BALL BEARINGS
5204-2-RS Double Row Sealed Ball Bearing
DOUBLE ROW SEALED BALL BEARING-GUL52042RS >
5204 vintage double-row metric angular contact ball bearing
The New Departure 5204 is a double-row angular contact ball bearing. It is widely used in heavy-duty machinery, automotive applications, and industrial equipment to handle combined (radial and axial) loads.
5203-ZZ Double Row Shielded Ball Bearing
DOUBLE ROW SHIELDED BALL BEARINGS-SNR5203ZZ>
5203-2-Z Double Row Shielded Ball Bearing
DOUBLE ROW SHIELDED BALL BEARING-GUL52032Z >
5203-2-RS Double Row Sealed Ball Bearing
DOUBLE ROW SEALED BALL BEARING-GUL52032RS >
5202-SBKF Double Row One Shield Ball Bearing belongs to the 5200-SB Light Series. Unlike the "M" series variants that utilize an aggressive filling notch for raw radial capacity, the Conrad-style non-filling slot layout of this bearing allows it to handl
• Bore Diameter (Inner ID): 15 mm
• Outside Diameter (Outer OD): 35 mm
• Overall Width: 15.875 mm (0.6250 in)
• Contact Angle: 30°
• Enclosure Style: Typically open or equipped with a single metal shield depending on exact sub-production batches
• Limiting Speed: 12,000 RPM (Grease) / 17,000 RPM (Oil)
• Dynamic Radial Load Capacity: 2,560 lbf (11,400 N)
• Static Radial Load Capacity: 1,530 lbf (6,800 N)
5202-A-TN-9 Double Row Open Face Bearing
The SKF 5202ATN9 is a double-row angular contact ball bearing featuring a 15 mm bore, a 35 mm outer diameter, and a 15.9 mm width. It is designed with a non-metallic snap cage (TN9) and open configuration to support heavy radial and axial loads in both directions
5202-A-2-Z Double Row Shielded Ball Bearing
DOUBLE ROW SHIELDED BALL BEARING-GUL5202A2Z >
5201-SBK-FF Double Row Ball Bearing It belongs to the 5200-SB Light Series and is designed with a Conrad (non-filling slot) construction. This configuration features a 30° contact angle across its two rows of balls, converging outside the assembly to sig
The MRC 5201SBKFF is a double-row angular contact ball bearing. Designed for high heavy-duty precision, it is widely utilized in mechanical power transmission and industrial motion control applications. Key Specifications Bore Diameter: 12 mm Outside Diameter (OD): 32 mm Width: 15.88 mm (0.625 inches) Contact Angle: 30 degrees
5201-2-Z Double Row Shielded Ball Bearing
DOUBLE ROW SHIELDED BALL BEARING-GUL52012Z >
5201-2-RS Double Row Sealed Ball Bearing
DOUBLE ROW SEALED BALL BEARING-GUL52012RS >
5200-SBK-FF MRC BEARINGS Ball Bearing It belongs to the 5200-SB Light Series and is constructed using a Conrad (non-filling slot) layout. Featuring back-to-back contact angles that converge outside the unit, it delivers high operational rigidity and excel
Double Row Angular Contact Bearing - 10 mm Bore, 30 mm OD, 0.5625 in Width, Double Shielded, Without Snap Ring, 30 ° Contact Angle
5200-SBK-F MRC BEARING Ball Bearing It belongs to the 5200-SB Light Series and is constructed using a Conrad (non-filling slot) layout. This design handles heavy radial forces alongside high, equal bi-directional thrust loads.
MRC 5200SBKF double row angular contact ball bearing with 10mm bore and 1.181" O.D. Single shielded enclosure and metal cage. Suitable for radial and axial load applications. Drop-in SKF replacement for industrial machinery.
5200-2-Z Double Row Shielded Ball Bearing
DOUBLE ROW SHIELDED BALL BEARING-GUL52002Z >
5200-2-RS Double Row Sealed Ball Bearing
DOUBLE ROW SEALED BALL BEARING-GUL52002RS >
Recently Viewed
1.000" X 2.000" X .250" OIL SEAL SINGLE LIP SHAFT SEAL WITH SPRING
CHI10123 >
ELECTRICAL WIRE STRIPPER & CRIMPER - GRW2162>
VARIABLE SPEED BELT OUTSIDE CIRCUMFERENCE >65."-JAS4630V650 >
OIL SEALS-1.850" X 2.559" X .394"-CHI18467>
Browning 20-TOOTH P-BUSH #60 CHAIN SPROCKET BRW H-60-P-20
Browning® offers a variety of bushing type sprockets available in single and double strands. Offerings include 35 to 160 pitch range. Bushed type bore ranges are available from 1/2 to 5 in. Hardened teeth are available up to 30 teeth.
The round split adjustable die may be adjusted through the screws on the holder. Adjustment on the open type is done by turning the three screws on the holder. A die holder or handle is needed for proper operation of round split adjustable dies.
