Enerpac® RC-502 General Purpose Industry Standard Single Acting Hydraulic Cylinder, 50 ton Capacity, 2 in L Stroke, 10000 psi
Enerpac® hydraulic cylinders are available in hundreds of different configurations. Whatever the industrial application lifting, pushing, pulling, bending, holding, whatever the force capacity, stroke length, or size restrictions, single- or double-acting, solid or hollow plunger, you can be sure that Enerpac® has the cylinder to suit your high force application.
-
BrandEnerpac®
-
UPC662005301607
-
Manufacturer Part NumberRC-502
-
CountryUSA
-
Capacity50 ton
-
FinishBaked Enamel
-
Pressure Rating10000 psi
-
TypeGeneral Purpose Industry Standard Single Acting
-
SeriesRC
-
Housing MaterialSteel
-
Stroke Length2 in
- RC series single acting hydraulic cylinders set the industry standard for general purpose cylinders
- Unique GR2 bearing design, reduces wear and extending life
- Collar threads, plunger threads and base mounting holes enable easy fixturing (on most models)
- Designed for use in all positions
- High strength alloy steel for durability
- Redesigned cylinder thread protector for ease of use
- Heavy duty, pretension spring improves retraction speed
- Baked enamel finish for increased corrosion resistance
- Plunger wiper reduces contamination, extending cylinder life
- All RC cylinders are equipped with hardened removable grooved saddles
- The exclusive GR2 is a unique bearing design on RC series DUO cylinders which absorbs eccentric load stresses to protect your cylinder against abrasion, over-extending or plunger blow-outs and jamming or top-end mushrooming
- 3-3/4 in cylindrical bore diameter
- 1.31 in base to advance port
- 2.81 in saddle diameter
- 0.11 in saddle protruding from plunger
- 3-3/4 in bolt circle
- 1/2-13 UN thread
- 3/4 in thread depth
- 5-12 UN collar thread
- 2.19 in collar thread length
-
UNSPSC27121602
-
Standards/ApprovalsASME B30.1
-
Instruction/Installation Manual
-
Catalog
-
Specification Sheet
Recently Viewed
Enerpac® RC-502 General Purpose Industry Standard Single Acting Hydraulic Cylinder, 50 ton Capacity, 2 in L Stroke, 10000 psi
Enerpac® hydraulic cylinders are available in hundreds of different configurations. Whatever the industrial application lifting, pushing, pulling, bending, holding, whatever the force capacity, stroke length, or size restrictions, single- or double-acting, solid or hollow plunger, you can be sure that Enerpac® has the cylinder to suit your high force application.
STORAGE BINS-RBM3603WHT>
1/2" X 3-1/2" M/D OVAL DIE SPRINGS-LANSMDO500350 >
23212-88 Radial/Deep Groove Ball Bearing - Straight Bore, 0.7500 in ID, 2.0000 in OD, 0.5625 in Width, Double Sealed, Without Snap Ring
DOUBLE SEALED BALL BEARINGS-GEN2321288>
1.625" X 2.441" X .312" OIL SEALS-NAT473367>
Sintered steel bushing on which the center member and friction facings rides are coated with a dry film lubricant; therefore, no oil is present to contaminate friction facings and reduce torque capacity. The bushing "free floats" on the hub. Morse® offers a wide selection of bushing widths in all torque limiter sizes, permitting close matching of center member and bushing width to minimize bearing pressure and promote longer bushing life.
