Crosby® 1018954 Chain Shackle, 6.5 ton Load, 7/8 in, 1 in Dia Round Pin, Hot Dipped Galvanized
Crosby® 1018954 Chain Shackle, 6.5 ton Load, 7/8 in, 1 in Dia Round Pin, Hot Dipped Galvanized
-
BrandCrosby®
-
Manufacturer Part Number1018954
-
CountryUSA
-
Load Capacity6.5 ton
-
FinishHot Dipped Galvanized
-
SeriesG-215
-
Inner Length2.86 in
-
Inner Width1-7/16 in
-
Size7/8 in
-
Opening Size1-7/16 in
-
Body MaterialCarbon Steel
-
Overall Length5.33 in
-
Overall Width3.81 in
-
Eye Outer Size2.1 in
-
Pin Diameter1 in
-
Pin MaterialAlloy
-
Pin TypeRound
- Working load limit permanently shown on every shackle
- Shackles are quenched and tempered and can meet DNV impact requirements of 42 J at -20 deg C
- Look for the Red Pin® the mark of genuine Crosby® quality
-
UNSPSC24101641
-
Standards/ApprovalsABS/DNV/Lloyds/CE Certified|Federal Spec RR-C-271F|Type IVA|Grade A|Class 1
-
Catalog
Recently Viewed
Crosby® 1018954 Chain Shackle, 6.5 ton Load, 7/8 in, 1 in Dia Round Pin, Hot Dipped Galvanized
Crosby® 1018954 Chain Shackle, 6.5 ton Load, 7/8 in, 1 in Dia Round Pin, Hot Dipped Galvanized
Multiuse gravel for a variety of decorative and landscaping applications such as gardening, patios, tree wells, walks, rooftops, fish ponds, aquariums, and more. Also for making concrete. Washed, properly graded gravel conforming to ASTM C 33 specifications. Mix with Portland cement and all-purpose sand to make concrete.
Washed, properly graded gravel conforming to ASTM C 33 specifications
Mix with Portland cement and all-purpose sand to make concrete
Can be used for a variety of decorative and landscaping applications such as gardening, patios, tree wells, walks, rooftops, fish ponds, aquariums, and more
5 LB BOX OF ROCKITE POWDERED CEMENT DRIES STRONGER THAN CONCRETE,EX PANDS AS IT DRIES-JWH270548 >
18" POUND BAG OF LIGHTWEIGHT COMPOUND FOR ONE DAY FINISHING JOBS, EASY SANDING, GREAT FOR PATCHING, LESS SHRINKAGE-JWH273597 >
7 LB BOX OF CEMENT BASE WITH SILICA SAND RESULTING IN DENSE, HARD JOINTS WITHOUT CRACKING OR SHRINKING. PEWTER. SOLD IN-JWH284637 >
McGill® CAGEROL® machined race needle bearings are manufactured from bearing quality steel. Most sizes use crowned or end relieved, rollers to help reduce end stresses and allows for greater misalignment. The rollers are separated by a steel retainer (cage) to help achieve higher speeds and provide a lubricant reservoir. CAGEROL® bearings are constructed with radial lubrication hole and groove on the outer and optional inner raceway (MI series) for relubrication through the housing or shaft. Other options include a variety of seal configurations to either help prevent contaminant entry or contain the lubricant.
