Crosby® 1018632 G2091-3/4 Anchor Shackle, 25 ton Load, 1-3/4 in, 2 in Dia Screw Pin, Hot Dipped Galvanized
Crosby® 1018632 Anchor Shackle, 25 ton Load, 1-3/4 in, 2 in Dia Screw Pin, Hot Dipped Galvanized
-
BrandCrosby®
-
Manufacturer Part Number1018632
-
CountryUSA
-
Load Capacity25 ton
-
FinishHot Dipped Galvanized
-
SeriesG-209
-
Inner Length7 in
-
Inner Width5 in
-
Size1-3/4 in
-
Opening Size2-7/8 in
-
Body MaterialCarbon Steel
-
Overall Length12.34 in
-
Overall Width9.06 in
-
Eye Outer Size4.19 in
-
Pin Diameter2 in
-
Pin MaterialAlloy
-
Pin TypeScrew
- Working load limit and grade 6 permanently shown on every shackle
- Shackles can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds or other certification
- Approved for use at -40 to 400 deg F
- 3.25 ton through 25 ton G209 anchor shackles are type approved to DNV certification notes 2.7-1- offshore containers
- The shackles are statistical proof and impact tested to 42 J min average at -4 deg F
- The tests are conducted by Crosby® and 3.1 test certified
- All other 209 shackles can meet charpy requirements of 42 J average at -4 deg F upon special request
- Look for the Red Pin® the mark of genuine Crosby® quality
| Competitor Name | Cross-Reference Number |
|---|---|
| Grainger | 48FR32 |
-
UNSPSC24101641
-
Standards/ApprovalsABS/DNV/Lloyds/CE Certified|ASME B30.26|ABS 2007 Steel Vessel Rule 1-11-17.7|DNV Certification Notes 2.7-1|Federal Spec RR-C-271F|Type IVA|Grade A|Class 2
-
Catalog
Recently Viewed
Crosby® 1018632 G2091-3/4 Anchor Shackle, 25 ton Load, 1-3/4 in, 2 in Dia Screw Pin, Hot Dipped Galvanized
Crosby® 1018632 Anchor Shackle, 25 ton Load, 1-3/4 in, 2 in Dia Screw Pin, Hot Dipped Galvanized
Armstrong® 20-126D Standard Length Socket, 1/2 in, 13/16 in, 12 Points
Campbell® can trace its beginnings back to 1834, when one of the many companies that eventually became what is today the Campbell® brand began manufacturing harnesses for horses. Over the years, countless products were added, including wire rope and chain fittings, drop forged chain hardware, high quality tackle blocks, shackles, hooks and much more.
1/2-TON 10'-LIFT HAND CHAIN HOIST
IKO designs and manufactures thrust bearings with precisely machined cages and rollers to handle high axial loads in confined spaces. Two styles are available - thrust needle roller bearings and Thrust Roller Bearings. Thrust Roller Bearings feature caged cylindrical rollers and are well suited to applications requiring high accuracy at high speeds and fluctuating heavy loads.
Dichtomatik N70013 O-Ring, 013 Dash Number, 0.426 in ID x 0.566 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
