Beam Clamp Anchor Clips
S-2150-1-3/4 CROSBY 1-3/4" BOLT CHAIN SHACKLES
Working Load Limit (WLL): 25 Metric Tons (55,000 lbs). Design/Safety Factor: 6:1 structural safety margin. Material: Forged carbon steel body with a quenched and tempered alloy pin. Finish: Self-Colored (un-galvanized/painted or natural steel finish indicated by the "S" prefix). Pin Style: Thin hex-head bolt with a nut and cotter pin securement. Approximate Weight: 31.4 lbs (14.2 kg
S-2140-1-1/2 CROSBY 1-1/2" 30-T BOLT ANCHOR SHACKLES
Working Load Limit (WLL): 30 metric tons (60,000 lbs) with a built-in safety design factor. Stock Number: 1021129 (identifying the specific Crosby self-colored/painted finish model). Material: Forged alloy steel body with a quenched and tempered alloy pin. Pin Diameter: 1.63 inches (41.4 mm), consisting of a secure bolt, nut, and cotter pin configuration. Throat Measurements: Provides a 2.38-inch throat width (between ears) and a 5.75-inch throat depth. Finish: Self-colored / Painted Black (Note: Its counterpart, the G-2140, represents the hot-dip galvanized finish version). Temperature Rating: Certified for reliable use in extreme conditions ranging from
G-2130-7/8 CROSBY MATERIAL HANDLING GROUP 2-1/2" 55-TON SHACKLES
Heavy-duty, bolt-type carbon steel anchor shackle featuring a Working Load Limit (WLL) of 6.5 tons (14,300 lbs). It is built for permanent or long-term rigging and towing applications because its bolt, nut, and cotter pin design prevents the pin from loosening under high vibration or load movement.
G-2130-5/8 CROSBY 5/8" 3-1/4-TON SHACKLES
The Crosby G-2130 5/8" is a premium, hot-dip galvanized carbon steel bolt-type anchor shackle designed for high-security, long-term, or permanent rigging installations. It features a safety-focused mechanism consisting of an alloy steel load pin, a hex nut, and a secure cotter pin to prevent the pin from backing out under rotating or sliding loads.
G-2130-3/4 CROSBY MATERIAL HANDLING GROUP 3/4" 5-TON ANCHOR SHACKLE P
The Crosby G-2130 3/4" is a heavy-duty, bolt-type carbon steel anchor shackle (part number 1019515) featuring a 4.75-ton (10,450 lbs) Working Load Limit (WLL) and a 6:1 design safety factor. It incorporates a hot-dip galvanized finish for long-term corrosion resistance and uses a secure alloy steel bolt, nut, and cotter pin configuration to prevent pin rotation or loosening under vibrating or dynamic loads.
G-2130-1/2 CROSBY 1/2" 2-TON ANCHOR SHACKLES
1/2" 2-TON-LOAD-CAPACITY (4,000-POUND) BOLT-STYLE ANCHOR SHACKLE
G-2130-1-1/2 CROSBY 1-1/2" 17-T ANCHOR SHACKLE
Crosby G-2130 Bolt Type Anchor Shackles are forged, quenched & tempered Grade 6 shackles with an alloy bolt, nut, and cotter pin for secure, semi-permanent rigging connections. Each unit is proof-tested, fatigue rated, and built to exceed industry standards for strength, consistency, and traceability. The G-series shackles feature the iconic Red Pin®—
G-213-7/8 CROSBY MATERIAL HANDLING GROUP 7/8" 6-1/2-TON SHACKLES
The Crosby G-213 7/8" is a heavy-duty, hot-dip galvanized carbon steel round pin anchor shackle manufactured by Kito Crosby. This specific industrial rigging model features a 7/8-inch nominal body thickness and a 1-inch alloy steel pin secured by a removable cotter pin
G-213-1/4 CROSBY 1/4" 1/2-TON SHACKLES
The Crosby G-213 1-1/4" is a heavy-duty, hot-dip galvanized carbon steel round pin anchor shackle. Part of the industry-recognized lineup from Kito Crosby, it is forged, quenched, and tempered with an alloy steel pin to handle demanding tie-down, towing, or overhead lifting applications. Key Specifications Working Load Limit (WLL): 12 tons (26,400 lbs). Design/Safety Factor: 6:1. Shackle Size (Body Thickness): 1-1/4 inches. Pin Diameter: 1.38 inches. Pin Type: Round pin with a cotter pin. Throat Width (Opening between ears): 2.03 inches. Throat Depth (Inside length): 4.69 inches.
