Rust-Oleum® 292606 Acrylic Primer, 1 gal Container, Liquid Form, Gray, 155 to 520 sq-ft/gal Coverage, 7 days Curing
Rust-Oleum''s Universal Acrylic Primer is specifically formulated for application to a variety of surfaces that include metal, wood, concrete, plaster, wallboard, hardboard, glass, and tile. The rust inhibitive formulation also makes it an ideal choice for direct application to steel. The primer is also an excellent stain blocker and resists growth of mold and mildew.
-
BrandRust-Oleum®
-
UPC020066309138
-
Manufacturer Part Number292606
-
CountryUSA
-
Temperature Rating50 to 90 deg F
-
Chemical CompositionTitanium Dioxide/Ethylene Glycol/Kaolin Clay/Hydrous Magnesium Silicate/Zinc Oxide/Distillates (Petroleum) Solvent-Dewaxed Heavy Paraffinic/Oxirane, 2-Methyl-, Polymer with Oxirane, Monobutyl Ether/Sodium Nitrite/2,2,4-Trimethyl-1,3-Pentanediol Monoisobutyrate/2,2'-Ethylenedioxydiethyl bis(2-ethylhexanoate)/Carbamic Acid, 1H-Benzimidazol-2-yl-, Methyl Ester
-
FormLiquid
-
ColorGray
-
VOC Content<100 g/L
-
Container Size1 gal
-
Coverage155 to 520 sq-ft/gal
-
Curing Time7 days
-
Odor/ScentMild
- For interior and exterior applications
- Mold and mildew resistant, rust preventive
- Tintable formula
- Clean surface with Rust-Oleum
- Pre-Paint and Cleaning Wipes prior to painting
- Excellent hide and adhesion
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 39UL80 |
-
Standards/ApprovalsPROP65: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
-
Specification Sheet
Recently Viewed
Rust-Oleum® 292606 Acrylic Primer, 1 gal Container, Liquid Form, Gray, 155 to 520 sq-ft/gal Coverage, 7 days Curing
Rust-Oleum''s Universal Acrylic Primer is specifically formulated for application to a variety of surfaces that include metal, wood, concrete, plaster, wallboard, hardboard, glass, and tile. The rust inhibitive formulation also makes it an ideal choice for direct application to steel. The primer is also an excellent stain blocker and resists growth of mold and mildew.
Browning® 767676 VPS 100 Intermediate Duty Pillow Block Ball Bearing, 3/4 in Dia Bore, 3-3/8 to 4-3/16 in L Bolt Center-to-Center, 1-5/16 in Base to Bore Centerline, 5 in OAL x 2-17/32 in OAH
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric, or BOA concentric locking collar. The contact seal, with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction. Depending on your preference, these bearings are available in inch and metric bore with a wide variety of cast iron, stamped steel or rubber mount housings or specific industry solutions as illustrated on the pages to follow.
Browning® 767340 VPS 100 Intermediate Duty Pillow Block Ball Bearing, 1-3/8 in Dia Bore, 4-21/32 to 5-11/32 in L Bolt Center-to-Center, 1-7/8 in Base to Bore Centerline, 6-1/4 in OAL x 3-9/16 in OAH
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric, or BOA concentric locking collar. The contact seal, with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction. Depending on your preference, these bearings are available in inch and metric bore with a wide variety of cast iron, stamped steel or rubber mount housings or specific industry solutions as illustrated on the pages to follow.
Weiler® 21167 Power Tube Brush, 1-1/4 in Dia x 2-1/2 in L, 5-1/2 in OAL, 0.0104 in Dia Filament/Wire, Steel Fill
Weiler® 21167 Power Tube Brush, 1-1/4 in Dia x 2-1/2 in L, 5-1/2 in OAL, 0.0104 in Dia Filament/Wire, Steel Fill
Browning® 767755 VPS 100 Intermediate Duty Pillow Block Ball Bearing, 1-7/16 in Dia Bore, 4-5/8 to 5-3/8 in L Bolt Center-to-Center, 1-7/8 in Base to Bore Centerline, 6-3/4 in OAL x 3-11/16 in OAH
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric, or BOA concentric locking collar. The contact seal, with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction. Depending on your preference, these bearings are available in inch and metric bore with a wide variety of cast iron, stamped steel or rubber mount housings or specific industry solutions as illustrated on the pages to follow.
W-3/4 INA BEARING COMPANY
THRUST BALL BEARINGS-INAW3/4>
