Gardner Bender MS-175 Recessed Head Contractor Length Metal Staple, 1-1/4 in L Leg, 14 AWG, 12 AWG, 10 AWG Cable, Steel
These 1-1/4 in x 9/16 in graphite metallic steel staples are designed to secure 14/3, 12/3 and 10/3 NM cables. These strong steel staples feature burr free, sharper tips so the legs drive in straight without splitting wood and are engineered with recessed heads to protect cable jackets. Virtually oil free for cleaner handling and manufactured to contractor preferred length. Designed to be driven into wood with a hammer.
-
BrandGardner Bender
-
UPC032076651756
-
Manufacturer Part NumberMS-175
-
CountryUSA|Canada
-
Cable Size14 AWG, 12 AWG, 10 AWG
-
Cable TypeNon-Metallic
-
Point TypeSharp
-
MaterialSteel
-
ColorGraphite Metallic
-
TypeRecessed Head Contractor Length
-
Number of Wires3
-
Leg Length1-1/4 in
- Recessed head drives quickly and protects cable insulation
- Virtually oil-free for clean handling
- Drive in with a hammer
- Contractor preferred length
- Metal construction with a graphite metallic finish
- Made from steel for strength
- Made in the USA
| Cross-Reference Number |
|---|
| 500791 |
-
UNSPSC31162404
-
Standards/ApprovalsRoHS Compliant
-
Warranty1 Year
-
Specification Sheet
Recently Viewed
Gardner Bender MS-175 Recessed Head Contractor Length Metal Staple, 1-1/4 in L Leg, 14 AWG, 12 AWG, 10 AWG Cable, Steel
These 1-1/4 in x 9/16 in graphite metallic steel staples are designed to secure 14/3, 12/3 and 10/3 NM cables. These strong steel staples feature burr free, sharper tips so the legs drive in straight without splitting wood and are engineered with recessed heads to protect cable jackets. Virtually oil free for cleaner handling and manufactured to contractor preferred length. Designed to be driven into wood with a hammer.
TCM121982TB>
4.750" X 5.751" X .500" OIL SEALS - TCM47575TA >
TCM33464TA>
Blend of virgin oils, tackiness agents, anti-wear additives, plus rust and oxidation inhibitors. Has a low sulfur content.
Steel shim is made from a full hard, cold rolled, low carbon 1008-1010 steel. Precision Brand® is the only manufacturer to offer Branded® shim. It has everything the user needs to know clearly marked right on the shim: material type, material thickness and lot # for full traceability. Used in applications where hardness, flatness and accuracy are required. Material can be punched or sheared with minimum burring and distortion. Precision Brand® shim stock is widely used in the following applications: tool and die set up, alignment, new machine assembly, machine repair and maintenance; mounting of motors, pumps and other machines, short run and prototype work, along with a variety of other industrial uses. It is especially useful for pilot production runs where material accuracy and economy are important. All Precision Brand® shim products are manufactured under rigorous quality control standards to assure high accuracy and tight tolerances.
