BALL BEARINGS
4459-00 Ball Thrust Bearing - Single-Direction, 0.7500 in Bore, 1.6560 in OD, 0.5470 in Width, Banded
UNGROUND THRUST BALL BEARING-GEN445900>
4460-00 Ball Thrust Bearing - Single-Direction, 0.8750 in Bore, 1.8910 in OD, 0.5940 in Width, Banded
UNGROUND THRUST BALL BEARING-GEN446000>
4462-00 Ball Thrust Bearing - Single-Direction, 1.0000 in Bore, 2.0160 in OD, 0.6400 in Width, Banded
UNGROUND THRUST BALL BEARING-GEN446200>
4464-00 Ball Thrust Bearing - Single-Direction, 1.0150 in Bore, 1.7500 in OD, 0.6250 in Width, Banded
UNGROUND THRUST BALL BEARING-GEN446400>
4465-00 an unground, single-direction, banded thrust series ball bearing
• Bore Diameter 1 (Shaft Washer): 1.0630 inches (27.00 mm)
• Bore Diameter 2 (Housing Washer): 1.0940 inches (27.788 mm)
• Outside Diameter: 1.9690 inches (50.013 mm)
• Overall Width / Height: 0.6250 inches (15.875 mm)
• Bearing Construction: Single row, full complement of hardened steel balls encased in a banded soft steel housing.
• Precision Class: Low Precision / Unground (ABEC 1 / ISO P0
4469-00 is an unground, single-direction, banded thrust series ball bearing.
• Bore Diameter 1 (Inner Ring): 1.2500 inches (31.75 mm)
• Bore Diameter 2: 1.2750 inches (32.385 mm)
• Outside Diameter: 2.3440 inches (59.538 mm)
• Overall Width / Height: 0.6250 inches (15.875 mm)
455511 Double Row industrial-grade, high-performance double-row angular contact radial ball bearing
DOUBLE ROW BALL BEARINGS WSR-GEN455511>
455512 Double Row industrial-grade, high-performance double-row angular contact radial ball bearing
DOUBLE ROW BALL BEARINGS WSR-GEN455512>
455605 Double Row industrial-grade, heavy-duty double-row angular contact radial ball bearing.
DOUBLE ROW BALL BEARINGS WSR-GEN455605>
455608 Double Row industrial-grade, heavy-duty double-row angular contact radial ball bearing
DOUBLE ROW BALL BEARING WSR-GEN455608>
455609 Double Row Ball Bearings industrial-grade, heavy-duty double-row angular contact radial ball bearing.
DOUBLE ROW BALL BEARINGS WSR-GEN455609>
477500 a vintage single-row, deep-groove ball bearing that features double steel shields and an outer snap ring.
The part number 550158 typically refers to a heavy-duty industrial or automotive oil seal cross-referenced across several major drivetrain and axle manufacturers.
479210-D 50-mm-ID Sph/OD Insert Bearing
Outer Diameter (OD): 100 mm (3.937 inches) Inner Diameter (Bore): 55 mm (or variations in inches depending on the exact sub-model) Width: 55.6 mm (2.189 inches) Locking Style: Features dual set screws on an extended inner ring for secure shaft mounting. Sealing: Equipped with high-performance standard seals (2F) to block out dust, grime, and oil.
488509 Wide Inner Race Ball Bearing With Snap Ring
WIDE INNER RACE BALL BEARING WITH SNAP RING-GUL488509 >
499502-H Double Sealed Ag Ball Bearing With Snap Ring
DOUBLE SEALED AG BALL BEARING WITH SNAP RING-GUL499502H >
5-B MRC specialized, vintage single-direction thrust ball bearing
In industrial manufacturing and mechanical engineering, MRC 5B is a specific model of a precision thrust ball bearing manufactured by the MRC Bearing Company (a brand under SKF). These are standard-grade components used in rotating machinery to handle axial loads.
Recently Viewed
Familiar and functional, Leviton® traditional wallplates are designed for use with traditional Leviton® devices. They represent styles and form factors that have stood the test of time. Their clean lines work in virtually any location, whether in new or retrofit construction and they install quickly and easily. Leviton® offers traditional wallplates in a vast array of colors and configurations.
RIDGID® 32985 104 Close Quarter Midget Tubing Cutter, 3/16 to 15/16 in Nominal, Ergonomic Grip Handle
The name says it all: the RIDGID Model 104 Close Quarters Tubing Cutter is specifically designed for use in restricted spaces on 3/16 to 5/16-inch diameter hard or soft copper, aluminum, brass or plastic tubing. The lightweight slide, wheel housing and large feed screw knob allow for smooth control of cutting pressure for clean cuts.
Weiler® 95013 Small Handle Scratch Brush, 2-1/4 in Brush, 8-3/4 in L x 1/2 in W Block, 5/8 in L Stainless Steel Trim
Weiler® 95013 Small Handle Scratch Brush, 2-1/4 in Brush, 8-3/4 in L x 1/2 in W Block, 5/8 in L Stainless Steel Trim
10-GROOVE BANDED 5-V-2500 V-BELT - PIX5V2500/10>
Brady® 65562 Hinged Mechanical Risk Gate Valve Lockout, Fits Min Handle Size: 5 in, -40 deg F Min Temperature
Gate valve lockout devices deny access and cover the valve handle. This device's unique knockout center fits OS&Y or "rising stem" valves.
DOUBLE ROW BALL BEARING-NTNDE0678CS12/5A >
