ECM Industries

Gardner Bender switches are available in many different styles and sizes. They are used in countless applications, from basic ON-OFF to multi-function applications. Most of our electrical switches are suitable for marine, industrial or automotive applications. They are available in a variety of characteristics including actuator type, handle shape, body construction and size, terminal type, voltage rating, sealing properties and illumination. Gardner Bender switches are leading the industry in quality and durability.

Gardner Bender switches are available in many different styles and sizes. They are used in countless applications, from basic on-off to multifunction applications. Most of our electrical switches are suitable for marine, industrial or automotive applications. They are available in a variety of characteristics including actuator type, handle shape, body construction and size, terminal type, voltage rating, sealing properties and illumination. Gardner Bender switches are leading the industry in quality and durability.

The 10 A pushbutton door switch features normally on-momentary contact. The switch includes a metal box, cover plate and mounting hardware for installation within a doorjamb with a 1-1/4 in wide x 2-3/4 in high x 2 in deep mounting hole. The single-pole, single throw circuitry automatically operates lights when door is opened.

Gardner Bender GTA-2/0 Mechanical Terminal Lug, 14 to 2/0 AWG Aluminum/Copper Conductor, 1/4 in Stud, Aluminum

Gardner Bender GTA-2N Mechanical Terminal Lug, 14 to 2 AWG, 1/4 in Stud, Aluminum

Gardner Bender GTF-600N Friction Tape, 60 ft L x 3/4 in W, 15 mil THK, PVC, Black

A non-contact voltage tester serves as a key component in any electrical toolkit, allowing the user to verify the presence of AC voltage prior to working on an electrical installation or during troubleshooting without requiring physical contact with live electrical conductors. The Gardner Bender GVD-3504 Circuit Alert non-contact voltage tester features both audible (beeping) and visual (360 degree flashing red light) indicators to alert the user of the presence of AC voltage from 50V to 600V. Use to locate breaks in wires and voltage at outlets, circuit breaker panels, light fixtures, switches, and motors. Quickly locates the hot terminals in receptacles. Fully insulated probe tip eliminates the risk of contacting live electrical wires. Built in patented safe test feature ensures tester and batteries are working properly. The unit includes a pocket-clip for secure portability. Requires one (1) AAA Battery (not included). Tester is C/ETL/UL Listed, offers a 150lb crush rating, CAT III 600V rating, and includes a 1 year warranty.

Solenoid voltage tester tests AC/DC voltage from 120 to 480 V and DC Polarity. Offers dual voltage indication with a solenoid vibration and visual neon light bulb. Vibration indicates voltage while neon light indicates DC polarity. Built-in slots in probe housing hold probes for one hand testing and storage. 4 ft reach from probe to probe with probes unlocked. High impact, dual insulated, case stands up to rugged service. Testing applications include outlets, panels, light fixtures, switches, circuit breakers and extension cords.

These multi-range hex head connectors cover 95 percent of everyday applications making them the simple choice for all of your wire connection needs. Don't worry about using a hex tool to install you can't over-torque this connector because its patented hex head design strips out at UL torque saving the wires and your fingers. Inside the connector a zinc plated square wire spring ensures a secure connection that resists corrosion. The thermoplastic shell is designed for long-lasting strength and resists chemicals while the deep skirt supports smooth wire entry and coverage of stripped wires. Use for: large appliances, Timers, indoor lighting, Switches, Ballasts, junction Box, air conditioners

Thin wall heat-shrink tubing is constructed from durable, flame-retardant black polyolefin which is resistant to both solvents and fluids making it ideal for cable insulation, repair, marking or bundling. Heat shrink not only provides superior mechanical, abrasion and moisture protection but also strengthens connections and provides a comfortable gripping surface. As a result, professional and DIY multi-purpose uses include repairing cords (ranging from large appliance cords to small electronic cables that show wear at pull-out), covering tool and sporting equipment handles, and sealing rope for neat, unravel resistant ends. Finally, tubing capably resists common fluids and solvents. Upon heating to 120 deg C (250 deg F) the tubing begins to shrink but will not drip, crack or flow and is self-extinguishing within 30 seconds. Meets UL 224, 125 deg C: CSA C22.2 No3 198.1, 125 deg C; MIL-DTL-23053/5, Class 1 and 2, AMS 3636 and 3637, DEF STAN 59-79, Issue 3 Type 2a. Continuous operating temperature: -55 deg C (-67 deg F) to 135 deg C (275 deg F). Shrink temperature: 120 deg C (250 deg F) to 250 deg C (480 deg F). 600 V/Mil Dielectric strength.

Dependable and easy to use, Gardner Bender terminals (and wiring accessories) offer the high quality and application flexibility that professionals demand. Available in a variety of packaging options, look to Gardner Bender for secure wire connection options. The underground UF splice kit accommodates waterproof splicing of 14 to 8 AWG UF copper wire.

The Gardner Bender 3/16 in heat shrink tubing (8-Pack) provides abrasion and moisture protection for electrical wire and cable. This tubing is constructed of flame-retardant polyolefin.

