Crosby Group

Fist Grip® wire rope clips from Crosby® differ from traditional wire rope clips, with bolts and heavy hex nuts comprising the design. This allows for the nuts to be installed in a way that lets the operator swing the wrench in a full arc for quick install. Saddles are forged steel, with the entire clip galvanized for corrosion resistance.

Provides an efficiency rating of 80% for sizes 3/16" - 7/8", and 90% for sizes 1" - 1-1/2". All sizes meet or exceed all requirements of ASME B30.26 including identification, ductility, design factor, proof load and temperature requirements. All sizes also meet additional critical performance requirements including fatigue life, impact properties and material traceability, not address by ASME B30.26.

Fist Grip® wire rope clips from Crosby® differ from traditional wire rope clips, with bolts and heavy hex nuts comprising the design. This allows for the nuts to be installed in a way that lets the operator swing the wrench in a full arc for quick install. Saddles are forged steel, with the entire clip galvanized for corrosion resistance.

Provides an efficiency rating of 80% for sizes 3/16" - 7/8", and 90% for sizes 1" - 1-1/2". All sizes meet or exceed all requirements of ASME B30.26 including identification, ductility, design factor, proof load and temperature requirements. All sizes also meet additional critical performance requirements including fatigue life, impact properties and material traceability, not address by ASME B30.26.

he Crosby G-429 1/2" refers to the 1/2-inch Galvanized Fist Grip® Wire Rope Clip manufactured by Kito Crosby. Unlike traditional U-bolt style clips, this heavy-duty dual-saddle clamp features integral bolts and nuts that allow for rapid installation and eliminate the risk of installing the clip upside down

A heavy-duty, hot-dip galvanized Fist Grip® wire rope clip.

The Crosby G-414 5/8" is a hot-dip galvanized, extra heavy-duty wire rope thimble designed to protect wire rope eyes from wear, crushing, and deformation. Manufactured by The Crosby Group, it is a non-load-bearing rigging component used to maintain the shape of a loop or eye in a wire rope assembly under tension.

Crosby G-414 extra heavy wire rope thimbles provide a long service life and protect against wear and deformation of the wire rope eye. Hot Dip galvanized steel
Long service life
Protection against wear and deformation
Specifications:

"Crosby® Thimble, Standard, Series: G-411, 3/16 in Wire Rope Dia, Steel, Hot Dipped Galvanized, For Use With: Wire Rope".

The Crosby G-403 5/8" is a heavy-duty, hot-dip galvanized Jaw & Eye Swivel engineered as a positioning device to prevent lifting lines, wire ropes, and slings from twisting and binding.

"Crosby 4035/16" does not pull up a direct product match in the official Kito Crosby rigging and lifting catalog. Because these numbers are highly relevant across multiple separate industrial part systems, it is likely a combination of a brand name and a specific size or a cross-referenced component.

The Crosby G-403 7/8" is a heavy-duty, hot-dip galvanized Jaw & Eye Positioning Swivel. Manufactured from quenched and tempered forged steel, this rigging component is specifically engineered as a positioning device to align your load assembly before lifting. It features a safety factor of 5:1 and is fully certified under the ASME B30.26 standard.

The Crosby G-403 3/4" is a heavy-duty Jaw End Swivel used as a positioning device in rigging, lifting, and wire rope assemblies. It connects inline components to prevent line twisting and reduce torque on rigging setups.

Working Load Limit (WLL): 850 lbs (approx. 385 kg) Safety Factor: 5:1 design ratio (Ultimate break strength of 4,250 lbs)Material: Forged steel, quenched and tempered Finish: Hot-dip galvanized for enhanced corrosion resistance Connection Type: Jaw-to-eye configuration with a 1/4-inch pin and retention cotter pin Dimensions: 2.63 inches width between eyes, 0.69" to 0.88" eye length

Product Type: Jaw & Eye Swivel (Model G-403).Size (Diameter): 1/2 inch. Working Load Limit (WLL): 3,600 lbs (1.8 short tons). Material: Forged carbon steel, quenched and tempered for maximum durability .Finish: Hot-dip galvanized for high corrosion resistance.

The Crosby G-402 3/8" Regular Swivel (Manufacturer Part Number: 1016055) is a premium, heavy-duty eye-to-eye rigging component designed primarily as a positioning device to prevent the twisting and binding of slings, wire ropes, and inline connections. It is critical to note that this specific model is a positioning device only and is not engineered to rotate while under active load.

The Crosby G-341 1-3/8" is a weldless pear-shaped master sling link designed for high-capacity industrial rigging, wire rope assemblies, and chain sling connections.

The Crosby G-335 (5/8") is a heavy-duty, hot-dip galvanized "Missing Link"® replacement connecting link used to repair, connect, or extend 5/8-inch chains. Manufactured by The Crosby Group under stock number 1013236, this item serves as a temporary or permanent bridge for non-overhead rigging and tie-down applications.>

The Crosby G-335 5/16" is a hot-dip galvanized, drop-forged carbon steel connecting link, famously trademarked as the "Missing Link"®. It is manufactured by the Kito Crosby Group under the specific Stock Number 1013138. It is primarily engineered to repair low-grade carbon steel chains or to bridge connections between a chain and end-fittings like master links or hooks.

Working Load Limit (WLL): 2,750 lbs (1.25 metric tons) Design Factor: 4:1 safety margin (Ultimate load is 4 times the WLL) dMaterial: Forged carbon steel, quenched and tempered for optimal durability

The Crosby G-335 3/16" is a hot-dip galvanized "Missing Link"® chain repair connecting link manufactured by Kito Crosby. It is specifically engineered to repair or join lengths of non-lifting chain in tie-down, towing, and general load securement setups

Trade Size: 1/4 inch (also covers 9/32" applications depending on the chain standard). Working Load Limit (WLL): 1,325 lbs (0.66 tons) with a standard 4:1 design factor .Material: Quenched and tempered drop-forged steel with a hot-dip galvanized finish for weather and corrosion resistance. Design: Interlocking halves are joined together by integral rivets rather than interlocking lugs, making the overall profile highly compact.

he Crosby G-341 1/2" (often typed as G3341/2) is a 1/2-inch hot-dip galvanized weldless pear-shaped sling link manufactured by Kito Crosby. It is primarily used as an intermediate or connecting point in wire rope and chain sling rigging configurations.

The Crosby G-277 Shoulder Nut Eye Bolts are premium forged lifting points engineered for secure through-bolted lifting applications. Each unit is forged from quenched and tempered steel, hot-dip galvanized for corrosion protection, and supplied with a heavy hex nut for proper clamping and seating. Designed for both in-line and angular loading (with capacity reduction), the G-277 meets or exceeds all ASME B30.26 requirements for identification, ductility, design factor, and proof load performance.

Brand / Manufacturer: Kito Crosby Product Series: G-291 (Regular Nut Eye Bolt without shoulder ) Crosby Stock Number: 1043515Thread / Shank Size: 5/8" - 11 UNC Shank Length: 8.00 inches Working Load Limit (WLL): 5,200 lbs (when used for a straight, in-line pull) Material & Finish: Quenched and tempered forged steel, hot-dip galvanized after threading.

The Crosby G-277 Shoulder Nut Eye Bolts are premium forged lifting points engineered for secure through-bolted lifting applications. Each unit is forged from quenched and tempered steel, hot-dip galvanized for corrosion protection, and supplied with a heavy hex nut for proper clamping and seating. Designed for both in-line and angular loading (with capacity reduction), the G-277 meets or exceeds all ASME B30.26 requirements for identification, ductility, design factor, and proof load performance.