Southwire Company
ELECTROLINE 3-1/2" RIDGID CONDUIT COUPLINGS ELE TRC-3-1/2
Topaz's Rigid Couplings feature a tubular threaded type assembly and ensure proper alignment and a secure connection when joining two ends of threaded Rigid conduit. Other applications include bonding threaded conduits to electrical junction boxes or enclosures when used in conjunction with chase nipples and connectors. Constructed of strong galvanized steel for low conductivity and high corrosion resistance. Available in 1/2” to 6” sizes with NPSM threads. UL listed; Meets Federal specification WW-C-563.
ELECTROLINE 3" 45-DEG RIGID CONDUIT ELBOWS ELE TRE-3 X 45
Topaz's Rigid 45° elbow is precision manufactured to deliver optimum safety and performance. Fabricated from galvanized steel for low conductivity and high corrosion resistance, all surfaces, both interior and exterior are defect free to ensure a secure connection to Rigid conduit and to preserve longevity. Available in sizes from 1/2” to 6”; UL listed, HDG, meets Federal specification WW-C-563.
ELECTROLINE 3" 90-DEGREE RIGID CONDUIT ELBOWS ELE TRE-3
Topaz's Rigid 90° elbow is precision manufactured to deliver optimum safety and performance. Fabricated from galvanized steel for low conductivity and high corrosion resistance, all surfaces, both interior and exterior are defect free to ensure a secure connection to Rigid conduit and to preserve longevity. Available in sizes from 1/2” to 6”; UL listed, HDG, meets Federal specification WW-C-563.
ELECTROLINE 3" RIDGID CONDUIT GALV/COUPLINGS ELE TRC-3
Topaz's Rigid Couplings feature a tubular threaded type assembly and ensure proper alignment and a secure connection when joining two ends of threaded Rigid conduit. Other applications include bonding threaded conduits to electrical junction boxes or enclosures when used in conjunction with chase nipples and connectors. Constructed of strong galvanized steel for low conductivity and high corrosion resistance. Available in 1/2” to 6” sizes with NPSM threads. UL listed; Meets Federal specification WW-C-563.
ELECTROLINE 3" RIDGID CONDUIT STRAPS ELE L-607-T
Snap-On EMT/Rigid Strap, 3 in Conduit, Steel
ELECTROLINE 3/4" 90-DEGREE EMT CONDUIT ELBOWS ELE TTE-3/4
Topaz's EMT 90° elbow is precision manufactured to deliver optimum safety and performance. Fabricated from galvanized steel for low conductivity and high corrosion resistance, all surfaces, both interior and exterior are free from defect to ensure a secure connection to EMT conduit and to preserve integrity and longevity. Available in sizes from 1/2” to 4”; cULus approved, meets Federal specification WW-C-563.
ELECTROLINE 3/4" RIDGID CONDUIT GALV/COUPLINGS ELE TRC-3/4
Topaz's Rigid Couplings feature a tubular threaded type assembly and ensure proper alignment and a secure connection when joining two ends of threaded Rigid conduit. Other applications include bonding threaded conduits to electrical junction boxes or enclosures when used in conjunction with chase nipples and connectors. Constructed of strong galvanized steel for low conductivity and high corrosion resistance. Available in 1/2” to 6” sizes with NPSM threads. UL listed; Meets Federal specification WW-C-563.
ELECTROLINE 3/4" TWO-HOLE RIDGID CONDUIT STRAP ELE L-620-2
Southwire® Madison Electric 125 Snap-On Rigid Strap, 3/4 in Conduit, Steel
ELECTROLINE 3/4" UNILET STEEL COVERS ELE L-103-2
Topaz's Steel Conduit Body Covers feature strong zinc plated steel construction and are interchangeable with other major brands, reducing overhead and stocking costs. Domed covers allows for additional wiring space.Sold complete with screws and available in a range of sizes from 1/2” to 3 1/2-4”. Built to last construction ensures integrity and optimizes safety and performance; UL listed.
