Justrite® 08211 Drum Vent Fill, For Use With 2 in Drum Bung, 2 in NPT, Polyethylene
Safety fill vents and funnels fit the 2 in bung on a vertically-stored drum. The brass vent provides automatic pressure and vacuum relief and includes a brass cap with safety chain tethered to the vent to prevent misplacement or loss. Remove cap during drum filling operations. Model no. 08211 includes a 9 in wide polyethylene funnel to facilitate solvent waste disposal and reduce spillage. Keep vent capped in closed position after filling operations to prevent flammable vapor from escaping. 6 in flame arrester safely dissipates heat and prevents flashback from external ignition sources.
-
BrandJustrite®
-
UPC697841001268
-
Manufacturer Part Number08211
-
CountryUSA|Canada
-
MaterialPolyethylene
-
Dimensions9 in Dia x 7.438 in H
-
Specifications2 in NPT
-
Suitable For Use With2 in Drum Bung
-
UNSPSC24101900
-
Standards/ApprovalsFM Approved|PROP65: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
-
Alternative Part Number8211
Recently Viewed
Justrite® 08211 Drum Vent Fill, For Use With 2 in Drum Bung, 2 in NPT, Polyethylene
Safety fill vents and funnels fit the 2 in bung on a vertically-stored drum. The brass vent provides automatic pressure and vacuum relief and includes a brass cap with safety chain tethered to the vent to prevent misplacement or loss. Remove cap during drum filling operations. Model no. 08211 includes a 9 in wide polyethylene funnel to facilitate solvent waste disposal and reduce spillage. Keep vent capped in closed position after filling operations to prevent flammable vapor from escaping. 6 in flame arrester safely dissipates heat and prevents flashback from external ignition sources.
Browning 30:1 L/H RAIDER WORM GEAR REDUCERS BRW 206-Q-56-L-30
Raider® Plus worm gear reducers represent the most flexible worm gear product in the power transmission solutions portfolio. With a large variety of add-on accessories, the Raider® Plus line of worm gear reducers is a problem solver. Four unit styles form the basis of this vast product offering. These are the universal style ("U" style, shaft input) with an output shaft and the C-face style ("Q" style, input quill) with an output shaft. Both the "U" and "Q" styles are also available with hollow outputs. The Raider® Plus worm gear reducer is designed as an industry interchange. It is dimensionally interchangeable with the major industry competitors.
10-24X1-1/2" BUTTON HEAD SOCKET HEAD CAPSCREW-NBS7050100150 >
MORSE® 17123 2330 1-Stage Type J Heavy Duty Jobber Length Aircraft Drill, 3/32 in Drill - Fraction, 0.0938 in Drill - Decimal Inch, 135 deg Point, Cobalt
6-32" X 1/2" USS BUTTON HEAD SOCKET HEAD CAPSCREW-NBS7050060050 >
MORSE® 14552 1385 1-Stage Type B Heavy Duty Jobber Length Aircraft Drill, 27/64 in Drill - Fraction, 0.4219 in Drill - Decimal Inch, 135 deg Point, HSS
