Campbell® T4900524 Cold Shut, 5/16 in Trade, 1300 lb Load, Mild Steel, Zinc Plated
Campbell® can trace its beginnings back to 1834, when one of the many companies that eventually became what is today the Campbell® brand began manufacturing harnesses for horses. Over the years, countless products were added, including wire rope and chain fittings, drop forged chain hardware, high quality tackle blocks, shackles, hooks and much more.
-
BrandCampbell®
-
UPC020418201448
-
Manufacturer Part NumberT4900524
-
CountryUSA|Canada
-
Load Capacity1300 lb
-
FinishZinc Plated
-
MaterialMild Steel
-
Trade Size5/16 in
- Connections for Chain and Attachments
- When Using Cold Shuts with Chain, Use One Size Larger Than Chain Size
- With A Hammer, Drive the Open End Through the Cold Shut Eye
- Peen the Extended End to Prevent Opening
- Note - Cold Shuts Should Not Be Reused After Closure Has Been Made
- Do not exceed the working load limit
- Do not use for overhead lifting or hoisting
| Competitor Name | Cross-Reference Number |
|---|---|
| Grainger | 24F409 |
-
UNSPSC24101600
-
Package DescriptionEACH
-
WarrantyLifetime Limited
Recently Viewed
Campbell® T4900524 Cold Shut, 5/16 in Trade, 1300 lb Load, Mild Steel, Zinc Plated
Campbell® can trace its beginnings back to 1834, when one of the many companies that eventually became what is today the Campbell® brand began manufacturing harnesses for horses. Over the years, countless products were added, including wire rope and chain fittings, drop forged chain hardware, high quality tackle blocks, shackles, hooks and much more.
Crosby® 1019481, 2130-1/2, Anchor Shackle, 2 ton Load, 1/2 in, 0.64 in Dia Bolt Pin, Self-Colored
Crosby® 1019481 Anchor Shackle, 2 ton Load, 1/2 in, 0.64 in Dia Bolt Pin, Self-Colored
Crosby® 1018393, G-209-5/16, Anchor Shackle, 0.75 ton Load, 5/16 in, 3/8 in Dia Screw Pin, Hot Dipped Galvanized
Crosby® 1018393 Anchor Shackle, 0.75 ton Load, 5/16 in, 3/8 in Dia Screw Pin, Hot Dipped Galvanized
Gates® Power Transmission Super HC® Molded Notch PowerBand® 2/3VX900 Heavy Duty Molded Notch V-Belt, 3VX Section, 3/8 in W Top, 90 in L Outside, 21/64 in THK, EPDM
When your power transmission application needs a high horsepower solution but is constrained by drive weight or physical space, the answer is Super HC™ Molded Notch belts. Our proprietary ethylene construction process provides a superior combination of flex and load-carrying capacity, transmitting up to three times the horsepower versus comparably sized belts. Super HC MN V-belts put more power where high speeds, high speed ratios or small pulley diameters are required, offering significant benefits over classical section V-belts.
Crosby® 1018017, G-213-1/4, Anchor Shackle, 0.5 ton Load, 1/4 in, 5/16 in Dia Round Pin, Hot Dipped Galvanized
Crosby® 1018017 Anchor Shackle, 0.5 ton Load, 1/4 in, 5/16 in Dia Round Pin, Hot Dipped Galvanized
Crosby® 1019506, 2130-5/8, Anchor Shackle, 3.25 ton Load, 5/8 in, 0.77 in Dia Bolt Pin, Self-Colored
Crosby® 1019506 Anchor Shackle, 3.25 ton Load, 5/8 in, 0.77 in Dia Bolt Pin, Self-Colored
