G-2130-1-1/2 CROSBY 1-1/2" 17-T ANCHOR SHACKLE
Crosby G-2130 Bolt Type Anchor Shackles are forged, quenched & tempered Grade 6 shackles with an alloy bolt, nut, and cotter pin for secure, semi-permanent rigging connections. Each unit is proof-tested, fatigue rated, and built to exceed industry standards for strength, consistency, and traceability. The G-series shackles feature the iconic Red Pin®—
Recently Viewed
Crosby G-2130 Bolt Type Anchor Shackles are forged, quenched & tempered Grade 6 shackles with an alloy bolt, nut, and cotter pin for secure, semi-permanent rigging connections. Each unit is proof-tested, fatigue rated, and built to exceed industry standards for strength, consistency, and traceability. The G-series shackles feature the iconic Red Pin®—
GP® 2025M Standard Length Socket, 1/2 in, 25 mm Hex Socket, 6 Points
Crosby G-209 Screw Pin Anchor Shackles are the industry standard for everyday rigging, lifting, and towing applications. Forged, quenched & tempered from high-strength steel and equipped with an alloy pin, these Grade 6 shackles are proof-tested, fatigue rated, and built to perform under demanding field conditions. All G-209 shackles feature the Red Pin®
The Crosby G-213 1-1/4" is a heavy-duty, hot-dip galvanized carbon steel round pin anchor shackle. Part of the industry-recognized lineup from Kito Crosby, it is forged, quenched, and tempered with an alloy steel pin to handle demanding tie-down, towing, or overhead lifting applications. Key Specifications Working Load Limit (WLL): 12 tons (26,400 lbs). Design/Safety Factor: 6:1. Shackle Size (Body Thickness): 1-1/4 inches. Pin Diameter: 1.38 inches. Pin Type: Round pin with a cotter pin. Throat Width (Opening between ears): 2.03 inches. Throat Depth (Inside length): 4.69 inches.
Sealmaster® two and three piece rod end bearing housing designs have been optimized for overall strength. This housing advantage and variety of outer race materials including brass, steel, Delrin® and PTFE liners provide a wide selection of application solutions. Sealmaster® rod end bearings can be joined together or connected with a threaded rod or tube as linkage assemblies for flexibility in motion transfer. In addition Sealmaster® rod end bearings can accommodate angular misalignment to provide ease in assembly and smooth motion transfer in a variety of applications.
Crosby® 1030752 HG-225-5/8 X 6 Turnbuckle, Hook/Eye, 5/8 in Thread, 2250 lb Working, 6 in Take Up, 16.61 in L Close, Steel
Crosby® 1030752 HG-225 Turnbuckle, Hook/Eye, 5/8 in Thread, 2250 lb Working, 6 in Take Up, 16.61 in L Close, Steel
