BANJO FITTINGS & ACCESSORIES
3"X2" 90-DEG. HB ELBOW MANIFOLD-BAJM300220BRB90 >
Easy On/Off hose connections.
Positive seals.
Quick &: easy assembly.
Maximum operating pressure 225 PSI.
3" X 3" FLANGE HB TEE MANIFOLD-BAJM300300HBT >
3-inch heavy-duty plumbing fitting widely used in agricultural spraying, fluid transfer, and industrial chemical handling. Manufactured by Banjo Corporation, this 90-degree elbow connects a standard 3-inch manifold flange to a 3-inch hose barb connection.
3" FLANGED MANIFOLD CROSS - BAJM300CR>
3" X 3"FEMALE PIPE THREAD MANIFOLD-BAJM300MPT >
3" X 3" MALE PIPE THREAD MANIFOLD-BAJM300MPT >
3" FLANGE MANIFOLD PLUG-BAJM300PLG >
Easy On/Off hose connections.
Positive seals.
Quick &: easy assembly.
Maximum operating pressure 300 PSI.
2" FLANGED Y-STRAINER CAP
MLS-222-80 BANJO 2" Full Port Manifold Y Strainer With 80 Mesh Screen
225 psi maximum.
316 stainless steel screens.
EPDM gaskets.
Strain your sprayer lines with the BANJO 200 STANDARD FLANGE T- STRAINER - LESS SCREEN replacement part. Designed with a poly body to keep your sprayer clean from tank debris and other obstructions to keep a consistent flow.
1"-MPT X 1/2"-BARB NYLON TEES-GL-MT1012>
1"-MPT X 3/4"-BARB NYLON TEES-GL-MT1034>
1"-MPT X 3/8"-BARB NYLON TEES-GLMT1038>
1/2"-MPT X 3/4"-BARB NYLON TEES-GL-MT1234>
3/4"-MPT X 1/2"-BARB NYLON TEES-GLMT3412>
3/4"-MPT X 3/4"-BARB NYLON TEES-GL-MT3434>
3/4"-MPT X 3/8"-BARB NYLON TEES-GL-MT3438>
Glass reinforced polypropylene
EDPM gaskets
Manifold gasket not included
Glass reinforced polypropylene
EDPM gaskets
Manifold gasket not included
Family: Manifold Flange Connections
Type: Tank-Fitting
Style: Bottom Drain
Size: 3"
Weight 2.131 lbs.
Excellent chemical resistance.
Glass reinforced polypropylene.
Heavy duty (Schedule 80).
Lightweight with excellent strength.
NPTthreads.
Maximum operating pressure 300 psi
Excellent chemical resistance.
Glass reinforced polypropylene.
Heavy duty (Schedule 80).
Lightweight with excellent strength.
NPTthreads.
Maximum operating pressure 300 psi
Recently Viewed
2" X 4.25" SHADED WELDING LENS-FOR57005 >
5/16"-OD REFRIG/COPPER TUBE-JWH416687>
MORSE® 12044 1330L General Purpose Jobber Length Drill Bit, 15/64 in Drill - Fraction, 0.2344 in Drill - Decimal Inch, 118 deg Point, HSS, Bright
MORSE® 12044 1330L General Purpose Jobber Length Drill Bit, 15/64 in Drill - Fraction, 0.2344 in Drill - Decimal Inch, 118 deg Point, HSS, Bright
ASP-502-S Industry Standard Clamping Collar, 2-Piece Construction, 1/2 in ID x 1-1/8 in OD x 13/32 in W, Steel
Black Oxide Plated Steel Two-Piece Clamping Collar. Design fully engages the shaft without marring. Easily installed where major disassembly would otherwise be required. Greater axial holding power than set screw or one-piece clamping collars. Effective on hard & soft shafts.
CRC® 03096 Chlorinated Heavy Duty Non-Flammable Degreaser, 1 gal Bottle, Moderate Odor/Scent, Clear, Liquid Form
CRC® 03096 Chlorinated Heavy Duty Non-Flammable Degreaser, 1 gal Bottle, Moderate Odor/Scent, Clear, Liquid Form
THRUST BALL BEARINGS-INA51109J>
