Browning 20-TOOTH P-BUSH #60 CHAIN SPROCKET BRW H-60-P-20
Browning® offers a variety of bushing type sprockets available in single and double strands. Offerings include 35 to 160 pitch range. Bushed type bore ranges are available from 1/2 to 5 in. Hardened teeth are available up to 30 teeth.
-
BrandBrowning®
-
UPC662289205783
-
Manufacturer Part Number1177955
-
CountryUSA
-
Pitch Diameter4.794 in
-
MaterialSteel
-
Chain Size#60
-
TypeSingle Strand Split Taper Bushed Type 4
-
Hub Diameter3 in
-
Number of Teeth20
-
Outside Diameter5.185 in
-
Length Through Bore2.1406 in
-
Bore Diameter1/2 in
- This product has the Browning® exclusive twice the life guarantee
- Easy installation and removal
- Hardened teeth at no extra cost, drives sizes up to 30 teeth on 35 through 160 chain
- External key higher torque capacity, aligns bolt holes
- Provides key-to-key drive
- Double split barrel improved clamping
- Solid flange true concentricity
- Longer barrel better support on the shaft
- For use with 3/4 in pitch ANSI chain
- Split Taper Bushing are available in popular Inch, Metric and Spline bore
-
Alternative Part NumberH60P20
-
UNSPSC31171901
-
Package DescriptionEACH
-
Warranty1 Year
-
Specification Sheet
-
Warranty Information
Recently Viewed
Browning 20-TOOTH P-BUSH #60 CHAIN SPROCKET BRW H-60-P-20
Browning® offers a variety of bushing type sprockets available in single and double strands. Offerings include 35 to 160 pitch range. Bushed type bore ranges are available from 1/2 to 5 in. Hardened teeth are available up to 30 teeth.
Gates® Power Transmission PowerGrip® HTD® 695-5M-25 Synchronous Belt, 25 mm W, 695 mm OAL, 5 mm Pitch, 139 Teeth, Neoprene
PowerGrip™ HTD belts have a larger, more robust tooth profile for increased capacity, as compared to timing belts. 3M and 5M belts are suitable for domestic appliances, office machines, electric hand tools and for applications in the processing and chemical industry. 8M, 14M and 20M belts are used in high-performance drives in the machine tool, paper and textile industries where durability and low maintenance are required.
Crescent® CSBMM-748 SteelSlicer Medium Metal Circular Saw Blade, 7-1/4 in Dia, 5/8 in Arbor, Steel Blade, 48 Teeth
Crescent's SteelSlicer™ Metal Blades deliver quality cutting performance for tough demands on the jobsite. Premium Heat Defense™ cermet teeth slice through metal with ease delivering 20X life for maximum productivity. A thin kerf design provides less burring, while Active Shield™ non-stick blade coating protects against heat, gumming and corrosion delivering 40% cooler cuts for less downtime. Laser cut vibration and expansion slots create a more balanced blade for greater durability and finish.
Browning® 3749538 Taper Lock Bushing, 15/16 in Dia Bore, 3-3/8 in Dia Barrel, 1-3/4 in OAL, Steel
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing, and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction. Depending on your preference, these bearings are available in both inch and metric shaft sizes with a wide variety of cast iron, stamped steel or rubber mount housings, sealing, and lubrication options or industry specific solutions.
GLAZIER POINTS HOLD GLASS IN SASH OR WOODEN FRAMES AND CAN BE INSERTED WITH A PUTTY KNIFE. THE UNIQUE BONDING PROCESS OF GLAZIER POINTS ELEMINATES POINT DRIVER JAMMING DUE TO WAX BUILD-UP. THE WAX-FREE POINTS PROVIDE BETTER HOLDING POWER FOR PICTURE FRAMING AND GLAZING. GLAZIER POINTS EASILY PUSH INTO PLACE.
-JWH719066 >
