BANJO FITTINGS & ACCESSORIES

Excellent chemical resistance.
Glass reinforced polypropylene.
Heavy duty (Schedule 80).
Lightweight with excellent strength.
NPT threads.
Maximum operating pressure 300 psi

Excellent chemical resistance.
Glass reinforced polypropylene.
Heavy duty (Schedule 80).
Lightweight with excellent strength.
NPT threads.
Maximum operating pressure 300 psi

Slow drying, soft set multi-purpose sealant designed for use where black is preferred. 8 oz can with brush in the cap. Conforms to TT-S-1732.
Recommended procedure for sealing pipe threads: We DO NOT recommend using pipe tape. Pipe tape enlarges the outside diameter of the male thread and may cause the female thread to split. We recommend using a pipe thread sealant. Use on clean tapered threads. Apply a thick even coat on male threads using brush applicator. For pipe diameters smaller than 1¼" apply to male threads only. For 1¼" and larger sizes apply to both male and female threads. Avoid applying excessive amounts. Hand tightens joints and then torque another ½ to ¾ turn until threads seal.

Excellent chemical resistance.
Glass reinforced polypropylene.
Heavy duty (Schedule 80).
Lightweight with excellent strength.
NPTthreads.
Pressure to 150 P.S.I. at 70°F.

Excellent chemical resistance.
Glass reinforced polypropylene.
Heavy duty (Schedule 80).
Lightweight with excellent strength.
NPT threads.
Maximum operating pressure 300 psi

1-1/2" 45-D POLY STREET ELBOW

Excellent chemical resistance.
Glass reinforced polypropylene.
Heavy duty (Schedule 80).
Lightweight with excellent strength.
NPT threads.
Maximum operating pressure 300 psi

Connection Size: 1" Male NPT (MPT) x 1" Female NPT Swivel (FPS)Material: Glass-reinforced polypropylene (Schedule 80 thickness) Max Pressure Rating: 150 PSI at 70°F (Up to 300 PSI dynamic rating depending on system components) Chemical Resistance: High compatibility with fertilizers, corrosive fluids, and agricultural chemicals Weight: 0.17 lbs.

1/2" X 1/2" X 1/2" NYLON BARB TEES-GL-T12>

3 spot welds for extra strength.
360° sealing surface.
Ideal for high torque applications.
Nylon lock nut feature.
Stainless steel bolt with silver plated nut to prevent seizing.
Stainless steel construction.
Str N, Positive connections where ordinary hose clamps fail.
T-bolt design.

Hose Nominal Size: 1 inch Clamping Range Dimension: 1.20" minimum diameter x 1.34" maximum diameter x 0.75" band width Primary Application: Securing high-pressure agricultural, chemical, and fluid-handling hoses to hose barb fittings to prevent leaks or blowouts.

Excellent chemical resistance.
Glass reinforced polypropylene.
Heavy duty (Schedule 80).
Lightweight with excellent strength.
NPT threads.
Maximum operating pressure 300 psi

1/2"-FPT POLY BULKHEAD FITTINGS-GL-TF12PB>

Tank Nut, 1-1/2 Inch And 2 Inch, Polypropylene

8-STATION POLY MANIFOLDS-BAJTM075050>

100-SERIES MOUNTING U-BOLTS-BAJUB100 >

200-SERIES MOUNTING U-BOLTS-BAJUB202 >

220-SERIES MOUNTING U-BOLTS-BAJUB220 >

1/2"-3/4" STRAINER FKM O-RINGS-BAJUV10264V >

O-RING FOR 3/4"X 1" CLEAN OUT PLUG-BAJUV15163 >

2" FDA UNION VALVES-BAJUV204FPFD >

Double O-rings in stem area for extra sealing protection.
EPDM O-rings to handle most fertilizers and many chemicals.
Interlocking body and end plate to allow easy thread connection when installing valves.
Maximum operating pressure 300 P.S.I. at 70°:F.
Precision molded in glass reinforced polypropylene, for strength and chemical resistance.
PTFE seats for smooth operation and proper sealing characteristics.

Ball is diamond turned, after molding, to make it spherically perfect, which provides precise contact between ball and seats.
FKM seals.
Precision molded polypropylene is reinforced with fiberglass for additional strength.
PTFE self-lubricating stem bush­:ings and seats cannot stick or bind.
Self-aligning ball moves freely against the PTFE seats for smooth operation. The valve opens and closes with very little pressure onthe handle.
Stainless steel bolts.
Maximum 300 PSI

V-050/V-075/V-100 BALL VALVE KITS