POWERS #14-#16 X 1-1/2" PLASTIC ANCHORS PWR 7589
The bantam plug is a plastic anchor designed for use with lightweight fixtures. It can be used in concrete, block and brick. It is also suggested for use in wallboard. Holding values in wallboard tend to be inconsistent, other wall anchors may be considered depending on the application. The bantam plug anchor is injection molded from an engineered plastic and is designed to be used in conjunction with a sheet metal or wood screw. These fasteners are not recommended for use overhead or applications where holding values are critical.
-
BrandDeWALT®
-
UPC075352075891
-
Manufacturer Part Number07589-PWR
-
CountryUSA|Canada
-
Tensile Strength900 lb
-
MaterialEngineered Plastic
-
Thread TypeThreaded
-
Minimum Embedment Depth1-1/2 in
-
TypeLight Duty
-
Screw Size#14 to #16
-
SeriesBantam Plugâ„¢
-
Shear Strength575 lb
-
Drill Size5/16 in
-
Overall Length1-1/2 in
- Performs well in most base materials
- Anchor body is resistant to corrosion from moisture
- Ultimate load capacity: 840 lb tensile strength when embedded in 2000 psi, 840 lb tensile strength when embedded in 4000 psi and 900 lb tensile strength when embedded in 6000 psi compressive strength concrete
- Ultimate load capacity - 880 lb tensile load at 1500 psi and 175 lb shear load at 1500 psi solid and hollow clay brick masonry
| Competitor Name | Cross-Reference Number |
|---|---|
| Fastenal | 2141705 |
-
UNSPSC31162103
-
Package Description50/BX
-
Specification Sheet
Recently Viewed
The bantam plug is a plastic anchor designed for use with lightweight fixtures. It can be used in concrete, block and brick. It is also suggested for use in wallboard. Holding values in wallboard tend to be inconsistent, other wall anchors may be considered depending on the application. The bantam plug anchor is injection molded from an engineered plastic and is designed to be used in conjunction with a sheet metal or wood screw. These fasteners are not recommended for use overhead or applications where holding values are critical.
.866" X 1.850" X .276" OIL SEAL - TCM22X47X7TC>
.866" X 1.181" X .315" OIL SEAL - TCM22X30X8TC>
2.000" X 2.750" X .500" OIL SEALS-TCM20275SB >
12-OZ AEROSOL FOAMY LUBE-MISA00323 >
Threaded studs are available in 1/4-20 and 3/8-16 thread diameters with a variety of external thread and shank lengths for use in concrete, concrete over steel deck, concrete masonry walls and steel. They are used for applications where it may be desirable to remove the fixture or where shimming may be required or for suspending small diameter pipe (e.g. water lines, sprinkler systems). Knurled shank designs are available to increase performance in steel base materials. A plastic flute is mounted on the pin shank to retain the drive pin in the barrel of the tool providing guidance during the driving operation. Rod hangers and post nut hanger clips are available for suspending mechanical and electrical components from concrete and steel. They have an internally threaded clip or post nut designed to accept either 1/4-20 or 3/8-16 threaded rod. For the electrical trade, BX and EMT (electrical metallic tubing) conduit clips are provided in various sizes for attaching conduit to base materials where easy removal is not a requirement. Rebar basket clips are typically used in highway construction and paving applications to hold the support baskets for the reinforcing bars in place while the concrete is being poured.