ELECTROLINE 3/4"-MPT ELECTRICAL CHASE NIPPLES ELE L-702
Quality is built into everything we do. Our line of nipples, elbows and couplings is no exception. With our wide variety, whatever your needs, we've got you covered.
ELECTROLINE 3/4"-MPT X 1/2"-FPT ELEC/BUSHINGS ELE L-RB-2
REDUCING BUSHINGSTopaz's line of Reducing Bushings reduce the size conduit hubs; smooth and rounded integral bushing offers conductor protection. Fabricated from strong and long lasting steel or high grade malleable iron. Steel sizes from 1/2” by 3/8” to 2” by 1 1/2”; malleable iron available in sizes from 2 1/2” by 1” to 4” by 3 1/2”.
ELECTROLINE 3/8" TO 1/2" ROMEX CLAMP CONNECTOR ELE L-51
Topaz's 3/8” NM Clamp Connectors are designed for use in dry locations to bond nonmetallic sheathed cable to boxes or enclosures. Naturally corrosion resistant zinc die cast construction with two screw assembly to assure a secure connection. Long lasting and dependable fabrication; 1/2” size for cable from 2 # 14-2 with ground and 2 # 12-2 with ground. UL listed.
ELECTROLINE 3/8"-16 MALLEABLE BEAM C-CLAMPS ELE L-288
Tapped Beam Clamp, 2 in Conduit, 100 lb Load, Malleable Iron, Zinc Plated
ELECTROLINE 4"-FPT RIDGID CONDUIT COUPLINGS ELE TRC-4
Topaz's Rigid Couplings feature a tubular threaded type assembly and ensure proper alignment and a secure connection when joining two ends of threaded Rigid conduit. Other applications include bonding threaded conduits to electrical junction boxes or enclosures when used in conjunction with chase nipples and connectors. Constructed of strong galvanized steel for low conductivity and high corrosion resistance. Available in 1/2” to 6” sizes with NPSM threads. UL listed; Meets Federal specification WW-C-563.
ELECTROLINE ROMEX CABLE STAPLES--BX/500 ELE ST-10-5
ROMEX CABLE STAPLES--BX/500
GARVIN® 52C1 Blank Cover, 4 in L x 4 in W, Flat Cover, Steel
4 in square blank flat covers are used to cover 4 in square box wiring and provide a means for access when future conduit runs are required.
GARVIN® 54C6 Cover, 4 in L x 4 in W, Flat Cover, Cold Rolled Steel
4 in octagon box covers with (1) 1/2 in conduit knockouts are used to cover existing wires in octagon boxes while allowing the installation of a single 1/2 in conduit. Garvin Industries flat covers provide a quick and easy way to cover or terminate exposed electrical wire.
GARVIN® G1938 Cover, 4 in L x 4 in W, Duplex Receptacle Cover, Steel
4 in square, 1/2 in raised, duplex receptacle industrial surface covers are used to attach a duplex receptacle device directly onto 4 in square boxes in a industrial setting. Garvin Industries 4 in square industrial surface covers allow for a quick installation of duplex devices to steel covers before they are mounted to the box.
GARVIN® LB150 LB-Style Conduit Body With Unit Cover and Neoprene Gasket, 1-1/2 in Hub, Die Cast Aluminum, Powder Coated
1-1/2 in LB-style conduit bodies are attached to 1-1/2 in threaded rigid or IMC conduits when a change of direction is required. Their removable cover makes general maintece and wire pulling and feed through easy and convenient. Commonly used for electrical service entrance wires or as an economical convenience box when extra wire capacity is needed. Garvin Industries LB-style conduit bodies save time and money by eliminating costly bending of large conduits in order to change the directions of conduit runs. They allow the installer to easily bend wires into the smooth turns. Their powder coated finish and watertight gasket ensure a weatherproof installation.
