Dichtomatik N70321 O-Ring, 321 Dash Number, 1.162 in ID x 1.582 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
-
BrandDichtomatik
-
Manufacturer Part NumberN70321
-
CountryUSA
-
Temperature Rating40 to 120 deg F
-
MaterialNitrile Rubber
-
ColorBlack
-
Inside Diameter1.162 in
-
Domestic/ImportImport
-
Durometer70 Shore A
-
Outside Diameter1.582 in
- Good chemical resistance to mineral oils and greases
- The physical and chemical resistance properties of NBR materials are determined by the acrylonitrile (ACN) content of the base polymer which can vary between 18 and 50%
- Low ACN content ensures good flexibility at low temperatures, but offers limited resistance to oils and fuels
- As the ACN content increases, the low temperature flexibility reduces and the resistance to oils and fuels improves
- Physical and chemical resistance properties of NBR materials are also affected by the cure system of the polymer
- Peroxide cured materials have improved physical properties, chemical resistance and thermal properties as compared to sulfur-donor-cured materials
- Standard grades of NBR are typically resistant to mineral oil-based lubricants and greases, many grades of hydraulic fluids, aliphatic hydrocarbons, silicone oils and greases and water to about 80 deg C
- NBR is generally not resistant to aromatic and chlorinated hydrocarbons, fuels with a high aromatic content, polar solvents, glycol based brake fluids and non-flammable hydraulic fluids (HFD)
- NBR also has low resistance to ozone, weathering and aging, but in many applications this has no negative effect
-
UNSPSC31401503
-
Standards/ApprovalsDNV Approved|FDA Compliant|ISD Certified|NFPA Listed|PTDA Certified
Recently Viewed
Dichtomatik N70321 O-Ring, 321 Dash Number, 1.162 in ID x 1.582 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
MORSE® 18169 8070 Type J NAS-907 Heavy Duty Jobber Length Drill Set, A Min Drill Bit, Z Max Drill Bit, 135 deg Drill Point Angle, 26 Pieces, M42 HSS-Co 8, Bright
Bore Diameter (Inner): 30 mm Outside Diameter: 62 mm Width: 16 mm Closure Type: Double shielded (metal shields on both sides, designated by "-2Z" or "ZZ") Limiting Speed: 12,000 RPM
DOUBLE SHIELDED BALL BEARING-NTN6305ZZ >
Weiler® 06100 Medium Face Wheel Brush, 8 in Dia Brush, 1 in W Face, 0.0104 in Dia Filament/Wire Crimped Filament/Wire, 2 in Arbor Hole
Weiler® 8 in medium face crimped wire wheel provide a flexible brushing action and consistent performance for demanding light duty cleaning and deburring applications on steel, armored steel, cast iron, ductile iron and tool steel parts. Featuring Weiler® solid ring construction, these radial brushes are available in heat treated steel, type 302 stainless steel and brass wire. 2 in arbor hole for use on CNC/milling/automatic machine, bench and pedestal grinders.
3-BOLT BEARING FLANGES-IBI47MSZPG>
