Crosby® 1019774 Chain Shackle, 1.5 ton Load, 7/16 in, 1/2 in Dia Bolt Pin, Hot Dipped Galvanized
Crosby® 1019774 Chain Shackle, 1.5 ton Load, 7/16 in, 1/2 in Dia Bolt Pin, Hot Dipped Galvanized
-
BrandCrosby®
-
Manufacturer Part Number1019774
-
CountryUSA
-
Load Capacity1.5 ton
-
FinishHot Dipped Galvanized
-
SeriesG-2150
-
Inner Length1.48 in
-
Inner Width3/4 in
-
Size7/16 in
-
Opening Size3/4 in
-
Body MaterialCarbon Steel
-
Overall Length2.67 in
-
Overall Width2.51 in
-
Eye Outer Size1.06 in
-
Pin Diameter1/2 in
-
Pin MaterialAlloy
-
Pin TypeBolt
- Working load limit and grade 6 permanently shown on every shackle
- Approved for use at -40 to 400 deg F
- Meet charpy requirements of 42 J average at -4 deg F upon special request
- Look for the Red Pin® the mark of genuine Crosby® quality
-
UNSPSC24101641
-
Standards/ApprovalsABS/DNV/Lloyds/CE Certified|ABS 2007 Steel Vessel Rule 1-11-17.7|Federal Spec RR-C271F|Type IVB|Grade A|Class 3|ASME B30.26|EN13889:2003
-
Catalog
Recently Viewed
Crosby® 1019774 Chain Shackle, 1.5 ton Load, 7/16 in, 1/2 in Dia Bolt Pin, Hot Dipped Galvanized
Crosby® 1019774 Chain Shackle, 1.5 ton Load, 7/16 in, 1/2 in Dia Bolt Pin, Hot Dipped Galvanized
TB Wood's® L095118 Straight L-Jaw Coupling Hub, L095 Coupling, 1-1/8 in Bore, 1 in, 2.11 mm Hub, Sintered Carbon Steel
IKO NTB3552 Metric Series Needle Roller Thrust Bearing, 35 mm Dia Bore, 52 mm OD, 1 Row, 2 mm W, 16300 N Dynamic/81900 N Static Load
IKO designs and manufactures thrust bearings with precisely machined cages and rollers to handle high axial loads in confined spaces. Two styles are available - thrust needle roller bearings and thrust roller bearings. Thrust Needle Roller Bearings feature needle type rollers and cages made from precisely formed, surface hardened steel plates.
Makita® A-96590 ImpactX™ Driver Bit, T30 Torx® Point, 1 in OAL, 1/4 in, S2 Steel
ImpactX™ is a line of impact-rated insert bits and fastening accessories built specifically for the demands of the professional contractor. Professionals require commercial duty bits and fastening accessories that can endure the force of high-volume screw driving applications with high torque impact drivers. Standard screwdriving bits are brittle and fit poorly into fasteners and in applications with high torque impact drivers this losing combo quickly leads to broken bits. ImpactX™ hits back with improved fitment and increased performance with high torque impact drivers. Precision machined (not forged) tips ensure full contact fit, while performance-optimized and heat-treated S2 steel provides more flex and more durability than standard, brittle bits.
3/4" X 4" Solid Dowel Pins
4" DIAMOND CONCRETE CORE BITS-MWK48164013 >
