BALL BEARINGS
215-S-ZZ MRC BALL BEARINGS
Deep groove ball bearing
Single row deep groove ball bearings are the most widely used bearing type and are particularly versatile. They have low friction and are optimized for low noise and low vibration, which enables high rotational speeds. They can accommodate radial and axial loads in both directions, are easy to mount, and require less maintenance than many other bearing types.
Simple, versatile and robust design
Low friction
High-speed capability
Accommodate radial and axial loads in both directions
Require little maintenance
Bore diameter2.9528 in
Outside diameter5.1181 in
Width0.9843 in
215-SZ Single Row Ball Bearing
Inside Diameter (Bore): 75 mm (2.953 inches) Outside Diameter: 130 mm (5.118 inches) Width: 25 mm (0.984 inches) Closure Type: The "SZ" (or "SZZ") denotes double-sealed or double-shielded, which protects the rolling elements from dust and retains grease. Load Capacity: 14,900 lb. (Dynamic) and 11,000 lb. (Static)Max Speed: Up to 4,800 - 5,600 rpm
216 Double Open Face Ball Bearing
Inner Diameter (Bore): 80 mm Outer Diameter: 140 mm Overall Width: 26 mm Basic Dynamic Load Rating: 88 kN (approx. 19,780 lb.) Basic Static Load Rating: 85 kN (approx. 19,100 lb.) Limiting Speed: 5,000 RPM
2200-2-RS Straight-ID Self-align
STRAIGHT-ID SELF-ALIGN BALL BEARING-GUL22002RS >
2202-E-2-RS-1 Str-ID Self-aligning Bearing
Key Specifications Type: Self-aligning double-row ball bearing Seals: 2RS1 (synthetic rubber contact seals on both sides) Dimensions: 15 mm (bore) x 35 mm (outer diameter) x 14 mm (width)Misalignment tolerance: Accommodates static and dynamic angular shaft misalignments
2204-2-RS Straight-ID Self-align
STRAIGHT-ID SELF-ALIGN BALL BEARING-GUL22042RS >
2206 Str-ID Self Aligning Bearing
Self-aligning ball bearings have two rows of balls, a common sphered raceway in the outer ring and two deep uninterrupted raceway grooves in the inner ring. They are insensitive to angular misalignment of the shaft relative to the housing, which can be caused, for example, by shaft deflection.
Accommodate static and dynamic misalignment
Excellent high-speed performance
Excellent light load performance
Low friction
2206-2-RS Straight-ID Self-align
STRAIGHT-ID SELF-ALIGN BALL BEARING-GUL22062RS >
Recently Viewed
Pyramex® S2575SN Safety Eyewear, Anti-Scratch, Blue Mirror Lens, Wrap Around Frame, Polycarbonate Frame, ANSI Z87.1, CAN/CSA Z94.3-15, CE EN166, MIL-PRF 32432
Pyramex® S2575SN Safety Eyewear, Anti-Scratch, Blue Mirror Lens, Wrap Around Frame, Polycarbonate Frame, ANSI Z87.1, CAN/CSA Z94.3-15, CE EN166, MIL-PRF 32432
HCI Preferred Supplier 80209 Pressure Gauge, 0 to 600 psi Pressure, 1/4 in Connection, 2-1/2 in Dia Dial, +/-1.5 % Accuracy
HCI Preferred Supplier 80209 Pressure Gauge, 0 to 600 psi Pressure, 1/4 in Connection, 2-1/2 in Dia Dial, +/-1.5 % Accuracy
DOUBLE SEALED BALL BEARINGS-GEN2261288>
DOUBLE SEALED BALL BEARING-GUL63112RS >
Wilton® WL9-14270 Classic 400 Regular Duty Drop Forged C-Clamp, 5 in D Throat, 0 to 8-1/4 in Jaw Opening, 3/4 in Screw
Wilton Classic 400 Series C-Clamps are ideal for steel fabrication, industrial maintenance, and repair operations. Each C-Clamp is drop forged and features an ACME rolled spindle with Black Oxide Coating, replaceable Perma-Pads® and a v-grooved anvil for secure holding of all materials.
NIBCO® 852-020 1-Piece Solid Flange, 2 in Nominal, PVC, Thread Connection, 150 lb, 6 in OD, Domestic
NIBCO® 852-020 1-Piece Solid Flange, 2 in Nominal, PVC, Thread Connection, 150 lb, 6 in OD, Domestic
