Rust-Oleum ECONOMY SANDABLE GRAY SPRAY PRIMER RUS 2401
Rust-Oleum High Performance 2300 System Inverted Striping Spray Paint creates bright, sharp and long-lasting lines for a variety of surfaces. This oil-based paint is ideal for parking lots, warehouse aisles, pallet positions, stadiums and more.
-
BrandHigh Performance®
-
UPC020066010027
-
Manufacturer Part Number2391838V
-
CountryUSA
-
Chemical CompositionAcetone/Propane/Titanium Dioxide/n-Butyl Acetate/n-Butane/Xylenes (o-, m-, p- Isomers)/Ethyl 3-Ethoxypropionate/Kaolin Clay/Ethylbenzene
-
FormAerosolized Mist
-
ColorWhite
-
Container Size18 oz
-
Series2300 System
-
Odor/ScentSolvent Like
-
Temperature Rating50 to 100 deg F
-
FinishFlat
-
TypeEconomical
-
VOC Content602 g/L
-
Container TypeAerosol Can
-
Coverage5 to 8 sq-ft/can
- Interior/Exterior use on concrete, gravel, grass, pavement and more
- Great for a variety of spray paint needs where durability and long term quality are not required
- Indoor/outdoor use
- Aerosol spray application method
- Applicable materials are metals, wood, concrete, masonry
- 10 oz net fill
- 1 hr dry time
- Low cost aerosol
- Great for marking, color-coding, stenciling and a variety of spray paint needs
- Use with Rust-Oleum® marking wand or pistol for quick and accurate site markings
- 5 years shelf life
| Competitor Name | Cross-Reference Number |
|---|---|
| MSC | 08140022 |
-
Standards/ApprovalsPROP65: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
-
UNSPSC31211500
-
Package Description6/PK
-
SDS
Recently Viewed
Rust-Oleum High Performance 2300 System Inverted Striping Spray Paint creates bright, sharp and long-lasting lines for a variety of surfaces. This oil-based paint is ideal for parking lots, warehouse aisles, pallet positions, stadiums and more.
NEEDLE BEARING WASHER-INATWC1220>
1-5/8"-ID NEEDLE BEARING-INANCS2616>
Browning® 1228790 Finished Bore Straight Miter Gear With Hardened Teeth, Keyway and Setscrew, 5/8 in Dia Bore
Bevel and miter gearing is a form of gearing in which the tooth-bearing surfaces are the faces of the gears rather than the edges. In bevel and miter gearing, the gears are cone shaped. This allows the edges of the mating gears to mesh and transmit torque. The geometry of the mesh creates a 90 deg angle. As a result, this type of gearing is suitable for applications where a change of direction is required. Other designs exist to create other angles however 90 deg serves the majority of applications. In bevel and miter gearing the input and output shaft are intersecting. It is typical for bevel and miter gear reducers to have lower reduction ratios. For example, 5:1 and lower are typical and they are different than other types of gearing. Two types of bevel and miter gearing are typical. These are straight and spiral. As the name implies, the teeth of straight bevel gears are cut straight. This means that the teeth are oriented perpendicular to the outside edge of the gear. The teeth on spiral bevel gears are cut at an angle to the outside edge of the gear. This type of gearing is said to have "helical" teeth and the angle is called the "helix" angle. Bevel and miter gearing have proven reliable for many years. The use of this type of gearing extends across many industries. Some of these include food processing, woodworking, paper and textile.
Our LB lever hoist forged an entirely new, industry leading benchmark by being smaller, lighter and stronger than any other lever hoist on the market. This hoist can be used horizontally, vertically, inverted or at any other load angle and its proven strength and durability stand up in an endless array of applications.
3/4"-ID NEEDLE BEARING-INANCS1212>
