BALL BEARINGS
DOUBLE SHIELDED BALL BEARING-GUL60032Z >
DOUBLE SEALED BALL BEARINGS
DOUBLE SEALED BALL BEARING-NTN6003LL >
DOUBLE SHIELDED BALL BEARING-NTN6003ZZ >
6003-ZZ Radial/Deep Groove Ball Bearing - Straight Bore, 17 mm ID, 35 mm OD, 10 mm Width, Double Shielded, Without Snap Ring
DOUBLE SEALED BALL BEARINGS-GEN6003ZZ>
DOUBLE SEALED BALL BEARING-GUL60042RS >
6004-2RS SKF Brand Sealed Ball Bearings 20x42x12
DOUBLE SEALED BALL BEARING WITH SNAP RING-GUL60042RSNR >
DOUBLE SHIELDED BALL BEARING-GUL60042Z >
DOUBLE SEALED BALL BEARING-NTN6004LL >
DOUBLE SEALED BALL BEARINGS WSR-SNR6004NREE>
DOUBLE SEALED BALL BEARINGS
DOUBLE SHIELDED BALL BEARING-NTN6004ZZ >
DOUBLE SEALED BALL BEARING-GUL60052RS >
6005-2-RS is a standard extra-light duty, single-row deep groove radial ball bearing equipped with rubber contact seals on both sides
• Bore Diameter (Inner Ring): 15 mm
• Outside Diameter: 32 mm
• Width: 9 mm
• Enclosure Type: Double Shielded (Metal shields on both sides, abbreviated as ZZ or 2Z)
• Lubrication: Pre-greased from the factory
• Material: Typically constructed from high-carbon chrome steel
• Max Speed: Up to approximately 24,000 to 28,000 RPM
Bore Diameter: 25 mm Outside Diameter: 47 mm Width: 12 mm Closure Type: Double-sealed (rubber contact seals on both sides) Cage Type: JE designation indicating a pressed steel or specialized light metal/brass-related configuration optimized for electric motor quality.
DOUBLE SEALED BALL BEARING WITH SNAP RING-GUL60052RSNR >
DOUBLE SHIELDED BALL BEARING-GUL60052Z >
DOUBLE SEALED BALL BEARING-NTN6005LL >
DOUBLE SHIELDED BALL BEARINGS-FAG6005ZZ>
DOUBLE SHIELDED BALL BEARING-NTN6005ZZ >
6006-2-RS a standard extra-light duty, single-row deep groove radial ball bearing equipped with rubber contact seals on both sides.
• Inside Diameter (Bore): 30 mm (1.181 inches)
• Outside Diameter (OD): 55 mm (2.165 inches)
• Width: 13 mm (0.512 inches)
• Max Speed: ~7,000 to 8,000 RPM (restricted by rubber contact seal friction)
• Material: Premium chrome steel (SAE-52100)
Bore Diameter (Inner ID): 30 mm Outside Diameter (OD): 55 mm Width: 13 mm Weight: Approximately 0.12 kg (0.28 lbs.)
DOUBLE SEALED BALL BEARING-GUL60062RS >
Recently Viewed
O-rings are endless, ring shaped sealing elements with a circular cross-section that are manufactured from elastomer materials or PTFE. The designation of an O-ring is derived from the dimensions of its inner diameter and cord width in millimeters, along with the name of the material and its Shore A hardness.
GP® 2113M Standard Length Socket, 1/2 in, 13 mm, 12 Points
Browning® 1031830 AK Series Type 1 FHP Sheave, 1 in Finished Bore, 2.55 in OD, 2 Grooves, 2-1/2 in (A)/1.96 in (3L) Dia Pitch, 1-3/8 in W Face
Browning® offers an extensive multi groove sheave offering. This includes Browning® SPLIT TAPER® and QD® bushing designs. This means maximum economy and versatility for your application. Truly the right drive every time! Our exclusive B5V® sheaves have a patented design that offers 5 V hp in the economy of a B section sheave. B5V® sheaves serve 90% of all applications from 10 to 150 hp. This can reduce cost up to 40% over traditional designs.
50-B-20-F-1-5/8 20 Tooth Sprockets For #50
20 TOOTH SPROCKETS FOR #50 CHAIN-IDC50B20F15/8 >
GP® 1026D Deep Length Socket, 3/8 in Drive, 13/16 in Socket, 6 Points
MORSE® 44205 4552 Center Cutting Extra Long Length Single End End Mill, 5/8 in Dia Cutter, 4 in Length of Cut, 4 Flutes, 5/8 in Dia Shank, 6-1/8 in OAL, Bright
