SPRAY-ON APWA WHITE U/D W/B MARKING PAINT SPR 03901
Krylon® A03901004 Industrial Marking Paint, 20 oz Container, Brilliant White, 664 Linear ft Coverage, >10 min Curing
-
BrandKrylon®
-
UPC075577939015
-
Manufacturer Part NumberA03901
-
CountryUSA
-
Temperature Rating70 to 80 deg F
-
Chemical CompositionPropane, Toluene, Butane, Hexane, Titanium Dioxide, Xylene, 2-Methylpentane, Light Aliphatic Hydrocarbon Solvent, Ethylbenzene
-
FormLiquid
-
ColorAPWA Brilliant White
-
TypeWater Base
-
VOC Content0.3724
-
Viscosity<20.5 cSt
-
Container Size20 oz
-
Container TypeAerosol Can
-
Coverage332 Linear ft
-
pH Range7
-
Curing Time>10 min
- Marking paints have a high solids formulation that gives them the boldest, brightest and most visible markings in the industry
- These fast drying products penetrate and adhere to hot surfaces, and deliver a line you can count on for all your locating, marking and surveying needs
- Free of lead hazards
- Convenient spray Thru™ cap
- Alkyd enamel resin
- Great for short-term markings
- For proposed excavation applications
- 17 oz net weight
- 0.88 specific gravity
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 38EL36 |
| Grainger | 38EL36 |
-
UNSPSC31211513
-
Package Description12/PK
-
Standards/ApprovalsOSHA 29 CFR 1910.1200|NIOSH/MSHA Approved
-
Specification Sheet
-
SDS
Recently Viewed
Krylon® A03901004 Industrial Marking Paint, 20 oz Container, Brilliant White, 664 Linear ft Coverage, >10 min Curing
RIDGID® 97457 VF6000 5-Layer Vacuum Filter, Green
Open up clogged grease fittings with the Grease Buster. Simply fill with a solvent and tap the piston with a hammer. The updated design includes a textured grip and two O rings on the piston. Manufactured by LockNLube in the USA. Cleans and flushes out old dried grease from fittings, pins, shafts, bushingsand joints, Uses penetrating fluid and hydraulic pressure, Reduces downtime. Much cheaper than new bearings, Hose extension and pneumatic piston available, Not for use with sealed bearings
Alemite® A1184 Button Head Fitting, 1/8 in PTF Thread, 3/4 in OAL, 11/32 in L Shank, Trivalent Zinc Plated
Alemite® A1184 Button Head Fitting, 1/8 in PTF Thread, 3/4 in OAL, 11/32 in L Shank, Trivalent Zinc Plated
0.76"-ID TAPERED ROLLER THRUST BEARING - TIMT77>
1 -MALE PIPE THREADX2-1/2 GALVANIZED NIPPLE


