Crosby Group

Series / Model: G-291 (Regular Nut, Straight-Line Pull) Diameter (Thread Size): 5/16" Shank Length: 2-1/4" Material: Forged Carbon Steel (Quenched & Tempered )Finish: Hot-Dip Galvanized

Working Load Limit (WLL): 5,200 lbs (2.6 tons) for secure, in-line pulls. Material: Forged carbon steel, which is quenched and tempered for high structural reliability. Coating: Hot-dip galvanized finish providing robust environmental and rust resistance. Threading: Standard unified coarse threading (UNC). Hardware Included: Shipped complete with a matching, hot-dip galvanized hex nut.

The Crosby G-291 3/4x12 (Crosby Stock Number 1043659) is a premier, heavy-duty Regular Nut Eye Bolt engineered specifically for straight-line, in-line industrial lifting and rigging applications.

Crosby Eye Bolt, Series: G-291, Measurement System: Imperial, 1/4 in Thread, 2 in Shank Length, Forged Steel, Hot Dipped Galvanized, 1/2 in ID Eye, 1 in OD Eye, UNC Thread, 3.06 in Overall Length, 650 lb Working Load, 1-1/2 in Thread Length

Fatigue rated at 1-1/2 times the working load limit at 20000 cycles
Hot dip galvanized after threading (UNC)
Furnished with standard hot dip galvanized hex nuts
Recommended for in-line pull
Importantly, these bolts meet other critical performance requirements including fatigue life, impact properties and material traceability

Forged Steel Quenched & Tempered Regular Eye Bolt. Recommended For In-Line Pull. Fatigue Rated At 1-1/2 Times. The WLL at 20000 Cycles. Meets Or Exceeds All Requirements of ASME B30.26

Material: Forged steel, quenched, and tempered. Application: Recommended primarily for straight, in-line pulls. Finish: Hot dip galvanized after threading Safety Factor: Fatigue rated at 1.5 times the Working Load Limit (WLL) for 20,0

Heavy-duty, bolt-type carbon steel anchor shackle featuring a Working Load Limit (WLL) of 6.5 tons (14,300 lbs). It is built for permanent or long-term rigging and towing applications because its bolt, nut, and cotter pin design prevents the pin from loosening under high vibration or load movement.

The Crosby G-2130 5/8" is a premium, hot-dip galvanized carbon steel bolt-type anchor shackle designed for high-security, long-term, or permanent rigging installations. It features a safety-focused mechanism consisting of an alloy steel load pin, a hex nut, and a secure cotter pin to prevent the pin from backing out under rotating or sliding loads.

The Crosby G-2130 3/4" is a heavy-duty, bolt-type carbon steel anchor shackle (part number 1019515) featuring a 4.75-ton (10,450 lbs) Working Load Limit (WLL) and a 6:1 design safety factor. It incorporates a hot-dip galvanized finish for long-term corrosion resistance and uses a secure alloy steel bolt, nut, and cotter pin configuration to prevent pin rotation or loosening under vibrating or dynamic loads.

1/2" 2-TON-LOAD-CAPACITY (4,000-POUND) BOLT-STYLE ANCHOR SHACKLE

Crosby G-2130 Bolt Type Anchor Shackles are forged, quenched & tempered Grade 6 shackles with an alloy bolt, nut, and cotter pin for secure, semi-permanent rigging connections. Each unit is proof-tested, fatigue rated, and built to exceed industry standards for strength, consistency, and traceability. The G-series shackles feature the iconic Red Pin®—

The Crosby G-213 7/8" is a heavy-duty, hot-dip galvanized carbon steel round pin anchor shackle manufactured by Kito Crosby. This specific industrial rigging model features a 7/8-inch nominal body thickness and a 1-inch alloy steel pin secured by a removable cotter pin

The Crosby G-213 1-1/4" is a heavy-duty, hot-dip galvanized carbon steel round pin anchor shackle. Part of the industry-recognized lineup from Kito Crosby, it is forged, quenched, and tempered with an alloy steel pin to handle demanding tie-down, towing, or overhead lifting applications. Key Specifications Working Load Limit (WLL): 12 tons (26,400 lbs). Design/Safety Factor: 6:1. Shackle Size (Body Thickness): 1-1/4 inches. Pin Diameter: 1.38 inches. Pin Type: Round pin with a cotter pin. Throat Width (Opening between ears): 2.03 inches. Throat Depth (Inside length): 4.69 inches.

