Stanley Black & Decker
POWERS 1/2" X 3-3/4" CONCRETE ANCHORS PWR 7422
The Power-Stud®+ SD1 Anchor is a fully threaded, torque controlled, wedge expansion Anchor which is designed for consistent performance in cracked and uncracked concrete. Suitable base materials include normal weight concrete, sand lightweight concrete, concrete over steel deck and grouted concrete masonry. The Anchor is manufactured with a zinc plated carbon steel body and expansion clip for premium performance. Nut and washer are included.
POWERS 1/2" X 3-1/2"MUSH/HD MASONRY SPIKE PWR 5571
The Spike® is a 1-piece, vibration-resistant anchor for use in concrete block or stone. Several head styles, including tamperproof versions and anchor materials are available. The Spike® anchor is formed with an "s" shaped configuration at the working end of the anchor to create an expansion mechanism. Since the anchor is pre-formed, there is no secondary tightening operation required which greatly reduces the overall cost of an anchor installation.
POWERS 1/2" X 2" SAMMY ROD HANGER BOLTS PWR PFM-2211280
Hangermate® is an all steel threaded fastening system for suspending steel threaded rod vertically overhead in pipe hanging, fire protection, electrical conduit and cable-tray applications. They are available in versions which can be installed in a variety of base materials including steel purlins, bar joists and beams, wood frame columns and beams, as well as concrete ceilings, beams and columns. Steel threaded rods in 1/4 and 3/8 in diameters can be vertically suspended with Hangermate® (a 1/2 in Dia size is also available for wood). They are also offered in a side mount style for lateral installation of 1/4 and 3/8 in Dia steel threaded rods onto joists, columns and overhead members. For all steel and wood hangers, a Hangermate® socket driver is recommended to provide proper installation with a drill screw gun. For concrete hangers, a powered impact tool with a clutch is recommended. A pivot head version is also available for flexible connection angle and positioning of rod hangers. An acoustical ceiling eyelet version is also available for hanging wire or cable attachments.
POWERS 1/2" X 2-3/4" S/S CONCRETE ANCHORS PWR 7320
The Power-Stud® anchor is a one piece fully threaded, wedge style anchor available in carbon steel and stainless steel. Threaded, rod hanger and tie wire versions are designed for use in solid concrete. The drill bit diameter needed for proper installation is the same as the anchor diameter.
POWERS 1/2" X 2-3/4" Mushroom Head Masonry Spike PWR-5569
The Spike® is a 1-piece, vibration-resistant anchor for use in concrete block or stone. Several head styles, including tamperproof versions and anchor materials are available. The Spike® anchor is formed with an "s" shaped configuration at the working end of the anchor to create an expansion mechanism. Since the anchor is pre-formed, there is no secondary tightening operation required which greatly reduces the overall cost of an anchor installation.
POWERS 1/2" X 2-1/2" WEDGE BOLT ANCHORS PWR 7242
The wedge bolt anchor is a one piece, heavy duty screw anchor with a finished hex head. It is simple to install, easy to identify, fully removable and vibration resistant. The Wedge- bolt has many unique features and benefits that make it well suited for many applications in a variety of base materials. Optimum performance is obtained using a combination of patented design concepts.
POWERS 1" X 9" ZINC CONCRETE ANCHORS PWR 7463
The Power-Stud®+ SD1 Anchor is a fully threaded, torque controlled, wedge expansion Anchor which is designed for consistent performance in cracked and uncracked concrete. Suitable base materials include normal weight concrete, sand lightweight concrete, concrete over steel deck and grouted concrete masonry. The Anchor is manufactured with a zinc plated carbon steel body and expansion clip for premium performance. Nut and washer are included.
POWERS 1" X 9" STAINLESS STEEL CONCRETE ANCHORS PWR 7363
The Power-Stud® anchor, is a fully threaded, torque controlled, Wedge Expansion Anchor. It is available in a threaded version suitable for applications in solid concrete and grout-filled concrete masonry. The threaded version is produced in type 304 and type 316 stainless steel.
POWERS 1" X 6" ZINC CONCRETE ANCHORS PWR 7461
The Power-Stud®+ SD1 Anchor is a fully threaded, torque controlled, wedge expansion Anchor which is designed for consistent performance in cracked and uncracked concrete. Suitable base materials include normal weight concrete, sand lightweight concrete, concrete over steel deck and grouted concrete masonry. The Anchor is manufactured with a zinc plated carbon steel body and expansion clip for premium performance. Nut and washer are included.
POWERS 1" X 12" STAINLESS STEEL CONCRETE ANCHORS PWR 7365
The Power-Stud® anchor, is a fully threaded, torque controlled, Wedge Expansion Anchor. It is available in a threaded version suitable for applications in solid concrete and grout-filled concrete masonry. The threaded version is produced in type 304 and type 316 stainless steel.
