BLLP-6-19-J GENERAL BEARING
BEARING-GENBLLP619J>
Recently Viewed
BEARING-GENBLLP619J>
Gates® Power Transmission PowerGrip® HTD® P24-5M-15AL Sprocket, 1/4 to 11/16 in Rough Stock Bore, 1.459 in OD, 24 Grooves, 1.504 in Dia Pitch, 0.547 in W Face
PowerGrip Sprockets and Pulleys provide optimum performance for all constructions of PowerGrip GT, PowerGrip HTD and PowerGrip Timing belts, delivering maximum performance and superior reliability. PowerGrip sprockets are precision manufactured and static balanced to eliminate sprocket wobble.
B&K® 104-405 ProLine™ Heavy Duty Sillcock, 1/2 in Nominal, MNPT End Style, Brass Body, Handwheel Actuator
ProLine Series Frost Free Sillcocks offer an excellent alternative to standard hose bibbs in areas where freezing happens regularly through the year. When installed properly in basements or crawl spaces, the valve is angled down slightly to ensure water drains properly when shutoff so when freezing weather sets in, no water is present to cause bursting.
Power Team® P300 2-Speed Single Acting Hand Pump, 1.5 gal Tank, 310 cu-in Pump
Power Team® hand pumps, with the angled fill port, have a built in "relief valve" protection system. This system is designed to protect over pressurization of the reservoir from sudden back pressure. This system also works as a seal to prevent oil leaks.
ASP-2432-S Industry Standard Clamping Collar, 2-Piece Construction, 2-7/16 in ID x 3-1/2 in OD x 3/4 in W, Steel
Black Oxide Plated Steel Two-Piece Clamping Collar. Design fully engages the shaft without marring. Easily installed where major disassembly would otherwise be required. Greater axial holding power than set screw or one-piece clamping collars. Effective on hard & soft shafts.
Dixon® T73E-2 Series 1 3-Way Shut-Off Valve, For Use With 72 and 73 Filters/Regulators/Lubricators, 1/4 in, 250 psi, Import
Dixon® T73E-2 Series 1 3-Way Shut-Off Valve, For Use With 72 and 73 Filters/Regulators/Lubricators, 1/4 in, 250 psi, Import
