Stanley Black & Decker
POWERS 3/8" X 2-1/4" S/S CONCRETE ANCHORS PWR 7310
The Power-Stud® anchor, is a fully threaded, torque-controlled, wedge expansion anchor. It is available in a threaded version suitable for applications in solid concrete and grout-filled concrete masonry. The threaded version is produced in type 304 and type 316 stainless steel.
POWERS 3/8" X 2-1/2"MUSH/HD MASONRY SPIKE PWR 5548
The Spike® is a 1-piece, vibration-resistant anchor for use in concrete block or stone. Several head styles, including tamperproof versions and anchor materials are available. The Spike® anchor is formed with an "s" shaped configuration at the working end of the anchor to create an expansion mechanism. Since the anchor is pre-formed, there is no secondary tightening operation required which greatly reduces the overall cost of an anchor installation.
POWERS 3/8" X 2-1/2" WEDGE BOLT ANCHORS PWR 7222
The Screw-Bolt+â„¢ anchor is a one piece, heavy duty screw anchor with a finished hex head. It is simple to install, easy to identify and fully removable. The patented thread design, designed for use with standard ANSI drill bits, reduces installation torque and enhances productivity. The steel threads along the anchor body tap into the hole during installation to provide keyed engagement and allow for reduced edge and spacing distances. The Screw-Bolt+â„¢ finish is available in bright zinc plated and mechanically galvanized. Suitable base materials include normal weight concrete, sand lightweight concrete, concrete over steel deck, concrete masonry and solid clay brick.
POWERS 3/8" X 11" SPLINE ROTOHAMMER BITS PWR 1402
DeWALT® DW5701 2-Cutter Hammer Drill Bit, 3/8 in Drill Bit, 3/4 in Spline Shank, 8 in D Cutting, Carbide Cutting Edge, 13 in OAL
POWERS 3/8" X 1-3/4" WEDGE BOLT ANCHORS PWR 7220
The Screw-Bolt+â„¢ anchor is a one piece, heavy duty screw anchor with a finished hex head. It is simple to install, easy to identify and fully removable. The patented thread design, designed for use with standard ANSI drill bits, reduces installation torque and enhances productivity. The steel threads along the anchor body tap into the hole during installation to provide keyed engagement and allow for reduced edge and spacing distances. The Screw-Bolt+â„¢ finish is available in bright zinc plated and mechanically galvanized. Suitable base materials include normal weight concrete, sand lightweight concrete, concrete over steel deck, concrete masonry and solid clay brick.
POWERS 3/8" TO 1" WALL NYLON ZIP-ITS PWR 2345
The Zip-It® anchor is a one-piece self-drilling anchor designed for use in hollow gypsum wallboard for light duty loads. It is available in both engineered nylon and Zamac alloy for use with either a no. 6 or no. 8 screws in 3/8 in to 1 in wallboard. The Zip-It® Jr. Is formed from engineered nylon for use with no. 6 screws in 3/8 in to 5/8 in wallboard.
POWERS 3/8 X 3 ZINC F/H PHIL TAPPER SCREW PWR 5852
3/8 X 3 ZINC Flat Head Philips TAPPER SCREW
POWERS 3/4" X 8" WEDGE BOLT ANCHORS PWR 7288
The Screw-Bolt+â„¢ anchor is a one piece, heavy duty screw anchor with a finished hex head. It is simple to install, easy to identify and fully removable. The patented thread design, designed for use with standard ANSI drill bits, reduces installation torque and enhances productivity. The steel threads along the anchor body tap into the hole during installation to provide keyed engagement and allow for reduced edge and spacing distances. The Screw-Bolt+â„¢ finish is available in bright zinc plated and mechanically galvanized. Suitable base materials include normal weight concrete, sand lightweight concrete, concrete over steel deck, concrete masonry and solid clay brick.
POWERS 3/4" X 8-1/2" S/S CONCRETE ANCHORS PWR 7348
The Power-Stud® anchor, is a fully threaded, torque controlled, Wedge Expansion Anchor. It is available in a threaded version suitable for applications in solid concrete and grout-filled concrete masonry. The threaded version is produced in type 304 and type 316 stainless steel.
POWERS 3/4" X 8-1/2" CONCRETE ANCHORS PWR 7448
The Power-Stud®+ SD1 Anchor is a fully threaded, torque controlled, wedge expansion Anchor which is designed for consistent performance in cracked and uncracked concrete. Suitable base materials include normal weight concrete, sand lightweight concrete, concrete over steel deck and grouted concrete masonry. The Anchor is manufactured with a zinc plated carbon steel body and expansion clip for premium performance. Nut and washer are included.
POWERS 3/4" X 7" S/STEEL CONCRETE ANCHORS PWR 7346
The Power-Stud® anchor, is a fully threaded, torque controlled, Wedge Expansion Anchor. It is available in a threaded version suitable for applications in solid concrete and grout-filled concrete masonry. The threaded version is produced in type 304 and type 316 stainless steel.
POWERS 3/4" X 6" WEDGE BOLT ANCHORS PWR7286
The Screw-Bolt+â„¢ anchor is a one piece, heavy duty screw anchor with a finished hex head. It is simple to install, easy to identify and fully removable. The patented thread design, designed for use with standard ANSI drill bits, reduces installation torque and enhances productivity. The steel threads along the anchor body tap into the hole during installation to provide keyed engagement and allow for reduced edge and spacing distances. The Screw-Bolt+â„¢ finish is available in bright zinc plated and mechanically galvanized. Suitable base materials include normal weight concrete, sand lightweight concrete, concrete over steel deck, concrete masonry and solid clay brick.
