Jones Stephens
CHANNELLOCK GL10 10" UTILITY GRIPLOCK PLIERS
Get even more leverage from the ergonomically designed offset head of the GRIPLOCK®. A special jaw design allows it to grip down on many shapes for added versatility.
CHANNELLOCK 420 Tongue and Groove Plier, 1-1/2 in, 9-1/2 in OAL
The Channellock® straight jaw tongue and groove plier is the tool every home and garage needs. This plier is built to last with a PermaLock® fastener to eliminate nut and bolt failure, patented reinforcing edge to minimize stress breakage and right angle, laser heat treated teeth to provide a better, longer lasting grip. It's versatile, strong and durable enough to pass down to your kids.
CHANNELLOCK 422 9-1/2" GRVJAW TONGUE/GROOVE PLIERS
A unique jaw design creates more points of contact on round stock and tubing. This creates a stronger bite and more control all with the legendary strength of a Channellock® tongue and groove plier.
CHANNELLOCK 426 Tongue and Groove Plier, 7/8 in, 6-1/2 in OAL
The Channellock® straight jaw tongue and groove plier is the tool every home and garage needs. This plier is built to last with a PermaLock® fastener to eliminate nut and bolt failure, patented reinforcing edge to minimize stress breakage and right angle, laser heat treated teeth to provide a better, longer lasting grip. It's versatile, strong and durable enough to pass down to your kids.
CHANNELLOCK 430 Tongue and Groove Plier, 2 in, 10 in OAL
Tongue and Groove Plier, 2 in, 10 in OAL
CHANNELLOCK J440 Tongue and Groove Plier, 2-1/4 in, 12 in OAL
Channellock Tongue and Groove Plier 440 - Straight Jaw, High Carbon Steel - 12 in
drainking® 186 DK Series Water Powered Drain Cleaner
Jones Stephens™ Drain King® D18186 Inflatable Test Plug, 1-1/2 to 3 in Pipe, 6-1/2 in L, Domestic
drainking® 501 DK Series Water Powered Drain Cleaner
Jones Stephens™ Drain King® D18501 Inflatable Test Plug, 1 to 2 in, Domestic
Jones Stephens™ B28200 Copper Fitting Brush, 2 in ID x 2-1/8 in OD Dia
Jones Stephens™ B28200 Copper Fitting Brush, 2 in ID x 2-1/8 in OD Dia
Jones Stephens™ B90050 1-Piece Ball Valve, 1/2 in, Solvent, PVC Body, Standard Port, EPDM Softgoods
Jones Stephens™ B90050 1-Piece Ball Valve, 1/2 in, Solvent, PVC Body, Standard Port, EPDM Softgoods
Jones Stephens™ B90075 1-Piece Ball Valve, 3/4 in, Solvent, PVC Body, Standard Port, EPDM Softgoods
Jones Stephens™ B90075 1-Piece Ball Valve, 3/4 in, Solvent, PVC Body, Standard Port, EPDM Softgoods
Jones Stephens™ B90100 1-Piece Ball Valve, 1 in, Solvent, PVC Body, Standard Port, EPDM Softgoods
Jones Stephens™ B90100 1-Piece Ball Valve, 1 in, Solvent, PVC Body, Standard Port, EPDM Softgoods
Jones Stephens™ B90125 1-Piece Ball Valve, 1-1/4 in, Solvent, PVC Body, Standard Port, EPDM Softgoods
Jones Stephens™ B90125 1-Piece Ball Valve, 1-1/4 in, Solvent, PVC Body, Standard Port, EPDM Softgoods
Jones Stephens™ B90250 1-Piece Quarter-Turn Ball Valve, 2-1/2 in, Solvent, PVC Body, Standard Port, EPDM Softgoods
Jones Stephens™ B90250 1-Piece Quarter-Turn Ball Valve, 2-1/2 in, Solvent, PVC Body, Standard Port, EPDM Softgoods
Jones Stephens™ B90300 1-Piece Quarter-Turn Ball Valve, 3 in Nominal, Solvent End Style, PVC Body, Standard Port, EPDM Softgoods
Jones Stephens™ B90300 1-Piece Quarter-Turn Ball Valve, 3 in Nominal, Solvent End Style, PVC Body, Standard Port, EPDM Softgoods
Jones Stephens™ B91050 1-Piece Quarter-Turn Ball Valve, 1/2 in Nominal, Thread End Style, PVC Body, Standard Port, EPDM Softgoods
Jones Stephens™ B91050 1-Piece Quarter-Turn Ball Valve, 1/2 in Nominal, Thread End Style, PVC Body, Standard Port, EPDM Softgoods
Jones Stephens™ B91075 1-Piece Quarter-Turn Ball Valve, 3/4 in Nominal, Thread End Style, PVC Body, Standard Port, EPDM Softgoods
Jones Stephens™ B91075 1-Piece Quarter-Turn Ball Valve, 3/4 in Nominal, Thread End Style, PVC Body, Standard Port, EPDM Softgoods
Jones Stephens™ B91100 1-Piece Quarter-Turn Ball Valve, 1 in Nominal, Thread End Style, PVC Body, Standard Port, EPDM Softgoods
Jones Stephens™ B91100 1-Piece Quarter-Turn Ball Valve, 1 in Nominal, Thread End Style, PVC Body, Standard Port, EPDM Softgoods