Working Load Limit: 2 tons
Safety Factor: 6:1
Inside Width: 1.31"
Inside Height: 1.88"
Mouth Width: 0.81"
Shackle Size: 1/2"
Pin Size: 5/8"
Material: Carbon Steel Shackle
Alloy Pin
Finish: Galvanized
Type: Round Pin Anchor
Product Weight: .7 lbs.
Standards: Meets or exceeds all requirements of Federal Specification RR-C-271 & ASTM A148M.

The Crosby G-210 Straight-Side Screw Pin Chain Shackle is a reliable, high-strength rigging solution for in-line connections where space is limited. Featuring a narrow, straight-sided body and Crosby’s signature Red Pin® alloy screw pin, each shackle is forged, quenched, and tempered for strength and durability. The G-210 is hot-dip galvanized and proudly made in the USA, with the Working Load Limit (WLL) and Grade 6 permanently marked on every shackle.
This shackle is fatigue rated to 20,000 cycles at 1.5x WLL and meets or exceeds the performance requirements of ASME B30.26 and Federal Spec RR-C-271H. It is approved for use in a wide temperature range from -40°F to 400°F

Crosby G-209 Screw Pin Anchor Shackles are the industry standard for everyday rigging, lifting, and towing applications. Forged, quenched & tempered from high-strength steel and equipped with an alloy pin, these Grade 6 shackles are proof-tested, fatigue rated, and built to perform under demanding field conditions. All G-209 shackles feature the Red Pin®

Crosby G-209 Screw Pin Anchor Shackles are the industry standard for everyday rigging, lifting, and towing applications. Forged, quenched & tempered from high-strength steel and equipped with an alloy pin, these Grade 6 shackles are proof-tested, fatigue rated, and built to perform under demanding field conditions. All G-209 shackles feature the Red Pin

The Crosby G-209 5/8" is a heavy-duty, hot-dip galvanized screw pin anchor shackle featuring a 3.25-ton (6,500 lbs) Working Load Limit (WLL). Forged, quenched, and tempered by Kito Crosby, it is a industry-standard rigging component easily identified by its signature Red Pin®

The Crosby G209 5/16" is a hot-dip galvanized carbon steel screw pin anchor shackle with a Working Load Limit (WLL) of 3/4 ton (0.75 metric tons / 1,650 lbs). It is a standard for everyday rigging, towing, and temporary lifting application

Crosby G-209 Screw Pin Anchor Shackles are the industry standard for everyday rigging, lifting, and towing applications. Forged, quenched & tempered from high-strength steel and equipped with an alloy pin, these Grade 6 shackles are proof-tested, fatigue rated, and built to perform under demanding field conditions. All G-209 shackles feature the Red Pin®

The Crosby G-209 3/4" is a premium, hot-dip galvanized screw pin anchor shackle manufactured by Kito Crosby. Widely considered an industry standard for rigging, towing, and overhead lifting, this specific model features the iconic Red Pin® as a hallmark of genuine manufacturing quality.

The Crosby G-209 3/16" is a high-quality screw pin anchor shackle manufactured by Kito Crosby. This industry-standard hardware piece is forged, quenched, and tempered from high-strength carbon steel, featuring a distinct alloy steel "Red Pin" for quick identity confirmation. It is specifically built for quick, temporary connections in dynamic overhead lifting, tie-down, towing, or suspension environments.

The Crosby G-209 2-1/2" Screw Pin Anchor Shackle is a heavy-duty, forged steel rigging component with a 55-ton Working Load Limit

The Crosby G-209 1/4" is a premium, high-strength screw pin anchor shackle designed for quick, temporary connections in tie-down, towing, suspension, or lifting applications. It features an industry-standard 0.5-ton (1,100 lbs) working load limit (WLL) and is instantly recognizable by Crosby's trademark Red Pin®