POWERS 3/4" X 6-1/4" S/S CONCRETE ANCHORS PWR 7344
The Power-Stud® anchor, is a fully threaded, torque controlled, Wedge Expansion Anchor. It is available in a threaded version suitable for applications in solid concrete and grout-filled concrete masonry. The threaded version is produced in type 304 and type 316 stainless steel.
POWERS 3/4" X 6-1/4" CONCRETE ANCHORS PWR 7444
The Power-Stud®+ SD1 Anchor is a fully threaded, torque controlled, wedge expansion Anchor which is designed for consistent performance in cracked and uncracked concrete. Suitable base materials include normal weight concrete, sand lightweight concrete, concrete over steel deck and grouted concrete masonry. The Anchor is manufactured with a zinc plated carbon steel body and expansion clip for premium performance. Nut and washer are included.
POWERS 3/4" X 5" WEDGE BOLT ANCHORS PWR 7284
The Screw-Bolt+â„¢ anchor is a one-piece, heavy duty Screw Anchor with a finished hex head or flat head (countersunk). It is simple to install, easy to identify and fully removable. The patented thread design, designed for use with standard ANSI drill bits, reduces installation torque and enhances productivity. The steel threads along the anchor body tap into the hole during installation to provide keyed engagement and allow for reduced edge and spacing distances. The Screw-Bolt+â„¢ is available as bright zinc-plated or mechanically galvanized plating. Suitable base materials include normal-weight concrete.
POWERS 3/4" X 5-1/2" S/S CONCRETE ANCHORS PWR 7342
The Power-Stud® anchor is a one piece fully threaded, wedge style anchor available in carbon steel and stainless steel. Threaded, rod hanger and tie wire versions are designed for use in solid concrete. The drill bit diameter needed for proper installation is the same as the anchor diameter.
POWERS 3/4" X 5-1/2" CONCRETE ANCHORS PWR 7442
The Power-Stud anchor is a fully threaded, torque-controlled, wedge expansion anchor. It is available in threaded, rod hanger and tie-wire versions suitable for applications in solid concrete and grout filled concrete masonry. The carbon steel threaded version is suitable for a variety of applications. The drill bit diameter necessary for proper installation is the same as the anchor diameter.
POWERS 3/4" X 4-3/4" CONCRETE ANCHORS PWR 7441
The Power-Stud®+ SD1 Anchor is a fully threaded, torque controlled, wedge expansion Anchor which is designed for consistent performance in cracked and uncracked concrete. Suitable base materials include normal weight concrete, sand lightweight concrete, concrete over steel deck and grouted concrete masonry. The Anchor is manufactured with a zinc plated carbon steel body and expansion clip for premium performance. Nut and washer are included.
POWERS 3/4" X 4-1/4" S/S CONCRETE ANCHORS PWR 7340
The Power-Stud® anchor is a one piece fully threaded, wedge style anchor available in carbon steel and stainless steel. Threaded, rod hanger and tie wire versions are designed for use in solid concrete. The drill bit diameter needed for proper installation is the same as the anchor diameter.
POWERS 3/4" X 3" WEDGE BOLT ANCHORS PWR7280
The Screw-Boltâ„¢ anchor is a 1-piece, heavy duty Screw Anchor with a finished hex head or flat head (countersunk). It is simple to install, easy to identify and fully removable. The patented thread design, designed for use with standard ANSI drill bits, reduces installation torque and enhances productivity. The steel threads along the anchor body tap into the hole during installation to provide keyed engagement and allow for reduced edge and spacing distances. The Screw-Boltâ„¢ is available as bright zinc plated or mechanically galvanized plating. Suitable base materials include normal weight concrete.
POWERS 3/4" X 12" ZINC CONCRETE ANCHORS PWR 7451
The Power-Stud anchor is a fully threaded, torque-controlled, wedge expansion anchor. It is available in threaded, rod hanger and tie-wire versions suitable for applications in solid concrete and grout filled concrete masonry. The carbon steel threaded version is suitable for a variety of applications. The drill bit diameter necessary for proper installation is the same as the anchor diameter.
POWERS 3/4" X 10" ZINC CONCRETE ANCHORS PWR 7449
The Power-Stud®+ SD1 Anchor is a fully threaded, torque controlled, wedge expansion Anchor which is designed for consistent performance in cracked and uncracked concrete. Suitable base materials include normal weight concrete, sand lightweight concrete, concrete over steel deck and grouted concrete masonry. The Anchor is manufactured with a zinc plated carbon steel body and expansion clip for premium performance. Nut and washer are included.
POWERS 3/4" X 10" S/STEEL CONCRETE ANCHOR PWR 7349
The Power-Stud® anchor, is a fully threaded, torque controlled, Wedge Expansion Anchor. It is available in a threaded version suitable for applications in solid concrete and grout-filled concrete masonry. The threaded version is produced in type 304 and type 316 stainless steel.
POWERS 3/4" Steel Drop-in Anchors PWR06332
The steel Drop-inâ„¢ is an all steel, machine bolt anchor available in carbon steel and two types of stainless steel. It can be used in solid concrete, hard stone and solid block base materials. A coil thread version for forming applications is also available.
Recently Viewed
6-MM X 1.00 ZINC SQUARE NUTS-MET937006 >
1/4" PRESSURE REGULATOR-PORD27255 >
6-1/4-AMP CERAMIC FUSES -EDIMDA61/4 >
