Power Team® RH202 RH Series Center Hole Welded Hydraulic Cylinder, 20 ton, 2 in L Stroke, 6-1/8 in H Retract, 2-1/8 in Dia Rod, 8466 psi
Power Team® RH202 RH Series Center Hole Welded Hydraulic Cylinder, 20 ton, 2 in L Stroke, 6-1/8 in H Retract, 2-1/8 in Dia Rod, 8466 psi
-
BrandPower Team®
-
Manufacturer Part NumberRH202
-
CountryUSA|Canada
-
Capacity20 ton
-
Port Size1 in
-
Pressure Rating8466 psi
-
TypeCenter Hole Welded
-
Retract6-1/8 in H
-
Rod Diameter2-1/8 in
-
SeriesRH Series
-
Dimensions3-7/8 in OD
-
Stroke Length2 in
- Most models feature threaded collar, excludes the RH203 and RHA306 models
- All cylinders are furnished with a 9796 3/8 NPT female half coupler, except the rh120
- Aluminum cylinder body and piston are featured on the RHA306 cylinder
- treated for corrosion and abrasion resistance
- All cylinders except RH120 are furnished with a 9796 3/8 in NPT female half coupler
- Aluminum cylinder body and piston are featured on the RHA306 cylinder
-
UNSPSC27121602
-
Standards/ApprovalsASME B30.1|CE Certified
-
Instruction/Installation Manual
-
Catalog
Recently Viewed
Power Team® RH202 RH Series Center Hole Welded Hydraulic Cylinder, 20 ton, 2 in L Stroke, 6-1/8 in H Retract, 2-1/8 in Dia Rod, 8466 psi
Power Team® RH202 RH Series Center Hole Welded Hydraulic Cylinder, 20 ton, 2 in L Stroke, 6-1/8 in H Retract, 2-1/8 in Dia Rod, 8466 psi
The Tapper® anchoring system is a family of screw anchors, specially designed drill bits and installation tools designed to meet the needs of most light to medium duty applications in concrete, block and brick. The Tapper® concrete screw anchor is produced in either hex washer head or Phillips flat head styles from Perma-Seal™ coated or zinc plated carbon steel and type 304 stainless steel. For heavy duty applications, the 3/8 in size is made in zinc plated carbon steel.
The Browning® torque limiter is a spring loaded friction style torque overload device. The load on the friction pads is adjusted so that the process torque is transmitted. An overload torque in excess of the set torque causes the unit to slip. This prevents overloads from transmitting through the system. When the load falls below the set level, the torque limiter stops slipping and transmits the torque. A torque limiter does not maintain phase between input and output. Although it is a similar size, the Browning® torque limiter has a higher torque density than the Morse® torque limiter. It is also well suited for applications that trip infrequently at high loads. It is most often used in a chain drive. A specially machined sprocket is inserted between the friction pads and acts as the slip interface. Torque capacity is up to 8800 in-lb.
Crown® by Aervoe® 6007 Rust Inhibitor, 16 oz Aerosol Can, Light Amber, 0.67
Prevents rust on tools, steel stock and parts. Provides temporary or extended protection of machinery. Great for long-term indoor storage.
The Mag-Torch® MT 579 is a high performance silver swirl MAP-Pro™ torch that delivers an extreme swirl flame, it has an on demand trigger giving you instant ignition and flame shut off. This torch has a safety trigger lock to prevent unwanted ignition and it also has a trigger lock for continuous flame setting. This torch can solder upto 2 in of copper.
Makita® 743012-7 Grinder Style Bulk Backing Pad, 7 in Dia Pad
