Jones Stephens™ T80150 Beveled Washer, Slip Joint Thread, 1-1/2 in ID, 1-5/8 in OD, Poly
Jones Stephens™ T80150 Beveled Washer, Slip Joint Thread, 1-1/2 in ID, 1-5/8 in OD, Poly
-
BrandJones Stephens™
-
UPC717510801507
-
Manufacturer Part NumberT80150
-
CountryUSA
-
MaterialPoly
-
Thread TypeSlip Joint
-
TypeBeveled
-
Nominal Size1-1/2 in
-
Dimensions1/4 in Thk
-
Inside Diameter1-1/2 in
-
Outside Diameter1-5/8 in
- Carton quantities only
| Competitor Name | Cross-Reference Number |
|---|---|
| Ferguson | JT80150 |
-
UNSPSC40141700
-
Package Description100/CTN
-
Specification Sheet
Recently Viewed
Jones Stephens™ T80150 Beveled Washer, Slip Joint Thread, 1-1/2 in ID, 1-5/8 in OD, Poly
Jones Stephens™ T80150 Beveled Washer, Slip Joint Thread, 1-1/2 in ID, 1-5/8 in OD, Poly
2.000" X 2.720" X .468" OIL SEAL-NAT470543>
Dichtomatik N70321 O-Ring, 321 Dash Number, 1.162 in ID x 1.582 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
MORSE® 18169 8070 Type J NAS-907 Heavy Duty Jobber Length Drill Set, A Min Drill Bit, Z Max Drill Bit, 135 deg Drill Point Angle, 26 Pieces, M42 HSS-Co 8, Bright
Bore Diameter (Inner): 30 mm Outside Diameter: 62 mm Width: 16 mm Closure Type: Double shielded (metal shields on both sides, designated by "-2Z" or "ZZ") Limiting Speed: 12,000 RPM
DOUBLE SHIELDED BALL BEARING-NTN6305ZZ >
