BALL BEARINGS
DOUBLE SHIELDED BALL BEARINGS-FAF305KDD>
DOUBLE SHIELDED BALL BEARINGS-FAF305KDD>
DOUBLE OPEN FACE BALL BEARINGS-FAF304W>
SINGLE SHIELDED BALL BEARING-FAF304KD>
DOUBLE OPEN FACE BALL BEARINGS-FAF304K>
DOUBLE SEALED BALL BEARINGS-FAF303PP>
DOUBLE SHIELDED BALL BEARINGS-BCA302SS>
DOUBLE SHIELDED BALL BEARINGS-FAF301KDD>
3/8" STEEL BALLS-SSB38 >
3/4" STEEL BALLS-SSB34 >
3/16" STEEL BALLS-SSB316 >
PRECISION THRUST BALL BEARINGS-FAF3MM314WISUL>
PRECISION THRUST BALL BEARINGS-FAF3MM205WICR>
PAIR PRECISION THRUST BALL BEARING-FAF3MM205WIDUL>
The New Departure 3L15 is a vintage, single-row deep groove ball bearing. It serves as a direct cross-reference to the industry-standard 6015 bearing. Dimensional Specifications Bore (Inner Diameter): 75 mm Outer Diameter: 115 mm Width: 20 mm
THRUST BALL BEARING - GUL2907>
24121-88 Radial/Deep Groove Ball Bearing - Straight Bore, 1.3125 in ID, 2.5625 in OD, 0.6875 in Width, Double Sealed, Without Snap Ring
DOUBLE SEALED BALL BEARINGS-GEN2412188>
24120-77Radial/Deep Groove Ball Bearing - Straight Bore, 1.2500 in ID, 2.5625 in OD, 0.6875 in Width, Double Shielded, Without Snap Ring
DOUBLE SHIELDED BALL BEARINGS-GEN2412077>
• Bore Diameter (ID): 1.0000 inch
• Outside Diameter (OD): 2.0000 inches
• Width: 0.5625 inches (9/16 in)
• Bore Type: Straight
• Closure Type: Double Sealed (rubber seals on both sides to retain grease and keep out contaminants)
• Cage Material: Steel
• Maximum Speed: 5,000 RPM
• Bore Diameter (ID): 0.8750 inches (7/8 in)
• Outside Diameter (OD): 2.0000 inches (2 in)
• Width: 0.5625 inches (9/16 in)
• Bore Type: Straight
• Closure Type: Double Shielded (denoted by the "-77" suffix, utilizing two metal shields to block larger dust particles while retaining factory grease)
23212-88 Radial/Deep Groove Ball Bearing - Straight Bore, 0.7500 in ID, 2.0000 in OD, 0.5625 in Width, Double Sealed, Without Snap Ring
DOUBLE SEALED BALL BEARINGS-GEN2321288>
23212-77Radial/Deep Groove Ball Bearing - Straight Bore, 0.7500 in ID, 2.0000 in OD, 0.5625 in Width, Double Shielded, Without Snap Ring
DOUBLE SHIELDED BALL BEARINGS-GEN2321277>
TPR-ID SELF-ALIGNING BALL BEARING-GUL2311K >
STR-ID SELF ALIGNING BALL BEARINGS-SNR2310EE>
Recently Viewed
Browning® 1123264 Single Strand Minimum Bore Type B Roller Chain Sprocket With Hardened Teeth, 3/4 in Dia Bore, 7.59 in OD, #60 Chain, 30 Teeth, Steel
Browning®Type B minimum bore sprockets are offered in single, double and triple strands. Offerings include 25 to 200 pitch range. Minimum bore sprockets are available in bore ranges from 1/4 to 8-3/8 in.
Proto® TorquePlus™ J1219MES Combination Wrench, 19 mm Wrench, 12 Points, 15 deg Offset, 5-7/16 in OAL, Alloy Steel, Full Polished, ASME B107.100-2010
Edison MEQ3.2 Time Delay Midget Fuse, 3.2 A, 500 VAC, 10 kA Interrupt
2-GROOVE 1-1/8"-ID A-BELT SHEAVES IDC 2-AK-051-1-1/8
2-GROOVE 1-1/8"-ID A-BELT SHEAVE
Drillco 31E045BB 3100E Adjustable Round Split Die, M4.5x0.75 Thread, 1 in OD Die, HSS
The round split adjustable die may be adjusted through the screws on the holder. Adjustment on the open type is done by turning the three screws on the holder. A die holder or handle is needed for proper operation of round split adjustable dies.
533556 DO-IT-BEST/HALO 180 DEGREE 70' RANGE BRONZE INCANDESCENT LAMP MOTION SENSOR
DETECTS MOTION UP TO 70' AWAY. LIGHTS CAN BE MANUALLY OPERATED (OVERRIDE MODE) FROM AN INSIDE LIGHT SWITCH. INTEGRAL PHOTOCELL DESIGN PREVENTS LIGHTS FROM TURNING ON DURING DAYLIGHT.
-JWH533556 >
