Rust-Oleum 1-GAL QUICK-DRY GRAY ENAMEL PRIMER RUS 7086
Rust-Oleum® 7086402 7400 System 1-Component Quick-Dry Fast Recoat Primer, 1 gal Container, Liquid Form, Gray, 230 to 390 sq-ft/gal Coverage
-
BrandRust-Oleum®
-
UPC020066708696
-
Manufacturer Part Number7086402
-
CountryUSA
-
Temperature Rating32 to 100 deg F
-
FinishHigh Gloss
-
Chemical CompositionTalc, Medium Oil Alkyd, Aliphatic Hydrocarbon, n-Butyl Acetate, Wollastonite, Titanium Dioxide, Light Aromatic Solvent Naptha, 1,2,4-Trimethylbenzene, Carbon Black, Ethylbenzene
-
FormLiquid
-
ColorGray
-
Type1-Component Quick-Dry
-
VOC Content<450 g/L
-
Container Size1 gal
-
Container TypeCan
-
Coverage230 to 390 sq-ft/gal
-
Series7400 System
-
Odor/ScentSolvent
- Tack-free in 30 to 60 min when spray applied
- Can be left exposed up to 6 months without top-coating
- Two-year rust proof guarantee - maximum corrosion protection
- Top coat with 7400 or V7400 system DTM 450 VOC alkyd enamel
- 5 years shelf life
- Self-priming
- Resists chipping, fading and weathering
- One coat hide
- 1/2 to 1 hr tack-free dry time, 1 to 2 hr handle dry time, within 1 hr or after 24 hrs recoat dry time
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 6A931 |
-
UNSPSC31211509
-
Package Description2/PK
-
Standards/ApprovalsASTM Certified|USDA FSIS Approved
-
Specification Sheet
Recently Viewed
Rust-Oleum® 7086402 7400 System 1-Component Quick-Dry Fast Recoat Primer, 1 gal Container, Liquid Form, Gray, 230 to 390 sq-ft/gal Coverage
Steel shim is made from a full hard, cold rolled, low carbon 1008-1010 steel. Precision Brand® is the only manufacturer to offer Branded® shim. It has everything the user needs to know clearly marked right on the shim: material type, material thickness and lot # for full traceability. Used in applications where hardness, flatness and accuracy are required. Material can be punched or sheared with minimum burring and distortion. Precision Brand® shim stock is widely used in the following applications: tool and die set up, alignment, new machine assembly, machine repair and maintenance; mounting of motors, pumps and other machines, short run and prototype work, along with a variety of other industrial uses. It is especially useful for pilot production runs where material accuracy and economy are important. All Precision Brand® shim products are manufactured under rigorous quality control standards to assure high accuracy and tight tolerances.
1-QT INTERIOR WOOD SEALER-BLP701QT >
SATCO® S4717 Dimmable Specialty Incandescent Lamp, 6 W, E12 Incandescent Lamp, S6 Shape, 30 Lumens Initial
Incandescent lamps represent the original lighting technology, remaining virtually unchanged since their invention in the mid-19th century, and the lighting technology Satco was founded upon. This is the technology most everyone has become familiar with and the baseline comparison for all other lighting technologies. As the incandescent bulb becomes more and more regulated, Satco remains on the cutting edge of new lighting technologies. Still, we remain well-stocked with incandescent lamps in a multitude of wattages, base sizes, and shapes for every application.
Alemite® 1724-B 45 deg Thread Forming Fitting, 1/8 in Taper Thread, 0.83 in OAL, Steel, Trivalent Zinc Plated
Alemite thread forming fittings have special tapered drive threads which reshape the material in an untapped hole to provide a leak proof seal. They are most effectively installed by spinning into the untapped hole, but may be driven straight into the untapped hole. Thread forming fittings can be replaced by any standard threaded fitting or by another thread forming fitting.
Powers offers high quality powder loads, produced by the largest manufacturer in the United States, with unsurpassed quality and reliability. Specific load types are designed for each unique powder actuated tool. They are offered as single cartridge units for single shot tools and also collated in groups of 10 into plastic strips for semi-automatic tools.
