Southwire Company

Garvin Industries flat four hole corner plates are manufactured with four 9/16 in holes and have a 1/4 in THK zinc plated steel finish.

Garvin Industries flat four hole tee plates are manufactured with four 9/16 in holes and have a 1/4 in THK zinc plated steel finish.

Garvin Industries four hole single channel Post Bases are manufactured using zinc plated steel, have a 6 in by 6 in base, are 1/4 in THK and have (4) mounting holes.

Two-piece strut clamps are used to mount 1-1/2 in rigid conduits from strut channel. Garvin Industries two-piece construction provides a tight fit in strut. Additionally, their screw tight clamping action secures conduit in overhead strut channel or wall mount applications. stainless steel construction prevents corrosion and rust when used in damp locations.

Two-piece strut clamps are used to mount 1/2 in rigid conduits from strut channel. Garvin Industries two-piece construction provides a tight fit in strut. Additionally, their screw tight clamping action secures conduit in overhead strut channel or wall mount applications. stainless steel construction prevents corrosion and rust when used in damp locations.

Ultratite® type NM is manufactured with rigid polyvinyl chloride reinforcement imbedded within a flexible polyvinyl chloride wall. The construction provides excellent impact and crush strength while remaining highly flexible. The conduit resists oils, mild acids and exposure to sunlight.

Ultratite Liquidtight Flexible Metal Conduit is suitable for the installation and protection of electrical conductors in circuits of 600 Volts nominal, or less. Also used in industrial and commercial applications for conveyors, blowers, cranes, air conditioners, machine tooling and lubrication equipment. It can be used in conditions of installation, operation, or maintenance require flexibility or protection from liquids, vapors, solids, or weather. Applications requiring movement, crossover connections, or tight bends.

Southwire® Ultratite® 55094601 Type NM Liquid Tight Flexible Non-Metallic Conduit, 1-1/2 in Trade, 1.575 to 1.6 in ID x 1.883 in OD, 50 ft L, PVC

Ultratite Liquidtight Flexible Metal Conduit is suitable for the installation and protection of electrical conductors in circuits of 600 Volts nominal, or less. Also used in industrial and commercial applications for conveyors, blowers, cranes, air conditioners, machine tooling and lubrication equipment. It can be used in conditions of installation, operation, or maintenance require flexibility or protection from liquids, vapors, solids, or weather. Applications requiring movement, crossover connections, or tight bends.

Ultratite Liquidtight Flexible Nonmetallic Conduit is used for the installation and protection of electrical conductors. It protects the conductors where the conditions of installation, operation or maintenance require flexibility or protection from liquids, vapors, solids or weather. It is suitable for use in exposed or concealed installations and can be used for direct burial and encased in concrete.

Titan® type EF is manufactured with a spiral wound interlocked strip of corrosion resistant, galvanized steel. Titan® type EF is manufactured with a spiral wound interlocked strip of steel. Titan® type AEF is manufactured with a spiral wound interlocked strip of aluminum. A flame retardant, flexible PVC jacket is extruded over the metal cores. The gray jacket resists oils, mild acids and exposure to sunlight. Black available but subject to economic order quantity.

The Southwire Company LiquidTite 1 in. x 100 ft. Non-Metallic Conduit is a flexible housing for electrical wire the provides impact protection in encased concrete or direct burial installations. This conduit is UL listed, CSA certified, green Spec and RoHS compliant. It helps protects electrical cables in burial and concrete applications.

Titan2™ 55093801 Type EF General Purpose Liquid Tight Flexible Metal Conduit, 1/2 in Trade, 0.622 to 0.642 in ID x 0.844 in OD, 100 ft Coil L, Steel

Ultratite® type NM is manufactured with rigid polyvinyl chloride reinforcement imbedded within a flexible polyvinyl chloride wall. The construction provides excellent impact and crush strength while remaining highly flexible. The conduit resists oils, mild acids and exposure to sunlight.

Titan® type EF is manufactured with a spiral wound interlocked strip of corrosion resistant, galvanized steel. Titan® type EF is manufactured with a spiral wound interlocked strip of steel. Titan® type AEF is manufactured with a spiral wound interlocked strip of aluminum. A flame retardant, flexible PVC jacket is extruded over the metal cores. The gray jacket resists oils, mild acids and exposure to sunlight. Black available but subject to economic order quantity.

Ultratite Liquidtight Flexible Nonmetallic Conduit is suitable for the installation and protection of electrical conductors in circuits of 600 Volts nominal, or less. It may be used for Motor circuits - for conductors of motor feeders, branch and control circuits. Where the conditions of installation, operation, or maintenance require flexibility or protection from liquids, vapors, solids, or weather. It may also be used in agricultural buildings under exposed or concealed installations.

Titan® type EF is manufactured with a spiral wound interlocked strip of corrosion resistant, galvanized steel. Titan® type EF is manufactured with a spiral wound interlocked strip of steel. Titan® type AEF is manufactured with a spiral wound interlocked strip of aluminum. A flame retardant, flexible PVC jacket is extruded over the metal cores. The gray jacket resists oils, mild acids and exposure to sunlight. Black available but subject to economic order quantity.

With a wide range of sizes and styles, Madison has the flex and liquidtight conduit that you need. From trade sizes ranging from 3/8 to 4 in, no job is too big or too small. Made from the highest quality steel, aluminum and PVC, Madison's flex and liquidtight conduit come through each and every time.

Often referred to as utility boxes, Southwire - Topaz drawn handy boxes are used for switch boxes and are a great option for with machinery and appliances. Available in multiple KO sizes with or without concentric KOs and raised ground emboss with installed 10/32 grounding screw where noted. cULus listed and RoHS compliant.

Southwire® Romex® Brand SIMpull® NM-B (nonmetallic-sheathed) cable may be used for both exposed and concealed work in normally dry locations at temperatures not to exceed 90C (with ampacity limited to that for 60C conductors) as specified in the National Electrical Code. NM-B cable is primarily used in residential wiring as branch circuits for outlets, switches, and other loads. NM-B cable may be run in air voids of masonry block or tile walls where such walls are not wet or damp locations. Voltage rating for NM-B cable is 600 volts.

Marketed under the SIGNAL® brand name, Coleman Cable manufacturers one of the most comprehensive security, home technology and datacom cable packages available today. Our product offering provides cable solutions for virtually every security and home technology application. Coleman Cable technical expertise and commitment to innovation ensure the most advanced and highest quality security, home technology and datacom cable in the market.

Southwire - Topaz 4 in octagon blank flat covers are used to cover 4 in octagon box wiring and provide a means for access when future conduit runs are required. cULus listed and RoHS compliant.

Topaz carries a complete line of Weatherproof Covers in a variety of designs to suit multiple applications. All models install cleanly and feature large cord openings for ease of use. Our Single Gang Duplex Horizontal Cover is fabricated from strong, durable and lightweight copper free aluminum and features an aluminum cast cover with spring loaded lid for easy accessibility.All models include gasket, mounting hardware and instructions; available in gray, white and bronze. UL listed, 2011 NEC and NEMA 3R compliant. Point of purchase packaging promotes self merchandising and easy display.

Southwire's Bare Copper is used for residential electrical systems before entering the home, usually at the meter base. It is also used as a residential grounding wire. Solid and stranded bare copper (Classes AA and A) are used for overhead transmission and distribution applications. Solid bare copper (Classes B and C) are used for non-insulated hook-ups, jumpers and electrical construction.