Gardner Bender PS-150 UV-Resistant Electrical Staple, 10 AWG, 12 AWG, 14 AWG Cable, Plastic
These polyethylene staples with zinc plated nails are designed to offer fast and easy installation when securing most types of non-metallic cables. The zinc plated nails not only resist rust and corrosion but drive together for fast installation with a hammer while the recessed heads ensure minimum exposure and avoid snags. The smooth polyethylene saddle protects wire and will not rust, rot or deteriorate. Use to attach all NM cable to joists, framing and other wood installations.
-
BrandGardner Bender
-
UPC032076661502
-
Manufacturer Part NumberPS-150
-
CountryUSA
-
Cable TypeAC/BX/MC/NM/UF
-
MaterialPlastic
-
ColorWhite
-
TypeUV-Resistant
-
Cable Size10 AWG, 12 AWG, 14 AWG
- Secures two conductor 10 AWG, 12 AWG and 14 AWG non-metallic BX, MC, AC and UF cable to wood surfaces
- Smooth saddle edges prevent damage to cable insulation
- Fast and easy to install both nails drive together without splitting wood
- Nail heads are recessed for minimum exposure
- UV-resistant polyethylene saddle will not rust, rot or deteriorate
- Zinc plated nails-resistant rust and corrosion
- For non-metallic cables
| Cross-Reference Number |
|---|
| 504305 |
-
Alternative Part Number16793269
-
UNSPSC31162404
-
IDEA Index ID16793269
-
Standards/ApprovalscULus Listed
-
Warranty1 year
-
Specification Sheet
Recently Viewed
Gardner Bender PS-150 UV-Resistant Electrical Staple, 10 AWG, 12 AWG, 14 AWG Cable, Plastic
These polyethylene staples with zinc plated nails are designed to offer fast and easy installation when securing most types of non-metallic cables. The zinc plated nails not only resist rust and corrosion but drive together for fast installation with a hammer while the recessed heads ensure minimum exposure and avoid snags. The smooth polyethylene saddle protects wire and will not rust, rot or deteriorate. Use to attach all NM cable to joists, framing and other wood installations.
36" FLAGGED BROOM HEADS-FLP4836>
Browning® offers a comprehensive line of off the shelf gears, including spur, miter and bevel as well as change gears. These are available in 20 deg pressure angle from 20 to 4 diametral pitch and 14.5 deg pressure angle from 48 to 3 diametral pitch. They are all designed to increase output, reduce costs and avoid the need for custom specials.
3 GROOVE 3-V-BELT QUICK DISCONNECT JA-BUSH SHEAVES-BRW33V280JA >
Bore Diameter: 50 mm (inner diameter) Outside Diameter: 110 mm Width: 27 mm Seals: Dual rubber contact seals (-2RS / -2RS1) to keep dust out and grease in Clearance: Often sold with C3 internal clearance for higher thermal expansion
DRILLCO 400N126 Type B Heavy Duty Jobber Length Drill Bit, 13/32 in Drill - Fraction, 0.4062 in Drill - Decimal Inch, 135 deg Point, HSS, Oxide Treated
Nitro® drills (NAS Type B) offer superior performance over standard HSS drills. Heavy-duty design increases tool life and performance. 135° Split Point reduces walking at the point. Ideal for both hand held and CNC Operations. Black & Gold.
