TIME. THE STRENGTH COMES FROM THE CORDS, WHICH IS A HIGH TENSILE STRENGTH ARAMID FIBER. THESE BELTS USE A SPECIAL OUTER DRY WRAP, WHICH MAKES THEM SUITABLE FOR CLUTCHING APPLICATIONS, LAWN MOWERS OR ANY DRIVES WITH FREQUENT STARTING & STOPPING.
-PIXB144K>
Recently Viewed
KEVLAR© IS A HIGH STRENGTH BELT THAT CAN WITHSTAND HIGHER SHOCK LOADS, REVERSE BENDING AND TWISTING OVER LONGER PERIODS OF TIME. THE STRENGTH COMES FROM THE CORDS, WHICH IS A HIGH TENSILE STRENGTH ARAMID FIBER. THESE BELTS USE A SPECIAL OUTER DRY WRAP, WHICH MAKES THEM SUITABLE FOR CLUTCHING APPLICATIONS, LAWN MOWERS OR ANY DRIVES WITH FREQUENT STARTING & STOPPING.
-PIXB144K>
MORSE® 15124 1437 General Purpose Screw Machine Drill, #41 Drill - Wire, 0.096 in Drill - Decimal Inch, HSS, Bright
Browning® Classical Gripbelt® 1025824 AK Series Type 1 Single Groove Sheave, Finished Bore, 1/2 in Dia Bore, 2 in OD, 2 in (A)/1.46 in (3L) Dia Pitch, 21/32 in W Face
Browning® Classical Gripbelt® 1025824 AK Series Type 1 Single Groove Sheave, Finished Bore, 1/2 in Dia Bore, 2 in OD, 2 in (A)/1.46 in (3L) Dia Pitch, 21/32 in W Face
• Shaft Diameter (Inside Diameter): 40.00 mm (1.575 inches)
• Housing Bore (Outside Diameter): 80.00 mm (3.150 inches)
• Seal Width (Thickness): 12.00 mm (0.472 inches)
Browning® 1079847 Split Taper Bushing, 1-1/8 in Dia Bore, 2.7657 in Small End/2.875 in Large End Dia Barrel, 4-1/8 in Dia Flange, 2-1/2 in OAL, Sintered Steel
External key provides positive drive with no torque on the cap screws. We offer high torque carrying capacity. Double split barrel improves true concentricity. The shaft is gripped with positive clamp fit.
1" CONVOLUTED SLIT WIRE LOOM (FT)-GVIALZC1 >
