Crosby® 1018516, G-209-7/8, Anchor Shackle, 6.5 ton Load, 7/8 in, 1 in Dia Screw Pin, Hot Dipped Galvanized
Crosby® 1018516 Anchor Shackle, 6.5 ton Load, 7/8 in, 1 in Dia Screw Pin, Hot Dipped Galvanized
-
BrandCrosby®
-
Manufacturer Part Number1018516
-
CountryUSA
-
Load Capacity6.5 ton
-
FinishHot Dipped Galvanized
-
SeriesG-209
-
Inner Length3-5/16 in
-
Inner Width2.28 in
-
Size7/8 in
-
Opening Size1-7/16 in
-
Body MaterialCarbon Steel
-
Overall Length5.83 in
-
Overall Width4-1/2 in
-
Eye Outer Size2.09 in
-
Pin Diameter1 in
-
Pin MaterialAlloy
-
Pin TypeScrew
- Working load limit and grade 6 permanently shown on every shackle
- Shackles can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds or other certification
- Approved for use at -40 to 400 deg F
- 3.25 ton through 25 ton G209 anchor shackles are type approved to DNV certification notes 2.7-1- offshore containers
- The shackles are statistical proof and impact tested to 42 J min average at -4 deg F
- The tests are conducted by Crosby® and 3.1 test certified
- All other 209 shackles can meet charpy requirements of 42 J average at -4 deg F upon special request
- Look for the Red Pin® the mark of genuine Crosby® quality
| Competitor Name | Cross-Reference Number |
|---|---|
| Grainger | 29WP66 |
-
UNSPSC24101641
-
Standards/ApprovalsABS/DNV/Lloyds/CE Certified|ASME B30.26|ABS 2007 Steel Vessel Rule 1-11-17.7|DNV Certification Notes 2.7-1|Federal Spec RR-C-271F|Type IVA|Grade A|Class 2
-
Catalog
Recently Viewed
Crosby® 1018516, G-209-7/8, Anchor Shackle, 6.5 ton Load, 7/8 in, 1 in Dia Screw Pin, Hot Dipped Galvanized
Crosby® 1018516 Anchor Shackle, 6.5 ton Load, 7/8 in, 1 in Dia Screw Pin, Hot Dipped Galvanized
MOLDED RUBBER HOSE AND CABLE BRIDGE-VESMRBR24>
Mayhew™ 21504 PRO™ Extra Long Pin Punch, 3/8 in Hex Punch, 7-7/8 in OAL, Alloy Steel
CONSOLIDATED BRG RCB-3/8 RCB Needle Roller Bearing, 0.75 in Dia Bore, 1 in Dia Outside, 1 in W
CONS RCB-3/8 RCB Needle Roller Bearing, 0.75 in Dia Bore, 1 in Dia Outside, 1 in W
Dodge® 124470 207 Normal Duty Pillow Block Ball Bearing Unit, 1-1/4 in Dia Bore, 3-1/4 in L Bolt Center-to-Center, 1.88 in Base to Bore Centerline, 4-1/4 in OAL x 3-3/4 in OAH
For over 70 years, Dodge® has been talking to mounted bearing users and listening to their needs. This experience lead to the design of the optimum mounted ball bearing. A state-of-the-art facility was built to manufacture the new Dodge® design. The result is the Dodge® SC/SCM/SL line. Its premium features make it the most reliable setscrew mounted ball bearing on the market and provides the user unmatched quality and true total value.
4-PIECE PHILLIPS SCREWDRIVER SET-ARS66639 >