GARVIN® LB200 LB-Style Conduit Body With Unit Cover and Neoprene Gasket, 2 in Hub, Die Cast Aluminum, Powder Coated
2 in LB-style conduit bodies are attached to 2 in threaded rigid or IMC conduits when a change of direction is required. Their removable cover makes general maintece and wire pulling and feed through easy and convenient. Commonly used for electrical service entrance wires or as an economical convenience box when extra wire capacity is needed. Garvin Industries LB-style conduit bodies save time and money by eliminating costly bending of large conduits in order to change the directions of conduit runs. They allow the installer to easily bend wires into the smooth turns. Their powder coated finish and watertight gasket ensure a weatherproof installation.
GARVIN® LC50 C-Style Conduit Body With Unit Cover and Neoprene Gasket, 1/2 in Hub, Die Cast Aluminum, Powder Coated
1/2 in C-style conduit bodies are attached to 1/2 in threaded rigid or IMC conduits when a change of direction is required. Their removable cover makes general maintece and wire pulling and feed through easy and convenient. Commonly used for electrical service entrance wires or as an economical convenience box when extra wire capacity is needed. Garvin Industries C-style conduit bodies save time and money by eliminating costly bending of large conduits in order to change the directions of conduit runs. They allow the installer to easily bend wires into the smooth turns. Their powder coated finish and watertight gasket ensure a weatherproof installation. This item has a 2 hr fire rating.
GARVIN® LL75 LL-Style Conduit Body With Unit Cover and Neoprene Gasket, 3/4 in Hub, Die Cast Aluminum, Powder Coated
3/4 in LL-style conduit bodies are attached to 3/4 in threaded rigid or IMC conduits when a change of direction is required. Their removable cover makes general maintece and wire pulling and feed through easy and convenient. Commonly used for electrical service entrance wires or as an economical convenience box when extra wire capacity is needed. Garvin Industries LL-style conduit bodies save time and money by eliminating costly bending of large conduits in order to change the directions of conduit runs. They allow the installer to easily bend wires into the smooth turns. Their powder coated finish and watertight gasket ensure a weatherproof installation. This item has a 2 hr fire rating.
GARVIN® LT100 T-Style Conduit Body With Unit Cover and Neoprene Gasket, 1 in Hub, Die Cast Aluminum, Powder Coated
1 in T-style conduit bodies are attached to 1 in threaded rigid or IMC conduits when a change of direction is required. Their removable cover makes general maintece and wire pulling and feed through easy and convenient. Commonly used for electrical service entrance wires or as an economical convenience box when extra wire capacity is needed. Garvin Industries T-style conduit bodies save time and money by eliminating costly bending of large conduits in order to change the directions of conduit runs. They allow the installer to easily bend wires into the smooth turns. Their powder coated finish and watertight gasket ensure a weatherproof installation. This item has a 2 hr fire rating.
GARVIN® LT75 T-Style Conduit Body With Unit Cover and Neoprene Gasket, 3/4 in Hub, Die Cast Aluminum, Powder Coated
3/4 in T-style conduit bodies are attached to 3/4 in threaded rigid or IMC conduits when a change of direction is required. Their removable cover makes general maintece and wire pulling and feed through easy and convenient. Commonly used for electrical service entrance wires or as an economical convenience box when extra wire capacity is needed. Garvin Industries T-style conduit bodies save time and money by eliminating costly bending of large conduits in order to change the directions of conduit runs. They allow the installer to easily bend wires into the smooth turns. Their powder coated finish and watertight gasket ensure a weatherproof installation. This item has a 2 hr fire rating.
Recently Viewed
15-MM X 1.00 BEARING LOCKNUT - SNRKM2>
DRAWN CUP CLUTCH NEEDLE ROLLER BEARING - GULRC162110>
1.125" -SQUARE BORE AGRICULTURAL BEARING-IBIW208PP5 >
1.5355" -ROUND BORE AGRICULTURAL BEARING-IBIGW209PPB4 >
10-AMP FUSE (V-314-010)
GP® 3034M Standard Length Socket, 3/4 in, 34 mm Hex Socket, 6 Points
