BALL BEARINGS

DOUBLE SEALED BALL BEARINGS-GEN2140688>

DOUBLE SEALED BALL BEARINGS-GEN2146288>

Deep groove ball bearing
Single row deep groove ball bearings are the most widely used bearing type and are particularly versatile. They have low friction and are optimized for low noise and low vibration, which enables high rotational speeds. They can accommodate radial and axial loads in both directions, are easy to mount, and require less maintenance than many other bearing types.
Simple, versatile and robust design
Low friction
High-speed capability
Accommodate radial and axial loads in both directions
Require little maintenance

Bore diameter2.9528 in
Outside diameter5.1181 in
Width0.9843 in

Inside Diameter (Bore): 75 mm (2.953 inches) Outside Diameter: 130 mm (5.118 inches) Width: 25 mm (0.984 inches) Closure Type: The "SZ" (or "SZZ") denotes double-sealed or double-shielded, which protects the rolling elements from dust and retains grease. Load Capacity: 14,900 lb. (Dynamic) and 11,000 lb. (Static)Max Speed: Up to 4,800 - 5,600 rpm

DOUBLE SHIELDED BALL BEARINGS-GEN2150577>

DOUBLE SEALED BALL BEARINGS-GEN2150588>

DOUBLE SHIELDED BALL BEARING-GEN2150577>

DOUBLE SEALED LIGHT BALL BEARINGS-GEN2150688>

DOUBLE SHIELDED LIGHT BALL BEARING-GEN2150777>

DOUBLE SEALED LIGHT BALL BEARING-GEN2150788>

Inner Diameter (Bore): 80 mm Outer Diameter: 140 mm Overall Width: 26 mm Basic Dynamic Load Rating: 88 kN (approx. 19,780 lb.) Basic Static Load Rating: 85 kN (approx. 19,100 lb.) Limiting Speed: 5,000 RPM

DOUBLE OPEN FACE BALL BEARINGS-FAF216W>

DOUBLE SHIELDED BALL BEARINGS-GEN2180777>

DOUBLE SEALED BALL BEARINGS-GEN2180788>

DOUBLE SEALED BALL BEARINGS-GEN2180788>

STRAIGHT-ID SELF-ALIGN BALL BEARING-GUL22002RS >

STR-ID SELF-ALIGN BALL BEARINGS-GUL22012RS>

Key Specifications Type: Self-aligning double-row ball bearing Seals: 2RS1 (synthetic rubber contact seals on both sides) Dimensions: 15 mm (bore) x 35 mm (outer diameter) x 14 mm (width)Misalignment tolerance: Accommodates static and dynamic angular shaft misalignments

STRAIGHT-ID SELF-ALIGN BALL BEARING-GUL22042RS >

STRAIGHT-ID SELF-ALIGN BALL BEARING-NTN2205 >

STR-ID SELF ALIGN BALL BEARINGS-SNR2206>

Self-aligning ball bearings have two rows of balls, a common sphered raceway in the outer ring and two deep uninterrupted raceway grooves in the inner ring. They are insensitive to angular misalignment of the shaft relative to the housing, which can be caused, for example, by shaft deflection.
Accommodate static and dynamic misalignment
Excellent high-speed performance
Excellent light load performance
Low friction

STRAIGHT-ID SELF-ALIGN BALL BEARING-GUL22062RS >

STR-ID SELF ALIGN BALL BEARINGS-SNR2206EE>