FITTINGS 1-1/4"-MPT X 1/4"FPT BLACK BUSHING FIT 1-1/4 X 1/4-B-B
1-1/4 -MALE PIPE THREADX1/4 FEMALE PIPE THREAD BLACK BUSHING
-
BrandSM
-
Manufacturer Part NumberSBHB01.25X.250
-
CountryUSA
-
FinishGalvanized
-
MaterialMalleable Iron
-
Fitting/Connector TypeBushing
-
Pressure Class150 lb
-
ColorBlack
-
Nominal Size1-1/4 x 1/4 in
-
Dimensions1.15 in W
Recently Viewed
1-1/4 -MALE PIPE THREADX1/4 FEMALE PIPE THREAD BLACK BUSHING
W-1/4 INA BEARING compact, single-direction axial deep groove ball thrust bearing
• Bore Diameter (d): 1/4 inch (6.35 mm)
• Outside Diameter (D): 13/16 inch / 0.8125 inches (20.64 mm)
• Height / Width (T): 3/8 inch / 0.375 inches (9.525 mm)
• Raceway Style: Grooved races on both washers for precise ball guidance
• Load Capacities: 1,053 lbf Dynamic Axial / 1,170 lbf Static Axial
• Limiting Speed: 12,000 RPM (Grease) / 15,000 RPM (Oil)
Browning® 767673 VPLS 100 Intermediate Duty Pillow Block Ball Bearing, 1/2 in Dia Bore, 3-3/16 to 4-1/16 in L Bolt Center-to-Center, 1-1/16 in Base to Bore Centerline, 4-7/8 in OAL x 2-3/32 in OAH
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric, or BOA concentric locking collar. The contact seal, with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction. Depending on your preference, these bearings are available in inch and metric bore with a wide variety of cast iron, stamped steel or rubber mount housings or specific industry solutions as illustrated on the pages to follow.
Browning® 767582 VPS 100 1-Piece Intermediate Duty Pillow Block Ball Bearing, 1-1/8 in Dia Bore, 4.72 in L Bolt Center-to-Center, 1-11/16 in Base to Bore Centerline, 5.94 in OAL x 3.16 in OAH
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with set screw, eccentric or BOA concentric locking collar. The contact seal with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction. Depending on your preference, these bearings are available in inch and metric bore with a wide variety of cast iron, stamped steel or rubber mount housings or specific industry solutions as illustrated on the pages to follow.
W-1-1/2 INA BEARINGsingle-direction thrust ball bearing
• Bore Diameter (d): 1-1/2 inches (1.500 in / 38.10 mm)
• Outside Diameter (D): 2-3/8 inches (2.375 in / 60.33 mm)
• Height / Width (T): 3/4 inch (0.750 in / 19.05 mm)
• Design Type: Grooved race, 3-piece separable construction
• Enclosure: Open (unsealed)
RECOMMENDED USE: For use on Paint (Body filler, paint, primers), Metal (Ferrous metals), Aluminum (Non-ferrous metals) and Wood (Plastics, wood and fiberglass) FEATURES: Aluminum oxide grain provides a fast cut with long life, stearate coating and semi open coat structure prevents loading. 80-150 Grit: "D" - heavy-weight, low flexibility paper backing. 180-400 Grit: "C" - medium-weight, low flexibility paper backing. For automotive body work, removing varnish from wood, sanding fiberglass, and for use on metal. For use on random orbital or low speed DA sanders - For dry use only. Available in PSA Disc Rolls. COMPATIBILITY: Disc Sander SPECIFICATIONS: 6" diameter, 400 grit