POWERS 1" POWDER ACT .300 HEAD PINS PWR 50382
Threaded studs are available in 1/4-20 and 3/8-16 thread diameters with a variety of external thread and shank lengths for use in concrete, concrete over steel deck, concrete masonry walls and steel. They are used for applications where it may be desirable to remove the fixture or where shimming may be required or for suspending small diameter pipe (e.g. water lines, sprinkler systems). Knurled shank designs are available to increase performance in steel base materials. A plastic flute is mounted on the pin shank to retain the drive pin in the barrel of the tool providing guidance during the driving operation. Rod hangers and post nut hanger clips are available for suspending mechanical and electrical components from concrete and steel. They have an internally threaded clip or post nut designed to accept either 1/4-20 or 3/8-16 threaded rod. For the electrical trade, BX and EMT (electrical metallic tubing) conduit clips are provided in various sizes for attaching conduit to base materials where easy removal is not a requirement. Rebar basket clips are typically used in highway construction and paving applications to hold the support baskets for the reinforcing bars in place while the concrete is being poured.
POWERS 1-1/4" X 12" ZINC CONCRETE ANCHORS PWR 7475
The Tough System® DS130 case features durable and thick structural foam walls, integrated water seal and rust-resistant metal latches. Storage pockets on the lid and 4 removable cups allow for storing small parts and side latches allow the product to be stacked to other modules of the Tough System® storage line.
POWERS #14-#16 X 1-1/2" PLASTIC ANCHORS PWR 7589
The bantam plug is a plastic anchor designed for use with lightweight fixtures. It can be used in concrete, block and brick. It is also suggested for use in wallboard. Holding values in wallboard tend to be inconsistent, other wall anchors may be considered depending on the application. The bantam plug anchor is injection molded from an engineered plastic and is designed to be used in conjunction with a sheet metal or wood screw. These fasteners are not recommended for use overhead or applications where holding values are critical.
POWERS .300"-HEAD POWDER HAMMER 3" PINS PWR 50120
Drive pins with a 0.3 in Dia head are designed for permanently fastening a fixture to concrete, concrete over steel deck, concrete masonry walls and A36 or A572/A992 structural steel. The fasteners are manufactured with a 0.145 in Dia shank in various lengths. Knurled shank designs are available for installations in thick steel base materials. A plastic flute is mounted on the pin shank to retain the drive pin in the barrel of the tool and provide guidance during the driving operation. The fasteners are also available in with a mechanically galvanized (MG) coating for use in treated lumber.
POWERS .22-CALIBER POWDER HAMMER 2" PINS PWR 50096
Drive pins with a 0.3 in Dia head are designed for permanently fastening a fixture to concrete, concrete over steel deck, concrete masonry walls and A36 or A572/A992 structural steel. The fasteners are manufactured with a 0.145 in Dia shank in various lengths. Knurled shank designs are available for installations in thick steel base materials. A plastic flute is mounted on the pin shank to retain the drive pin in the barrel of the tool and provide guidance during the driving operation. The fasteners are also available in with a mechanically galvanized (MG) coating for use in treated lumber.
POWER 5/8" X 8-1/2" CONCRETE ANCHORS PWR 7438
The Power-Stud®+ SD1 Anchor is a fully threaded, torque controlled, wedge expansion Anchor which is designed for consistent performance in cracked and uncracked concrete. Suitable base materials include normal weight concrete, sand lightweight concrete, concrete over steel deck and grouted concrete masonry. The Anchor is manufactured with a zinc plated carbon steel body and expansion clip for premium performance. Nut and washer are included.
POWER 3/4" X 4-3/4" S/S CONCRETE ANCHORS PWR 7341
The Power-Stud® anchor, is a fully threaded, torque controlled, Wedge Expansion Anchor. It is available in a threaded version suitable for applications in solid concrete and grout-filled concrete masonry. The threaded version is produced in type 304 and type 316 stainless steel.
Porter-Cable X-LONG SQUARE DRIVE BITS POR 5504
Porter-Cable® 5504 Extra Long Magnetic Square Drive Power Bit
Porter-Cable WHEEL RING NUTS POR 54348
Porter-Cable® 54348 Center Wheel Retaining Nut, For Use With 87615 and 87616 Double Insulated Disc Sander/Grinder
Porter-Cable WET/DRY VACUUM CLEANER FLAT FILTER POR 78115
Porter-Cable® 78115 Exhaust Vacuum Filter, 8-1/2 in L x 4-1/2 in W
Porter-Cable WET/DRY VACUUM CLEANER FILTERS POR 78114
Porter-Cable® 78114 2-Ply Vacuum Filter Bag, Paper, For Use With #7810 Vacuum
Porter-Cable WET/DRY VACUUM CLEANER ACCESSORYS POR 78110
This 6-piece set supplies tools and attachments to give you even more uses for your wet/dry vacuum. Designed for use with Porter-Cable® 7810 wet/dry vacuum, this assortment comes with two suction tubes, one bend tube, one universal brush, one universal floor tool and one crevice tool. Metal extensions ensure durability, while the variety of brushes and wands make it easier to vacuum your car, clean furniture, or remove dust from concrete, tile and wood floors.
Porter-Cable WAVY EDGE ROUTER BIT POR 43180
Porter-Cable® 43180 Router Bit, Wavy Edge Router, 1-1/4 in Dia Cutting, 2-9/32 in OAL, 1/4 in Dia Shank, Carbide
Recently Viewed
6-1/4-AMP CERAMIC FUSES -EDIMDA61/4 >
