Dichtomatik 75115253 O-Ring, 243 Dash Number, 4.109 in ID x 4.387 in OD, PTFE, 55 Durometer, Import, Custom 243-TEFLON
O-rings are endless, ring shaped sealing elements with a circular cross-section that are manufactured from elastomer materials or PTFE. The designation of an O-ring is derived from the dimensions of its inner diameter and cord width in millimeters, along with the name of the material and its Shore A hardness.
-
BrandDichtomatik
-
Manufacturer Part Number75115253
-
CountryUSA
-
Temperature Rating40 to 120 deg F
-
MaterialPTFE
-
ColorWhite
-
Inside Diameter4.109 in
-
Domestic/ImportImport
-
Durometer55
-
Outside Diameter4.387 in
- Good chemical resistance to aggressive acids, bases, alcohols and oils
-
UNSPSC31401503
-
Standards/ApprovalsDNV Approved|ISD Certified|NFPA Listed|PTDA Certified
-
Alternative Part NumberTEF243
-
Catalog
-
Instruction/Installation Manual
-
Specification Sheet
Recently Viewed
Dichtomatik 75115253 O-Ring, 243 Dash Number, 4.109 in ID x 4.387 in OD, PTFE, 55 Durometer, Import, Custom 243-TEFLON
O-rings are endless, ring shaped sealing elements with a circular cross-section that are manufactured from elastomer materials or PTFE. The designation of an O-ring is derived from the dimensions of its inner diameter and cord width in millimeters, along with the name of the material and its Shore A hardness.
Browning® 1073519 QD Bushing, 2-7/8 in Dia Bore, 3-13/16 in Dia Barrel, 6 in Dia Flange, 2.64 in OAL, Ductile Iron
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
FEMALE DISCONNECTS NON/INSULATED--PK/100-PENFR1B250C >
18-TOOTH #60-1 CHAIN SPROCKETS IDC 60-B-18-F-1-1/8
18 TOOTH SPROCKETS FOR #60 CHAIN
18 TOOTH SPROCKETS FOR #50 CHAIN
Dodge® 071828 415 Heavy Duty Type S2000 Pillow Block Roller Bearing Unit, 4-15/16 in Dia Bore, 15.13 to 15.88 in L Bolt Center-to-Center, 5-1/2 in Base to Bore Centerline, 17-1/2 in OAL x 11-1/8 in OAH
Unit-housed double row Dodge® S-2000 spherical roller bearings have higher ratings and long L10 life. These bearings are in cast iron housings and available in pillow block, flange, and piloted flange versions. A variety of sealing options for easy application and protection make the Dodge® S-2000 a high-capacity bearing with maximum life.