Jones Stephens™ B91150 1-Piece Quarter-Turn Ball Valve, 1-1/2 in Nominal, Thread End Style, PVC Body, Standard Port, EPDM Softgoods
Jones Stephens™ B91150 1-Piece Quarter-Turn Ball Valve, 1-1/2 in Nominal, Thread End Style, PVC Body, Standard Port, EPDM Softgoods
Jones Stephens™ B91250 1-Piece Quarter-Turn Ball Valve, 2-1/2 in Nominal, Thread End Style, PVC Body, Standard Port, EPDM Softgoods
Jones Stephens™ B91250 1-Piece Quarter-Turn Ball Valve, 2-1/2 in Nominal, Thread End Style, PVC Body, Standard Port, EPDM Softgoods
Jones Stephens™ B91300 1-Piece Quarter-Turn Ball Valve, 3 in Nominal, Thread End Style, PVC Body, Standard Port, EPDM Softgoods
Jones Stephens™ B91300 1-Piece Quarter-Turn Ball Valve, 3 in Nominal, Thread End Style, PVC Body, Standard Port, EPDM Softgoods
Jones Stephens™ B91400 1-Piece Quarter-Turn Ball Valve, 4 in Nominal, Thread End Style, PVC Body, Standard Port, EPDM Softgoods
Jones Stephens™ B91400 1-Piece Quarter-Turn Ball Valve, 4 in Nominal, Thread End Style, PVC Body, Standard Port, EPDM Softgoods
Jones Stephens™ C02050 Enduro Closet Bolt, 2-1/2 in OAL, Plastic
Jones Stephens™ C02050 Enduro Closet Bolt, 2-1/2 in OAL, Plastic
Jones Stephens™ C04019 Eljer® Touch Flush Assembly, For Use With Toilet Repair
Jones Stephens™ C04019 Eljer® Touch Flush Assembly, For Use With Toilet Repair
Recently Viewed
The 3805D is used to measure the hardness of Rubber, Hard Plastics: Harder grades such as rigid thermoplastics, plexiglass, thermoploystrene, vinyl, sheet, cellulode acetate, thermosetting, Laminates (ie fornica), Other: Paper filled calendar rolls, calendar bowls, etc. (materials that would not normally indent under fingernail pressure, such as a pocket comb or bowling ball). Note: These units are not designed to ASTM specifications and cannot be certified as such.
Posi Lock® 10656 Ball Lock Pin, For Use With 106/206 Manual Puller and TJ-2 Transmission Bearing Puller
Posi Lock® 10656 Ball Lock Pin, For Use With 106/206 Manual Puller and TJ-2 Transmission Bearing Puller
Weiler® 44003 Counter Duster, 8 in L Brush, 13-1/4 in L x 1-3/4 in W Block, 8 in OAL, 2-1/4 in L Horsehair Trim, Fine Bristle Firmness
Weiler® 44003 Counter Duster, 8 in L Brush, 13-1/4 in L x 1-3/4 in W Block, 8 in OAL, 2-1/4 in L Horsehair Trim, Fine Bristle Firmness
The Grey Pneumatic 3/8" Drive x 1/2" Standard Universal Socket (1016U) is a reliable and durable impact socket designed for use with impact tools. It's made from high-quality chrome-molybdenum steel, ensuring strength and longevity. This socket is ideal for professional and DIY users who need a versatile and dependable tool for a variety of tasks.
KEY FEATURES AND BENEFITS:
Impact-Rated: Designed to withstand the high torque and impact forces generated by impact tools.
Durable Construction: Made from chrome-molybdenum steel for exceptional strength and durability.
Versatile Design: 3/8" drive and 1/2" short universal socket for compatibility with various tools and fasteners.
6-Point Design: Provides a better grip and reduces the risk of stripping fasteners.
Optimized Design: Transfers pressure from the thinner part of the socket wall to the thicker section, increasing strength and reducing the risk of breakage.
SPECIFICATIONS:
Drive: 3/8"
Size: 1/2"
Type: Universal
Points: 6
Material: Chrome-molybdenum steel
Length: Short
KNAACK® 977-2PK Gas Spring
Grey Pneumatic 3/8" Drive x 5/16" Standard Universal Socket (1010U) is a high-quality impact socket designed for use with 3/8" drive impact wrenches. Its universal design allows it to fit hex, square, and triangular bolts, making it a versatile tool for a variety of applications.
KEY FEATURES AND BENEFITS:
Universal Flexibility: Fits multiple fastener types for versatility.
Impact-Resistant: Built to withstand the rigors of heavy-duty work.
Durable Construction: Made from high-quality chrome-molybdenum steel.
Short Length: Provides better access in tight spaces.
Six-Point Design: Offers better grip and engagement with fasteners.
Enhanced Strength: Designed to transfer pressure for increased durability.
SPECIFICATIONS:
Drive Size: 3/8"
Socket Size: 5/16"
Type: Universal
Material: Chrome-molybdenum steel
Designed for: Impact tools