Gardner Bender LTR-400 Liquid Waterproof Seal Electrical Tape, Rubber, Red
This rubber based brush-on liquid tape forms a protective, waterproof, UV-resistant, dielectric seal around spliced electrical wire to protect against corrosion, shortages, electrical shock and vibration. The quick drying fluid cures in 24 hours and will not deterioriate or unravel like traditional tape. Resistant to chemicals, solvents, saltwater and other common fluids, to achieve connections that last for decades. To apply, shake well then use brush built into the cap to liberally brush the liquid over the splice/connection. Allow to dry for 5 minutes and then re-apply if a thicker application is needed. Ideal for both indoor and outdoor use and under extreme environments including automotive, marine, farm/ag and RV. 4 oz bottle temp range: -30 to 200 degrees F and -34 to 93 degrees C.
-
BrandGardner Bender
-
UPC032076064020
-
Manufacturer Part NumberLTR-400
-
CountryUSA
-
Material TypeRubber
-
Maximum Operating Temperature200 deg F
-
ColorRed
-
TypeLiquid Waterproof Seal
-
Minimum Operating Temperature-30 deg F
-
Specifications MetCSA C22.1, NFPA 70/71
- Forms a protective, waterproof, UV-resistant, dielectric seal around spliced electrical wire to protect against corrosion and shortages
- Formula is resistant to chemicals, solvents, saltwater and other common fluids
- Quick drying formula cures in 24 hr
- Will not unravel or deteriorate like traditional tape
- Remains flexible in extreme temperatures and climates -30 to 200 deg F and -34 to 93 deg C
- Dries black
-
Alternative Part Number16793935
-
UNSPSC31201502
-
IDEA Index ID16793935
-
Standards/ApprovalsUS Federal Specifications 29 CFR 1910.1200
-
Warranty1 year
-
Specification Sheet
Recently Viewed
This rubber based brush-on liquid tape forms a protective, waterproof, UV-resistant, dielectric seal around spliced electrical wire to protect against corrosion, shortages, electrical shock and vibration. The quick drying fluid cures in 24 hours and will not deterioriate or unravel like traditional tape. Resistant to chemicals, solvents, saltwater and other common fluids, to achieve connections that last for decades. To apply, shake well then use brush built into the cap to liberally brush the liquid over the splice/connection. Allow to dry for 5 minutes and then re-apply if a thicker application is needed. Ideal for both indoor and outdoor use and under extreme environments including automotive, marine, farm/ag and RV. 4 oz bottle temp range: -30 to 200 degrees F and -34 to 93 degrees C.
Browning® 1111806 A Plate Sprocket, 40 Chain, 26 Teeth, For Use With T35L Torque Limiters, 4.42 in OD
Browning® 1111806 A Plate Sprocket, 40 Chain, 26 Teeth, For Use With T35L Torque Limiters, 4.42 in OD
Krylon® A03821007 Industrial Marking Paint, 17 oz Container, Solvent Form, High Visibility Yellow, 468 Linear ft Coverage, 3 min Curing
2" -FACE 1/4" -CBM 0-30/PSI GAUGES-DXNGC215 >
Paint or refresh parking lots, stadiums, athletic facilities and more with Rust-Oleum High Performance 2300 System Traffic Zone Striping Paint. Apply this weather-resistant coating to concrete, gravel or pavement for durability you can count on.
Browning® 1296540 Automatic Torque Limiter, 1-1/2 in Straight Bore, 5-1/2 in OD, 3800 in-lb (1 Spring)/6800 in-lb (2 Spring) Torque
Browning® torque limiters are torque control devices that slip under excessive load but automatically carry the desired load after the excess has been removed. The device can be easily adjusted to slip at a desired overload and automatically re-engage when overload is removed. Overload should be removed promptly since prolonged slippage can be detrimental to the friction disc. Generally, no resetting is required after the torque limiter has slipped. Torque limiters help prevent machine and product damage and costly downtime caused by shock loads, overloads or machine jams but should not be used as clutches.
