BANJO FITTINGS & ACCESSORIES
RN-125-075 BANJO 1¼" X ¾" Poly Reducing Nipple
Excellent chemical resistance.
Glass reinforced polypropylene.
Heavy duty (Schedule 80).
Lightweight with excellent strength.
NPT threads.
Maximum operating pressure 300 psi
RN-200-125 BANJO 2" X 1¼" Poly Reducing Nipple
Excellent chemical resistance.
Glass reinforced polypropylene.
Heavy duty (Schedule 80).
Lightweight with excellent strength.
NPT threads.
Maximum operating pressure 300 psi
RS-21 BANJO Rectorseal® No. 21 (8 Oz With Brush In Cap
Slow drying, soft set multi-purpose sealant designed for use where black is preferred. 8 oz can with brush in the cap. Conforms to TT-S-1732.
Recommended procedure for sealing pipe threads: We DO NOT recommend using pipe tape. Pipe tape enlarges the outside diameter of the male thread and may cause the female thread to split. We recommend using a pipe thread sealant. Use on clean tapered threads. Apply a thick even coat on male threads using brush applicator. For pipe diameters smaller than 1¼" apply to male threads only. For 1¼" and larger sizes apply to both male and female threads. Avoid applying excessive amounts. Hand tightens joints and then torque another ½ to ¾ turn until threads seal.
SL-025-90 BANJO Street Elbow .25 Inch 90 Degree Street Elbow
Excellent chemical resistance.
Glass reinforced polypropylene.
Heavy duty (Schedule 80).
Lightweight with excellent strength.
NPTthreads.
Pressure to 150 P.S.I. at 70°F.
SL-075-45 BANJO ¾" 45° Poly Street Elbow
Excellent chemical resistance.
Glass reinforced polypropylene.
Heavy duty (Schedule 80).
Lightweight with excellent strength.
NPT threads.
Maximum operating pressure 300 psi
SL-150-45 BANJO 1½" 45° Poly Street Elbow
1-1/2" 45-D POLY STREET ELBOW
SL-300-45 BANJO 3" 45 Degree Poly Street Elbow
Excellent chemical resistance.
Glass reinforced polypropylene.
Heavy duty (Schedule 80).
Lightweight with excellent strength.
NPT threads.
Maximum operating pressure 300 psi
SW-100 BANJO 1" Male NPT (MPT) x 1" Female NPT Swivel (FPS)
Connection Size: 1" Male NPT (MPT) x 1" Female NPT Swivel (FPS)Material: Glass-reinforced polypropylene (Schedule 80 thickness) Max Pressure Rating: 150 PSI at 70°F (Up to 300 PSI dynamic rating depending on system components) Chemical Resistance: High compatibility with fertilizers, corrosive fluids, and agricultural chemicals Weight: 0.17 lbs.
TC-438 BANJO 4" T-Bolt Hose Clamp
3 spot welds for extra strength.
360° sealing surface.
Ideal for high torque applications.
Nylon lock nut feature.
Stainless steel bolt with silver plated nut to prevent seizing.
Stainless steel construction.
Str N, Positive connections where ordinary hose clamps fail.
T-bolt design.
TC-612 BANJO T-Bolt Hose Clamp / Super Clamp
Hose Nominal Size: 1 inch Clamping Range Dimension: 1.20" minimum diameter x 1.34" maximum diameter x 0.75" band width Primary Application: Securing high-pressure agricultural, chemical, and fluid-handling hoses to hose barb fittings to prevent leaks or blowouts.
TEE-200 BANJO 2" Poly Tee
Excellent chemical resistance.
Glass reinforced polypropylene.
Heavy duty (Schedule 80).
Lightweight with excellent strength.
NPT threads.
Maximum operating pressure 300 psi
TF-153 BANJO 1½" Poly Tank Flange Nut
Tank Nut, 1-1/2 Inch And 2 Inch, Polypropylene
UVA-100-FP BANJO 1" Full Port Single Union Valve
Double O-rings in stem area for extra sealing protection.
EPDM O-rings to handle most fertilizers and many chemicals.
Interlocking body and end plate to allow easy thread connection when installing valves.
Maximum operating pressure 300 P.S.I. at 70°:F.
Precision molded in glass reinforced polypropylene, for strength and chemical resistance.
PTFE seats for smooth operation and proper sealing characteristics.
V-050 BANJO ½" Full Port Valve
Ball is diamond turned, after molding, to make it spherically perfect, which provides precise contact between ball and seats.
FKM seals.
Precision molded polypropylene is reinforced with fiberglass for additional strength.
PTFE self-lubricating stem bushÂ:ings and seats cannot stick or bind.
Self-aligning ball moves freely against the PTFE seats for smooth operation. The valve opens and closes with very little pressure onthe handle.
Stainless steel bolts.
Maximum 300 PSI
V-07200 BANJO alve Repair Kit, 1/2, 3/4 And 1 Inch Standard Port
V-050/V-075/V-100 BALL VALVE KITS
Recently Viewed
3"X2" 90-DEG. HB ELBOW MANIFOLD-BAJM300220BRB90 >
T-LINE STRAINER, 150 DEGREES F, 1 IN BANJO MLST MAINFOLD LINE STRAINERS, 3/4" TO 1-1/2" BANJO LST T STRAINERS. 1" PIPE SIZE
-BAJLST100B >
GLASS REINFORCED POLYPROPYLENE, HEAVY DUTY (SCHEDULE 80) LIGHTWEIGHT WITH EXCELLENT STRENGTH, NPT THREADS, EXCELLENT CHEMICAL RESISTANCE
1-1/2" - 2" 30-MESH SCREEN FOR Y-STRAINER
2" STANDARD PORT VALVE, FNPT X FNPT, IS ENGINEERED FOR RELIABLE FLUID CONTROL IN VARIOUS INDUSTRIAL APPLICATIONS. THE 4-BOLT DESIGN FEATURING 304 STAINLESS STEEL BOLTS AND NUTS ENSURES SECURE AND STABLE INSTALLATION. EQUIPPED WITH FKM SEALS, THIS VALVE OFFERS OPTIMAL CHEMICAL RESISTANCE AND LONGEVITY. SELF-ALIGNING BALL. SELF LUBRICATING STEM BUSHINGS AND SEATS PREVENT STICKING OR BINDING.
BAJV200 >
DM-200-D BANJO 2" Poly Dry-Mate Female X FPT NPT With FKM Seals
Easy to use.
Economical.
Lightweight.
Maximum operating pressure 100 psi
Minimal fluid spillage.
Reduces risk of exposure.
SpillageData: 2" &mdash: 2.6 ML
Unrestricted 1½" flow.
Wide range of chemical resistance.
FKM seals.
When properly installed and operated, the assembly will not accidentally separate while fluid is flowing preventing costly mishaps.