G-213-1/2 CROSBY MATERIAL HANDLING GROUP 1/2" 2-TON SHACKLES
Working Load Limit: 2 tons
Safety Factor: 6:1
Inside Width: 1.31"
Inside Height: 1.88"
Mouth Width: 0.81"
Shackle Size: 1/2"
Pin Size: 5/8"
Material: Carbon Steel Shackle
Alloy Pin
Finish: Galvanized
Type: Round Pin Anchor
Product Weight: .7 lbs.
Standards: Meets or exceeds all requirements of Federal Specification RR-C-271 & ASTM A148M.
G-210-3/8 CROSBY 3/8" 1-TON SHACKLES
The Crosby G-210 Straight-Side Screw Pin Chain Shackle is a reliable, high-strength rigging solution for in-line connections where space is limited. Featuring a narrow, straight-sided body and Crosby’s signature Red Pin® alloy screw pin, each shackle is forged, quenched, and tempered for strength and durability. The G-210 is hot-dip galvanized and proudly made in the USA, with the Working Load Limit (WLL) and Grade 6 permanently marked on every shackle.
This shackle is fatigue rated to 20,000 cycles at 1.5x WLL and meets or exceeds the performance requirements of ASME B30.26 and Federal Spec RR-C-271H. It is approved for use in a wide temperature range from -40°F to 400°F
G-209-7/8 CROSBY7/8" 6-1/2-TON SP SHACKLES
Crosby G-209 Screw Pin Anchor Shackles are the industry standard for everyday rigging, lifting, and towing applications. Forged, quenched & tempered from high-strength steel and equipped with an alloy pin, these Grade 6 shackles are proof-tested, fatigue rated, and built to perform under demanding field conditions. All G-209 shackles feature the Red Pin®
G-209-7/16 CROSBY 7/16" 1-1/2-TON SHACKLES
Crosby G-209 Screw Pin Anchor Shackles are the industry standard for everyday rigging, lifting, and towing applications. Forged, quenched & tempered from high-strength steel and equipped with an alloy pin, these Grade 6 shackles are proof-tested, fatigue rated, and built to perform under demanding field conditions. All G-209 shackles feature the Red Pin
G-209-5/8 CROSBY 5/8" 3-1/4-TON SHACKLES
The Crosby G-209 5/8" is a heavy-duty, hot-dip galvanized screw pin anchor shackle featuring a 3.25-ton (6,500 lbs) Working Load Limit (WLL). Forged, quenched, and tempered by Kito Crosby, it is a industry-standard rigging component easily identified by its signature Red Pin®
G-209-5/16 CROSBY 5/16" 3/4-TON SHACKLES
The Crosby G209 5/16" is a hot-dip galvanized carbon steel screw pin anchor shackle with a Working Load Limit (WLL) of 3/4 ton (0.75 metric tons / 1,650 lbs). It is a standard for everyday rigging, towing, and temporary lifting application
G-209-3/8 CROSBY 3/8" 1-TON ANCHOR SHACKLES
Crosby G-209 Screw Pin Anchor Shackles are the industry standard for everyday rigging, lifting, and towing applications. Forged, quenched & tempered from high-strength steel and equipped with an alloy pin, these Grade 6 shackles are proof-tested, fatigue rated, and built to perform under demanding field conditions. All G-209 shackles feature the Red Pin®
G-209-3/4 CROSBY 3/4" 4-3/4-TON SHACKLES
The Crosby G-209 3/4" is a premium, hot-dip galvanized screw pin anchor shackle manufactured by Kito Crosby. Widely considered an industry standard for rigging, towing, and overhead lifting, this specific model features the iconic Red Pin® as a hallmark of genuine manufacturing quality.
Recently Viewed
48" RISERS-PNC30965>
3-MM X 1" SOCKET INSERT BIT-ITMHE25030>
Goulds P80765 Volute Gasket
Starrett Surface Gages are designed for a wide variety of uses. This is a basic tool for machinists and toolmakers. The main uses are for accurately scribing lines, transferring measurements and for probing surfaces in inspection work. 4" Spindle, 2" x 1 1/2" Base.
50-MM 12-PT STRIKING WRENCH - ALL21224 >
70-LB PAIL WATERPROOF PATCH-DAM04702>
