Dichtomatik N70129 O-Ring, 129 Dash Number, 1.549 in ID x 1.755 in OD, Nitrile Rubber, 70 Shore A Durometer, Import, Custom 129
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
-
BrandDichtomatik
-
Manufacturer Part NumberN70129
-
CountryUSA
-
Temperature Rating40 to 120 deg F
-
MaterialNitrile Rubber
-
ColorBlack
-
Inside Diameter1.549 in
-
Domestic/ImportImport
-
Durometer70 Shore A
-
Outside Diameter1.755 in
- Good chemical resistance to mineral oils and greases
- The physical and chemical resistance properties of NBR materials are determined by the acrylonitrile (ACN) content of the base polymer which can vary between 18 and 50%
- Low ACN content ensures good flexibility at low temperatures, but offers limited resistance to oils and fuels
- As the ACN content increases, the low temperature flexibility reduces and the resistance to oils and fuels improves
- Physical and chemical resistance properties of NBR materials are also affected by the cure system of the polymer
- Peroxide cured materials have improved physical properties, chemical resistance and thermal properties as compared to sulfur-donor-cured materials
- Standard grades of NBR are typically resistant to mineral oil-based lubricants and greases, many grades of hydraulic fluids, aliphatic hydrocarbons, silicone oils and greases and water to about 80 deg C
- NBR is generally not resistant to aromatic and chlorinated hydrocarbons, fuels with a high aromatic content, polar solvents, glycol based brake fluids and non-flammable hydraulic fluids (HFD)
- NBR also has low resistance to ozone, weathering and aging, but in many applications this has no negative effect
-
UNSPSC31401503
-
Standards/ApprovalsDNV Approved|FDA Compliant|ISD Certified|NFPA Listed|PTDA Certified
Recently Viewed
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
United Abrasives-SAIT Saitlam F™ 73940 Close High Performance Coated Abrasive Flap Disc, 4-1/2 in Dia, 7/8 in Center Hole, 40 Grit, Coarse Grade, Zirconia Alumina Abrasive, Type 29 Conical Disc
United Abrasives-SAIT 1AX Quick Ship™ 60128 Semi-Friable Coated Abrasive Belt, 3/4 in W x 20-1/2 in L, 36 Grit, Medium Grade, Aluminum Oxide Abrasive, Cotton Backing
The United Abrasives/SAIT Sait Z-Tech™ grinding wheels offer high performance grinding for the toughest applications. The Z-Tech™ grinding wheels are composed of tough zirconium grain and internally reinforced with the highest quality fiberglass for maximum safety. Proudly manufactured in the USA.
Our most popular 1/4” grinding wheel, the United Abrasives A24R is a great choice for long lasting, general purpose grinding. The A24R is composed of a special aluminum oxide grain which assures consistent stock removal for tough applications. United Abrasives/SAIT wheels are externally reinforced with fiberglass layers to provide ultimate safety. Proudly manufactured in the USA.
The United Abrasives/SAIT Sait Z-Tech™ grinding wheels offer high performance grinding for the toughest applications. The Z-Tech™ grinding wheels are composed of tough zirconium grain and internally reinforced with the highest quality fiberglass for maximum safety. Proudly manufactured in the USA.