Thin wall heat-shrink tubing is constructed from durable, flame-retardant black polyolefin which is resistant to both solvents and fluids making it ideal for cable insulation, repair, marking or bundling. Heat shrink not only provides superior mechanical, abrasion and moisture protection but also strengthens connections and provides a comfortable gripping surface. As a result, professional and DIY multi-purpose uses include repairing cords (ranging from large appliance cords to small electronic cables that show wear at pull-out), covering tool and sporting equipment handles, and sealing rope for neat, unravel resistant ends. Finally, tubing capably resists common fluids and solvents. Upon heating to 120 deg C (250 deg F) the tubing begins to shrink but will not drip, crack or flow and is self-extinguishing within 30 seconds. Meets UL 224, 125 deg C: CSA C22.2 No3 198.1, 125 deg C; MIL-DTL-23053/5, Class 1 and 2, AMS 3636 and 3637, DEF STAN 59-79, Issue 3 Type 2a. Continuous operating temperature: -55 deg C (-67 deg F) to 135 deg C (275 deg F). Shrink temperature: 120 deg C (250 deg F) to 250 deg C (480 deg F). 600 V/Mil Dielectric strength.

The Gardner Bender 3/8 in heat shrink tubing (3-Pack) provides abrasion and moisture protection for electrical wire and cable. This tubing is constructed of flame-retardant polyolefin.

The Gardner Bender 1/2 in heat shrink tubing (3-Pack) provides abrasion and moisture protection for electrical wire and cable. This tubing is constructed of flame-retardant polyolefin.

The Gardner Bender 3/4 in heat shrink tubing (2-Pack) provides abrasion and moisture protection for electrical wire and cable. This tubing is constructed of flame-retardant polyolefin.

The Gardner Bender eight- piece Heat Shrink Tubing Assortment is ideal for insulating electrical wire, repairing appliance cords and covering tool handles. This tubing comes in 4 in lengths and offers resistance to moisture, solvent and flame damage.

This rubber based brush-on liquid tape forms a protective, waterproof, UV-resistant, dielectric seal around spliced electrical wire to protect against corrosion, shortages, electrical shock and vibration. The quick-drying fluid cures in 24 hours and will not deteriorate or unravel like traditional tape. Resistant to chemicals, solvents, saltwater and other common fluids, to achieve connections that last for decades. To apply, shake well then use brush built into the cap to liberally brush the liquid over the splice/connection. Allow to dry for 5 minutes and then re-apply if a thicker application is needed. Ideal for both indoor and outdoor use and under extreme environments including automotive, marine, farm/ag and RV.

This rubber based brush-on liquid tape forms a protective, waterproof, UV-resistant, dielectric seal around spliced electrical wire to protect against corrosion, shortages, electrical shock and vibration. The quick drying fluid cures in 24 hours and will not deterioriate or unravel like traditional tape. Resistant to chemicals, solvents, saltwater and other common fluids, to achieve connections that last for decades. To apply, shake well then use brush built into the cap to liberally brush the liquid over the splice/connection. Allow to dry for 5 minutes and then re-apply if a thicker application is needed. Ideal for both indoor and outdoor use and under extreme environments including automotive, marine, farm/ag and RV. 4 oz bottle temp range: -30 to 200 degrees F and -34 to 93 degrees C.

This rubber based brush-on liquid tape forms a protective, waterproof, UV-resistant, dielectric seal around spliced electrical wire to protect against corrosion, shortages, electrical shock and vibration. The quick drying fluid cures in 24 hours and will not deterioriate or unravel like traditional tape. Resistant to chemicals, solvents, saltwater and other common fluids, to achieve connections that last for decades. To apply, shake well then use brush built into the cap to liberally brush the liquid over the splice/connection. Allow to dry for 5 minutes and then re-apply if a thicker application is needed. Ideal for both indoor and outdoor use and under extreme environments including automotive, marine, farm/ag and RV. 4 oz bottle temp range: -30 to 200 degrees F and -34 to 93 degrees C.

When wires become entangled they are safety hazards, for both the equipment and the owner. Gardner Bender offers a variety of products for protection and neatness. As the needs of professional electricians change in managing wire and cable, Gardner Bender continues to deliver innovative solutions. The Gardner Bender 4 oz. White liquid electrical tape is a liquid coating that is used to insulate and protect electrical splices and connections. The waterproof formula resists damage caused by chemicals and UV rays. Fast drying formula.

The Gardner Bender 1-1/4 in x 1/2 in Graphite Metallic Steel Staples for NM Cables are designed to secure 14/2, 12/2 and 10/2 NM cables. These straight-driving, burr free, steel staples feature sharper tips so the legs drive in straight without splitting wood and have recessed heads to protect cable jackets. Virtually oil-free for cleaner handling and engineered to contractor preferred length. Designed to be driven into wood with a hammer. Made in the USA.

These 1-1/4 in x 9/16 in graphite metallic steel staples are designed to secure 14/3, 12/3 and 10/3 NM cables. These strong steel staples feature burr free, sharper tips so the legs drive in straight without splitting wood and are engineered with recessed heads to protect cable jackets. Virtually oil free for cleaner handling and manufactured to contractor preferred length. Designed to be driven into wood with a hammer.

The Gardner Bender 1/2 in blue plastic metal insulated staples for 14/2 and 12/2 cable (100/PK) fasten electrical cable to wood surfaces. These staples offer a plastic sheath to prevent arc faults if the staple is over-driven through a cable jacket.