6310-2-RS Double Sealed Radial Bearing
Bore Diameter: 50 mm (inner diameter) Outside Diameter: 110 mm Width: 27 mm Seals: Dual rubber contact seals (-2RS / -2RS1) to keep dust out and grease in Clearance: Often sold with C3 internal clearance for higher thermal expansion
Recently Viewed
Bore Diameter: 50 mm (inner diameter) Outside Diameter: 110 mm Width: 27 mm Seals: Dual rubber contact seals (-2RS / -2RS1) to keep dust out and grease in Clearance: Often sold with C3 internal clearance for higher thermal expansion
Hougen® Rotabroach® 12252 12000 Annular Cutter, 1-5/8 in Dia Cutter, 2 in D Cutting, M2 HSS, Bright, Weldon with 2-Flat Shank
Hougen "12000 Series" cutters were the original annular cutters invented over 35 years ago. With the most features of any annular cutter, "12000 Series" cutters provide the best performance in the largest variety of materials. Compared to traditional tooling (twist drills, etc.) "12000 Series" cutters can multiply your cutting speed by up to 3 times. And you get longer tool life, a more accurate hole, a better finish, with no burrs. Hougen cutters maximize feed rates because up to 10 cutting edges distribute the cutting load evenly. "12000 Series" cutters convert a smaller area to chips, requiring less horsepower and thrust.
DeWALT® compact jig saw kit combines proven technologies and continually optimized features to deliver maximum strength and superior performance. The 5.5 a motor ensures power cuts in even the hardest materials. Users can optimize cutting speed with a variable speed feature ranging from 0 to 3100 spm. 4-position orbital action increases speed and aggressiveness of cuts even more. This DeWALT® saw is equipped with a keyless blade clamp, so you won't lose time on complicated blade installation and removal. These features mean that the compact jig saw kit will live up to your expectations, no matter what the job.
Browning® offers a comprehensive line of off-the-shelf gears, including spur, miter, bevel and change gears. These are available in 20 deg pressure angle from 20 to 4 diametral pitch and 14-1/2 deg pressure angle from 48 to 3 diametral pitch. They are all designed to increase output, reduce costs and avoid the need for custom specials.
BBI 644175 Partially Threaded Hex Bolt, M16x2, 90 mm L Under Head, 8.80 Grade, Medium Carbon Steel, Plain
BBI 644175 Partially Threaded Hex Bolt, M16x2, 90 mm L Under Head, 8.80 Grade, Medium Carbon Steel, Plain
1-3/16" -ID 3-BOLT FLANGE UNIT-BRWVF3E119M >
