Dichtomatik N70116 O-Ring, 116 Dash Number, 0.737 in ID x 0.943 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
-
BrandDichtomatik
-
Manufacturer Part NumberN70116
-
CountryUSA
-
Temperature Rating40 to 120 deg F
-
MaterialNitrile Rubber
-
ColorBlack
-
Inside Diameter0.737 in
-
Domestic/ImportImport
-
Durometer70 Shore A
-
Outside Diameter0.943 in
- Good chemical resistance to mineral oils and greases
- The physical and chemical resistance properties of NBR materials are determined by the acrylonitrile (ACN) content of the base polymer which can vary between 18 and 50%
- Low ACN content ensures good flexibility at low temperatures, but offers limited resistance to oils and fuels
- As the ACN content increases, the low temperature flexibility reduces and the resistance to oils and fuels improves
- Physical and chemical resistance properties of NBR materials are also affected by the cure system of the polymer
- Peroxide cured materials have improved physical properties, chemical resistance and thermal properties as compared to sulfur-donor-cured materials
- Standard grades of NBR are typically resistant to mineral oil-based lubricants and greases, many grades of hydraulic fluids, aliphatic hydrocarbons, silicone oils and greases and water to about 80 deg C
- NBR is generally not resistant to aromatic and chlorinated hydrocarbons, fuels with a high aromatic content, polar solvents, glycol based brake fluids and non-flammable hydraulic fluids (HFD)
- NBR also has low resistance to ozone, weathering and aging, but in many applications this has no negative effect
-
UNSPSC31401503
-
Standards/ApprovalsDNV Approved|FDA Compliant|ISD Certified|NFPA Listed|PTDA Certified
Recently Viewed
Dichtomatik N70116 O-Ring, 116 Dash Number, 0.737 in ID x 0.943 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
Weiler® 01075 TLN-6 Narrow Face Wheel Brush, 6 in Dia Brush, 3/4 in W Face, 0.014 in Dia Filament/Wire Crimped Filament/Wire, 1/2 to 5/8 in Arbor Hole
Weiler® 01075 TLN-6 Narrow Face Wheel Brush, 6 in Dia Brush, 3/4 in W Face, 0.014 in Dia Filament/Wire Crimped Filament/Wire, 1/2 to 5/8 in Arbor Hole
1" PLASTIC-HANDLE FOAM PAINT BRUSH-JWH780710 >
The exclusive, patent pending ToughTrack™ tooth design on our framing and ripping blades is engineered to deliver straight, accurate cuts over the life of the blade. Patented body slots reduce vibration, which works with the blade thin kerf design to deliver exceptional user feel. The reinforced shoulder is designed for strength and durability by providing impact resistance against nail embedded wood.
EATON CHFCAF120 Type CH Branch Feeder Combination AFCI Circuit Breaker, 120/240 VAC, 20 A, 10 kA Interrupt, 1 Poles
EATON CH ground fault current interrupters (GFCIs) are 3/4 in W and provide superior safety over a standard electrical outlet in areas where electricity may come into contact with water. GFCIs are required in any application near water such as kitchen countertops, bathrooms, swimming pools, hot tubs and outdoor receptacles. They immediately break the circuit when electrical current leakage is detected, reducing the risk of shock and electrocution.
Crosby® 1031378 HG-226-5/8 X 6 Turnbuckle, Eye/Eye, 5/8 in Thread, 3500 lb Working, 6 in Take Up, 16.72 in L Close, Steel
Crosby® 1031378 HG-226 Turnbuckle, Eye/Eye, 5/8 in Thread, 3500 lb Working, 6 in Take Up, 16.72 in L Close, Steel
