BALL BEARINGS
9118-K Double Open Face Ball Bearing
DOUBLE OPEN FACE BALL BEARING - FAF9118K>
99-R-10 a premium single-row, double-sealed deep groove radial ball bearing designed for 5/8-inch fractional shafts
• Bore Diameter (Inner): 5/8 inch (0.6250")
• Outside Diameter (Outer): 1-3/8 inches (1.3750")
• Overall Width: 11/32 inch (0.3438")
• Enclosure Type: Double Sealed Contact Rubber (2RS / S7PP)
• Radial Static Load Capacity: 653 lbf
• Radial Dynamic Load Capacity: 1,260 lbf
• Max Speed Rating: ~23,000 RPM
• Row Configuration: Single Row Non-Fill Slot
99-R-14 a premium single-row, double-sealed deep groove radial ball bearing designed for 7/8-inch fractional shafts. Part of the "R" light inch series, this bearing is equipped with heavy-duty rubber contact seals on both sides to keep pre-packed factory
• Bore Diameter (Inner): 7/8 inch (0.8750")
• Outside Diameter (Outer): 1-7/8 inches (1.8750")
• Overall Width: 1/2 inch (0.5000")
• Enclosure Type: Double Sealed Rubber Contact (2RS / S9PP)
• Radial Static Load Capacity: 1,301 lbf
• Radial Dynamic Load Capacity: 2,266 lbf
• Max Speed Rating: Up to 16,000 RPM
• Row Configuration: Single Row Non-Fill Slot
99-R-16 a premium single-row, double-sealed deep groove radial ball bearing designed for 1-inch fractional shafts. Part of the "R" light inch series, this robust bearing features heavy-duty rubber contact seals on both sides to keep pre-packed factory gre
• Bore Diameter (Inner): 1.0000 inch (1")
• Outside Diameter (Outer): 2.0000 inches (2")
• Overall Width: 0.5000 inch (1/2")
• Enclosure Type: Double Sealed Contact Rubber (2RS / S10PP)
• Radial Static Load Capacity: 1,338 lbf
• Radial Dynamic Load Capacity: 2,259 lbf
• Max Speed Rating: ~15,000 RPM (Grease lubricated)
• Row Configuration: Single Row Non-Fill Slot
99-R-18 a premium single-row, double-sealed deep groove radial ball bearing engineered for 1-1/8 inch fractional shafts. Part of the "R" light inch series, this model is equipped with dual heavy-duty rubber contact seals to protect internal elements from
• Bore Diameter (Inner): 1-1/8 inches (1.1250")
• Outside Diameter (Outer): 2-1/8 inches (2.1250")
• Overall Width: 1/2 inch (0.5000")
• Enclosure Type: Double Sealed Rubber Contact (2RS / S11PP)
• Radial Static Load Capacity: 1,504 lbf
• Radial Dynamic Load Capacity: 2,394 lbf
• Max Speed Rating: ~14,000 RPM
• Construction: Standard Steel Cage with Single Row Non-Fill Slot
99-R-4 ) is a premium single-row, double-sealed deep groove radial ball bearing designed for fractional inch shafts. Part of the "R" light inch series, its integrated rubber seals keep contaminants like dirt and moisture out while locking lubrication in f
• Bore Diameter (Inner): 1/4 inch (0.2500")
• Outside Diameter (Outer): 5/8 inch (0.6250")
• Overall Width: 0.1960 inch (approx. 1/5")
• Enclosure Type: Double Sealed rubber closures
• Radial Static Load Capacity: 139 lbf
• Radial Dynamic Load Capacity: 333 lbf
• Max Speed Rating: Up to 52,000 RPM
• Cage Material: Steel
99-R-6 a premium single-row, double-sealed deep groove radial ball bearing designed to handle radial loads with minimal friction. Part of the "R" light inch series, it features an integrated rubber closure to protect internal steel components from dirt an
• Bore Diameter (Inner): 3/8 inch (0.3750")
• Outside Diameter (Outer): 7/8 inch (0.8750")
• Overall Width: 9/32 inch (0.2812")
• Enclosure Type: Double Sealed (2RS / S3PP)
• Radial Static Load Capacity: 317 lbf
• Radial Dynamic Load Capacity: 750 lbf
• Max Speed Rating: 18,000 to 36,000 RPM (depending on lubrication/load type)
• Internal Clearance: C3 (Standard loose radial play)
• Precision Rating: ABEC-1
99036 Double Shielded specialized needle roller and cage assembly bearing
DOUBLE SHIELDED BALL BEARINGS-GEN99036>
99038 Double Shielded ) is an industry-standard miniature single-row radial deep groove ball bearing. It is widely used in high-speed, compact applications ranging from electric motors and automotive components to consumer electronics.
