DeWALT® Power-Stud® 7320 Wedge Expansion Anchor, 1/2 in Dia, 2-3/4 in OAL, 1-3/8 in L Thread, 304 Stainless Steel, Galvanized
The Power-Stud® anchor is a one piece fully threaded, wedge style anchor available in carbon steel and stainless steel. Threaded, rod hanger and tie wire versions are designed for use in solid concrete. The drill bit diameter needed for proper installation is the same as the anchor diameter.
-
BrandDeWALT®
-
UPC075352073200
-
Manufacturer Part Number7320
-
CountryUSA
-
FinishGalvanized
-
Thread Length1-3/8 in
-
Material304 Stainless Steel
-
Thread Size1/2-13
-
Thread TypeUNC
-
Minimum Embedment Depth2-1/4 in
-
Head TypeThreaded Stud
-
Diameter1/2 in
-
Drill Size1/2 in
-
Overall Length2-3/4 in
- Fully threaded, medium duty all-purpose anchor
- Length ID stamped on each threaded anchor
- Anchors can be installed through the fixture for hole spotting not required
- Chamfered impact section prevents damage to threads
- Clip design prevents spinning during installation
- Nominal drill bit diameter same as anchor diameter
- 7/16 in nut height
- 1-1/16 in OD washer
- 3/4 in wrench
- 60 ft-lbs tightening torque
- 9/16 in fixture clearance hole
-
UNSPSC31162102
-
IncludesNut and Washer
-
Package Description50/BX
-
Standards/ApprovalsFM J.I. OK3A9.AH|UL EX1289|ASTM E488|CID A-A-1923A
-
Specification Sheet
Recently Viewed
DeWALT® Power-Stud® 7320 Wedge Expansion Anchor, 1/2 in Dia, 2-3/4 in OAL, 1-3/8 in L Thread, 304 Stainless Steel, Galvanized
The Power-Stud® anchor is a one piece fully threaded, wedge style anchor available in carbon steel and stainless steel. Threaded, rod hanger and tie wire versions are designed for use in solid concrete. The drill bit diameter needed for proper installation is the same as the anchor diameter.
Proto® J280G Combination Slip Joint Plier, 2-3/8 in L x 1-7/16 in W x 15/32 in THK Forged Alloy Steel Jaw, Serrated Jaw Surface, 9-9/16 in OAL, No, ASME B107.23
Proto® J280G Combination Slip Joint Plier, 2-3/8 in L x 1-7/16 in W x 15/32 in THK Forged Alloy Steel Jaw, Serrated Jaw Surface, 9-9/16 in OAL, No, ASME B107.23
Browning® 767337 VPLE 100 Intermediate Duty Pillow Block Ball Bearing, 1-7/16 in Dia Bore, 4-9/16 to 5-7/16 in L Bolt Center-to-Center, 1-13/16 in Base to Bore Centerline, 6-3/4 in OAL x 3-5/8 in OAH
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric, or BOA concentric locking collar. The contact seal, with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction. Depending on your preference, these bearings are available in inch and metric bore with a wide variety of cast iron, stamped steel or rubber mount housings or specific industry solutions as illustrated on the pages to follow.
Browning® 767882 VPS 100 Intermediate Duty Pillow Block Ball Bearing, 1-11/16 in Dia Bore, 5-1/4 to 6-1/16 in L Bolt Center-to-Center, 2-1/8 in Base to Bore Centerline, 7-3/8 in OAL x 4-1/4 in OAH
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric, or BOA concentric locking collar. The contact seal, with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction. Depending on your preference, these bearings are available in inch and metric bore with a wide variety of cast iron, stamped steel or rubber mount housings or specific industry solutions as illustrated on the pages to follow.
Browning® 1064492 Multiple Sheave, 1/2 to 1-5/8 in QD® Bore, 3.35 in OD, 2 Grooves, 3.3 in Dia Pitch, 1-3/32 in W Face
Browning® offers an extensive multi groove sheave offering. This includes Browning® SPLIT TAPER® and QD® bushing designs. This means maximum economy and versatility for your application. Truly the right drive every time! Our exclusive B5V® sheaves have a patented design that offers 5 V hp in the economy of a B section sheave. B5V® sheaves serve 90% of all applications from 10 to 150 hp. This can reduce cost up to 40% over traditional designs.
Browning® 767459 VPS 200 Normal Duty Pillow Block Ball Bearing, 1-1/4 in Dia Bore, 4-5/8 to 5-3/8 in L Bolt Center-to-Center, 1-7/8 in Base to Bore Centerline, 6-3/4 in OAL x 3-11/16 in OAH
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric, or BOA concentric locking collar. The contact seal, with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction. Depending on your preference, these bearings are available in inch and metric bore with a wide variety of cast iron, stamped steel or rubber mount housings or specific industry solutions as illustrated on the pages to follow.
