BANJO FITTINGS & ACCESSORIES
STEM FOR VA-200-FP VALVE
2" X 8" NOZZLE PIPE
REPAIR KIT FOR V200FP VALVE-BAJV25200 >
ANGLE END FLANGE FOR VA200FP VALVE
VALVE BODY O-RING FOR 2″ FULL PORT
Ball is diamond turned, after molding, to make it spherically perfect, which provides precise contact between ball and seats.
FKM seals.
Polypropylene is reinforced with fiberglass for additional strength.
Precision molded in polypropylene.
PTFE self-lubricating stem bushÂ:ings and seats cannot stick or bind.
Self-aligning ball moves freely against the PTFE seats for smoothoperation.
Stainless steel bolts.
valve opens and closes with very little pressure on the handle.
Maximum operating pressure 200 psi.
3 in. Standard Port Valve Repair Kit
V-35200 BANJO Replacement Part for 6 Bolt Ball Valves | 3" Full Port Valve | Repair Kit
Applications:
Fluids
Replacement part for use on select Banjo Valves
Repair Kits Contain the following
1 Ball
2 Ball Seats
2 Body O-Rings
1 Upper Stem Bushing
1 Thrust Washer
1 Stem O-Ring
QTY PART NO DESCRIPTION
1 V25060 VALVE STEM THRUST BEARING
1 V25160 Stem Bushing
1 V25163 #214 FKM O'RING
1 V40255 4" VALVE BALL, TUMBLED
2 V40264 4" ENDPLATE, MACHINED
2 V40265 AS568A - 259 O-RING, FKM, BLACK
45-DEG ELBOW NOZZLE VALVES-BAJVA100 >
All stainless bolts.
Angled end flange with 8" long polypropylene fill spout.
Lightweight hose end valve for convenient transfer of liquids into drums, tanks, etc.
Maximum operating pressure 225 PSI
Recently Viewed
Dodge® 023001 103 Type E-Xtra Pillow Block Roller Bearing Unit, 1-1/4 in Dia Bore, 4.75 to 4.81 in L Bolt Center-to-Center, 1-1/2 in Base to Bore Centerline, 6 in OAL x 3 in OAH
Dodge® 023001 103 Type E-Xtra Pillow Block Roller Bearing Unit, 1-1/4 in Dia Bore, 4.75 to 4.81 in L Bolt Center-to-Center, 1-1/2 in Base to Bore Centerline, 6 in OAL x 3 in OAH
BLACK CORD, 100% NYLON, ULTRA THIN DESIGN IS LIGHT & COMFORTABLE, IDEAL FOR USE ON MOST SPECTACLES-GSI400 >
MORSE® 59742 5970 General Purpose Premium Carbide Burr, Oval Head, 1/2 in Dia Head, 7/8 in L of Cut, 2-5/8 in OAL, Single Cut
MORSE® 59742 5970 General Purpose Premium Carbide Burr, Oval Head, 1/2 in Dia Head, 7/8 in L of Cut, 2-5/8 in OAL, Single Cut
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
HCI Preferred Supplier 46051 Needle Valve, 1/4 in, MIP, Brass Body
3/8" COPPER SWEAT TEES-ELK1113/8>
