BALL BEARINGS

DOUBLE SHIELDED BALL BEARINGS-GEN2110377>

DOUBLE OPEN FACE BALL BEARINGS-GEN2110101>

Bore Diameter: 55 mm Outside Diameter: 100 mm Width: 21 mm Max RPM (Grease): 5200 rpm Max RPM (Oil): 6300 rpm Radial Dynamic Load: 48,400 N (10,900 lb.) Radial Static Load: 44,000 N (9890 lb.)

Inner Diameter (ID): 60 mm (2.36 inches) Outer Diameter (OD): 110 mm (4.33 inches) Width: 22 mm (0.87 inches) Load Rating: Basic dynamic load rating of 56.1 kN and basic static load rating of 42.5 kN Limiting Speed: Up to 6000 rpm (oil) or 6700 rpm Design: Utilizes filling slots to accommodate higher radial loads than standard deep groove bearings

DOUBLE SHIELDED BALL BEARINGS-FAF211KDD>

DOUBLE OPEN FACE BALL BEARINGS

DOUBLE OPEN FACE BALL BEARINGS-FAF210W>

Bore Diameter (ID): 45 mm Outside Diameter (OD): 85 mm Overall Width: 19 mm Closure Type: Double Shielded (Metal shields on both sides Internal Clearance: C3 (greater than normal radial internal clearance) Max Speed: Up to 9,000 RPM Material: High-quality bearing steel

DOUBLE SEALED BALL BEARING-FAF209PP>

he MRC 209MF is a single-row deep groove radial ball bearing with filling slots (a "max type" bearing). It features a 45 mm inner diameter, 85 mm outer diameter, and 19 mm width, and includes a single shield. It accommodates higher radial loads than standard bearings but cannot handle significant thrust loads.

SINGLE SHIELDED BALL BEARINGS-FAF209KD>

MAXIMUM CAPACITY SHIELDED BEARING-NSK208ZZ >

MAXLOAD DOUBLE SHIELDED BALL BEARING - FAF208WDD>

The MRC 208SFF is a heavy-duty, single-row deep groove radial ball bearing manufactured by MRC (a brand under SKF). It features a straight bore and a double-shielded closure ("FF" suffix), making it highly effective at retaining grease while keeping out dust and contaminants. Key Technical Specifications Bore Diameter (Inner ID): 40 mm Outside Diameter (OD): 80 mm Width: 18 mm Enclosure Type: Double Shielded (Metal shields on both sides) Dynamic Load Capacity: 6,900 lb. Static Load Capacity: 4,270 lb. Maximum Speed: 10,000 RPMInterchange Equivalents: Cross-references directly with standard industry part number 6208-2Z (or 6208-ZZ).

Cylindrical Bore Deep Groove Ball Bearing
Item #100760654
Deep Groove Bearing
1.57 in Inner Diameter
3.15 in Outer Diameter
1.19 in Width
Bearing Steel Material

The MRC 208CFF is a single-row deep groove type ball bearing featuring two metal shields. Manufactured under the MRC brand (by SKF), this specific configuration is equivalent to a standard 6208-2Z or 6208ZZ bearing. Key Specifications Bore Diameter (Inner): 40 mm Outside Diameter: 80 mm Width: 18 mm Closure Type: Double Shielded (indicated by the FF suffix).

MAXIMUM CAPACITY SHIELDED BEARING-NSK207ZZ >

MAX-TYPE LOAD BALL BEARINGS-FAF207W>

DOUBLE SEALED BALL BEARINGS-FAF207PP>

DOUBLE OPEN MAX LOAD BALL BEARINGS-SKF207>

MAX LOAD CAPACITY BALL BEARINGS-FAF206W>

DOUBLE SEALED BALL BEARINGS-FAF206PP>

DOUBLE SEALED BALL BEARING-FAF206PP>

Bore Diameter (ID): 30 mm (1.1811 inches) Outside Diameter (OD): 62 mm (2.4409 inches) Width: 16 mm (0.6299 inches) Bearing Type: Radial filling-notch max-capacity ball bearing Bore Type: Straight Application Warning: Due to the filling slot design, this bearing is highly optimized for predominant radial loads and should not be used in pure thrust (axial)