DOUBLE SHIELDED BALL BEARING-GEN99038>
A-162536 1" Precision Linear Ball Bearing
1" PRECISION LINEAR BALL BEARING-GULA162536 >
AF-6464 1" X 2" Unground Flanged Radial Ball Bearing
These unground flanged ball bearings have very low precision tolerance levels. The are suitable for applications that do not require high precision movement
BK-1 CHICAGO RAWHIDE a classic front wheel spindle bearing and seal kit (also cataloged as a front locking hub service kit) designed for domestic 4WD trucks and SUVs.
BEARINGS-BEARINGS-CHIBK1>
BL-207-ZZ Max Load Two Shield Ball Bearing
MAX LOAD TWO SHIELD BALL BEARING - NTNBL207ZZ>
BLLP-6-19-J light-duty, self-aligning 2-bolt pillow block bearing unit. Unlike standard cast-iron pillow blocks, the BLLP series features a compact, low-profile design. The "J" suffix signifies a standardized metric mounting or housing configuration com
• Bore Diameter (Shaft Size): 1-3/16 inches (or 30 mm variant depending on application specs)
• Housing Type: 2-Bolt Pillow Block (Light-Duty Base Mount)
• Locking Mechanism: Eccentric Locking Collar or Set Screw (varies by sub-manufacturer configuration)
• Bolt Hole Center-to-Center (J): 120 mm (4.724 in)
• Centerline Height (H): 42.9 mm (1.689 in)
• Overall Length (L/H2): 83 mm
BPFL-1-8 a light-duty, narrow inner ring 2-bolt pressed steel flange ball bearing unit with a set-screw locking configuration. In standard imperial industrial nomenclature, the "1-8" suffix directly represents the bore diameter measured in sixteenths of a
AI Mode Conversation: GENERAL BEARING BPFL619
GENERAL BEARING BPFL619
The General Bearing BPFL619 (often stylized as BPFL 6-19) is a light-duty, pressed-steel 2-bolt flange ball bearing unit. This assembly features a set-screw locking mechanism and is commonly used in light industrial, agricultural, or conveyor applications where a lightweight, low-profile flanged mount is required.
Technical Specifications
• Bore Diameter (Shaft Size): 1-3/16 inches (1.1875 in)
• Housing Type: 2-Bolt Flange (Pressed Steel)
• Locking Mechanism: Set Screw
• Bolt Hole-to-Hole Distance: 3-9/16 inches (90.5 mm)
• Overall Housing Height/Width: 3-19/64 inches (84 mm)
• Bearing Insert Material: Chrome Steel / Roller Bearing Steel
Industry Interchanges & Part Numbers
If you are looking for drop-in replacements or cross-referencing catalogs from other major manufacturers, this unit matches the following industry part numbers:
• Asahi: BPFL 6-19 / KHPFL 206-19
• AMI Bearings: SBPFL206-19
• Peer / IPTCI: ASPFL 206-103
Are you looking to purchase a direct replacement, or do you need help verifying the load ratings and lubrication requirements for your specific machine setup?
Let's confirm it's in stock nearby
I'll check with nearby stores to make sure the item you need is available before you go
Check for me
Learn more
•
Maedler North America
Ball flange bearing BPFL 203 bore 17mm two-part steel sheet, zinc-plated PN: 62651700 – Maedler North America
Material: Two-part zinc-plated steel sheet housing, roller bearing steel. Base price $16.44 (quantity 1-4), scaling down to $12.41...
•
Scribd
Asahi 02 | PDF | Bearing (Mechanical) | Steel - Scribd
Flange 2-Bolt, Cast Iron. Steel, Wide Inner Ring, Spherical, BPFL 6-19 KHPFL 206-19 B6-19
•
ISB Industries
Self-aligning unit bearing support - ISB Industries
agricultural machinery; * gardening machinery; * fitness machines; * wood working machinery; * marble working machinery; * bottlin...
Show a
Recently Viewed
TAPER-ID SPHERICAL ROLLER BEARING-NSK22218K >
44 TOOTH 8-MM-PITCH TIMING BELT SHEAVES-BRWB448M20SDS >
10-MM X 1.00X45-MM HEX HEAD CAPSCREW-MET96110045UF >
9" X 4" COARSE RUBBER FLOAT TOOLS-JWH330555 >
CYLINDRICAL ROLLER BEARING-CHIM1307TV >
1615-1-9/16 1-9/16"-ID 1615-style Taper-lock Bushing
1-9/16"-ID 1615-STYLE TAPER-LOCK BUSHING - IDC161519/16>
